Skip to main content
Ch. 31 - Maxwell's Equations and Electromagnetic Waves
Giancoli Douglas - Physics for Scientists and Engineers 5th edition
Giancoli Douglas5th editionPhysics for Scientists and EngineersISBN: 9780137488179Non è quello che usi tu?Cambia libro di testo
Tutti i libri di testoGiancoli Douglas 5th editionCh. 31 - Maxwell's Equations and Electromagnetic WavesProblema 66
Capitolo 30, Problema 66

Show that displacement current, ε₀ (dΦE/dt), has the SI units of amperes.

Guida verificata passo dopo passo
1
Start by recalling the formula for displacement current: \( I_d = \varepsilon_0 \frac{d\Phi_E}{dt} \), where \( \varepsilon_0 \) is the permittivity of free space, and \( \frac{d\Phi_E}{dt} \) is the rate of change of electric flux.
The SI unit of \( \varepsilon_0 \) (permittivity of free space) is \( \text{F/m} \) (farads per meter). A farad (F) is defined as \( \text{C/V} \) (coulombs per volt). Therefore, \( \varepsilon_0 \) has units of \( \text{C/(V·m)} \).
The electric flux \( \Phi_E \) is defined as \( \Phi_E = E \cdot A \), where \( E \) is the electric field (units: \( \text{V/m} \)) and \( A \) is the area (units: \( \text{m}^2 \)). Thus, \( \Phi_E \) has units of \( \text{V·m} \).
The rate of change of electric flux, \( \frac{d\Phi_E}{dt} \), has units of \( \text{V·m/s} \).
Now, multiply \( \varepsilon_0 \) (units: \( \text{C/(V·m)} \)) by \( \frac{d\Phi_E}{dt} \) (units: \( \text{V·m/s} \)). The \( \text{V} \) and \( \text{m} \) terms cancel appropriately, leaving \( \text{C/s} \), which is the SI unit of current (amperes). Thus, \( I_d \) has units of amperes.

Risposta video verificata per un problema simile:

Questa soluzione video è stata consigliata dai nostri tutor come utile per risolvere questo problema.
Durata del video:
5m

Concetti chiave

Ecco i concetti essenziali che devi comprendere per rispondere correttamente alla domanda.

Displacement Current

Displacement current is a term introduced by James Clerk Maxwell to account for changing electric fields in situations where there is no actual flow of charge, such as in capacitors. It is defined mathematically as ε₀ (dΦE/dt), where ε₀ is the permittivity of free space and dΦE/dt is the rate of change of electric flux. This concept is crucial for understanding how electric and magnetic fields interact in electromagnetic theory.
Video consigliato:
Percorso guidato
06:13
Displacement vs. Distance

Electric Flux

Electric flux (ΦE) is a measure of the electric field passing through a given area. It is calculated as the product of the electric field (E) and the area (A) through which it passes, adjusted for the angle between the field lines and the normal to the surface. The unit of electric flux is volt-meters (V·m), which is equivalent to newton-meters squared per coulomb (N·m²/C), and it plays a key role in Faraday's law of electromagnetic induction.
Video consigliato:
Percorso guidato
05:43
Electric Flux

SI Units of Current

The SI unit of electric current is the ampere (A), which is defined as the flow of one coulomb of charge per second. In the context of displacement current, showing that ε₀ (dΦE/dt) has the units of amperes involves analyzing the units of each component: ε₀ has units of farads per meter (F/m), and dΦE/dt has units of volts-meters per second (V·m/s). Through dimensional analysis, it can be demonstrated that the resulting units simplify to amperes.
Video consigliato:
Percorso guidato
03:18
Introduction to Units & the SI System
Pratica correlata
Domanda del libro di testo

What is the maximum power level of a radio station so as to avoid electrical breakdown of air at a distance of 0.75 m from the transmitting antenna? Assume the antenna is a point source. Air breaks down in an electric field of about 3 x 10⁶ V/m.

1600
views
Domanda del libro di testo

Imagine that a steady current I flows in a straight cylindrical wire of radius R₀ and resistivity ρ.

(a) If the current is then changed at a rate dI/dt, show that a displacement current ID exists in the wire of magnitude ε₀ρ(dI/dt).

(b) If the current in a copper wire is changed at the rate of 1.0 A/ms, determine the magnitude of ID.

(c) Determine the magnitude of the magnetic field BD created by ID at the surface of a copper wire with R₀ = 1.00 mm. Compare (as a ratio) BD with the field created at the surface of the wire by a steady current of 1.0 A.

65
views
Domanda del libro di testo

What length of antenna would be appropriate for a portable device that could receive satellite TV?

57
views
Domanda del libro di testo

Suppose a 25-kW radio station emits EM waves uniformly in all directions. What is the rms voltage induced in a 1.0-m-long vertical car antenna (c) 1.0 km away, (d) 50 km away?

1174
views
Domanda del libro di testo

A powerful laser portrayed in a movie provides a 3-mm-diameter beam of green light with a power of 3 W. A good agent inside a spacecraft aims the laser beam at an enemy astronaut hovering outside. The mass of the enemy astronaut is 120 kg and the spacecraft 185,000 kg. (a) Determine the “radiation-pressure” force exerted on the enemy by the laser beam assuming her suit is perfectly reflecting. (b) If the enemy is 30 m from the spacecraft’s center of mass, estimate the gravitational force the spacecraft exerts on the enemy. (c) Which of the two forces is larger, and by what factor?

1866
views
Domanda del libro di testo

The average intensity of a particular TV station’s signal is 1.0 x 10-13 W/m2 when it arrives at a 33-cm-diameter satellite TV antenna. (a) Calculate the total energy received by the antenna during 3.0 hours of viewing this station’s programs. (b) Estimate the amplitudes of the E and B fields of the EM wave.

57
views