Skip to main content
Ch 19: Work, Heat, and the First Law of Thermodynamics
Knight Calc - Physics for Scientists and Engineers 5th Edition
Knight Calc5th EditionPhysics for Scientists and EngineersISBN: 9780137344796Non è quello che usi tu?Cambia libro di testo
Tutti i libri di testoKnight Calc 5th EditionCh 19: Work, Heat, and the First Law of ThermodynamicsProblema 78
Capitolo 19, Problema 78

10 g of aluminum at 200°C and 20 g of copper are dropped into 50 cm3 of ethyl alcohol at 15°C. The temperature quickly comes to 25°C. What was the initial temperature of the copper?

Guida verificata passo dopo passo
1
Identify the principle of conservation of energy: The heat lost by the aluminum and copper will equal the heat gained by the ethyl alcohol, assuming no heat is lost to the surroundings.
Write the heat transfer equation for each material: For aluminum and copper, the heat lost is given by \( Q = m c \Delta T \), and for ethyl alcohol, the heat gained is also \( Q = m c \Delta T \).
Express the heat transfer for each material: For aluminum, \( Q_{Al} = m_{Al} c_{Al} (T_{Al,initial} - T_{final}) \); for copper, \( Q_{Cu} = m_{Cu} c_{Cu} (T_{Cu,initial} - T_{final}) \); and for ethyl alcohol, \( Q_{EA} = m_{EA} c_{EA} (T_{final} - T_{EA,initial}) \).
Set up the energy conservation equation: \( Q_{Al} + Q_{Cu} = Q_{EA} \). Substitute the expressions for \( Q \) from the previous step into this equation.
Solve for the initial temperature of copper \( T_{Cu,initial} \): Rearrange the equation to isolate \( T_{Cu,initial} \), substituting the known values for masses, specific heats, and temperatures. Be sure to convert the volume of ethyl alcohol to mass using its density.

Risposta video verificata per un problema simile:

Questa soluzione video è stata consigliata dai nostri tutor come utile per risolvere questo problema.
Durata del video:
8m

Concetti chiave

Ecco i concetti essenziali che devi comprendere per rispondere correttamente alla domanda.

Heat Transfer

Heat transfer is the process of thermal energy moving from one object to another due to a temperature difference. In this scenario, heat flows from the aluminum and copper to the ethyl alcohol until thermal equilibrium is reached. Understanding how heat is exchanged is crucial for solving problems involving temperature changes in different materials.
Video consigliato:
Percorso guidato
05:14
Overview of Heat Transfer

Specific Heat Capacity

Specific heat capacity is the amount of heat required to raise the temperature of a unit mass of a substance by one degree Celsius. Each material has a unique specific heat capacity, which affects how much its temperature changes when heat is added or removed. This concept is essential for calculating the final temperatures of the aluminum, copper, and ethyl alcohol in the given problem.
Video consigliato:
Percorso guidato
06:50
Specific Heat & Temperature Changes

Thermal Equilibrium

Thermal equilibrium occurs when two or more bodies in thermal contact reach the same temperature, resulting in no net heat flow between them. In this problem, the aluminum, copper, and ethyl alcohol reach a common temperature of 25°C. Understanding thermal equilibrium helps in applying the principle of conservation of energy to find unknown initial temperatures.
Video consigliato:
Percorso guidato
05:21
Volume Thermal Expansion
Pratica correlata
Domanda del libro di testo

One cylinder in the diesel engine of a truck has an initial volume of 600 cm3. Air is admitted to the cylinder at 30°C and a pressure of 1.0 atm. The piston rod then does 400 J of work to rapidly compress the air. What are its final temperature and volume?

983
views
Domanda del libro di testo

FIGURE CP19.80 shows a thermodynamic process followed by 0.015 mol of hydrogen. How much heat energy is transferred to the gas?

1441
views
Domanda del libro di testo

In Problems 75, 76, and 77 you are given the equation used to solve a problem. For each of these, you are to write a realistic problem for which this is the correct equation.

50J=−n(8.31J/mol K)(350K)ln(13)(200×10−6m3)(13,600kg/m3)50\,\(\text{J}\)=-n(8.31\,\(\text{J/mol K}\))(350\,\(\text{K}\))\(\ln\)\(\left\)(\(\frac\)13\(\right\))(200\(\times\)10^{-6}\,\(\text{m}\)^3)(13,600\,\(\text{kg/m}\)^3)

253
views
Domanda del libro di testo

A lava flow is threatening to engulf a small town. A 400-m-wide, 35-cm-thick tongue of 1200°C lava is advancing at the rate of 1.0 m per minute. The mayor devises a plan to stop the lava in its tracks by flying in large quantities of 20°C water and dousing it. The lava has density 2500 kg/m3, specific heat 1100 J/kg K, melting temperature 800°C, and heat of fusion 4.0×105 J/kg. How many liters of water per minute, at a minimum, will be needed to save the town?

1180
views
Domanda del libro di testo

A flow-through electric water heater has a 20 kW electric heater inside an insulated 2.0-cm-diameter pipe so that water flowing through the pipe will have good thermal contact with the heater. Assume that all the heat energy is transferred to the water. Suppose the inlet water temperature is 12°C and the flow rate is 8.0 L/min (about that of a standard shower head). What is the outlet temperature?

1456
views