Skip to main content
Ch 11: Equilibrium & Elasticity
Young & Freedman Calc - University Physics 14th Edition
Young & Freedman Calc14th EditionUniversity PhysicsISBN: 9780321973610Non è quello che usi tu?Cambia libro di testo
Tutti i libri di testoYoung & Freedman Calc 14th EditionCh 11: Equilibrium & ElasticityProblema 3
Capitolo 11, Problema 3

A uniform rod is 2.00 m long and has mass 1.80 kg. A 2.40 kg clamp is attached to the rod. How far should the center of gravity of the clamp be from the left-hand end of the rod in order for the center of gravity of the composite object to be 1.20 m from the left-hand end of the rod?

Guida verificata passo dopo passo
1
Identify the system: The system consists of a uniform rod and a clamp. The rod is 2.00 m long with a mass of 1.80 kg, and the clamp has a mass of 2.40 kg.
Understand the concept of center of gravity: The center of gravity of a system is the point where the total weight of the system can be considered to act. For a uniform rod, the center of gravity is at its midpoint, which is 1.00 m from either end.
Set up the equation for the center of gravity of the composite system: The center of gravity (CG) of the system is given by the formula: \( x_{CG} = \frac{m_1 x_1 + m_2 x_2}{m_1 + m_2} \), where \( m_1 \) and \( m_2 \) are the masses of the rod and clamp, and \( x_1 \) and \( x_2 \) are their respective distances from the reference point (left-hand end of the rod).
Substitute the known values into the equation: Here, \( m_1 = 1.80 \text{ kg} \), \( x_1 = 1.00 \text{ m} \), \( m_2 = 2.40 \text{ kg} \), and \( x_{CG} = 1.20 \text{ m} \). Substitute these into the equation to find \( x_2 \), the distance of the clamp's center of gravity from the left-hand end of the rod.
Solve the equation for \( x_2 \): Rearrange the equation to solve for \( x_2 \), which will give you the required distance of the clamp's center of gravity from the left-hand end of the rod.

Risposta video verificata per un problema simile:

Questa soluzione video è stata consigliata dai nostri tutor come utile per risolvere questo problema.
Durata del video:
5m

Concetti chiave

Ecco i concetti essenziali che devi comprendere per rispondere correttamente alla domanda.

Center of Gravity

The center of gravity is the point where the total weight of a body or system is considered to be concentrated. For a uniform rod, it is located at its midpoint. When additional masses are attached, the center of gravity shifts towards the heavier mass, and its position can be calculated using the principle of moments.
Video consigliato:
Percorso guidato
14:02
Intro to Center of Mass

Principle of Moments

The principle of moments states that for a system to be in equilibrium, the sum of clockwise moments about any point must equal the sum of counterclockwise moments. This principle is used to find the new center of gravity by balancing the moments created by the rod and the attached clamp around a pivot point.
Video consigliato:
Percorso guidato
14:47
Diffraction with Huygen's Principle

Composite Object

A composite object is formed when two or more objects are combined, and its properties, such as mass and center of gravity, depend on the individual components. In this problem, the rod and clamp form a composite object, and the task is to determine the position of the clamp so that the center of gravity of the entire system is at a specified location.
Video consigliato:
Percorso guidato
07:47
Vector Composition & Decomposition
Pratica correlata
Domanda del libro di testo

A uniform 300-N trapdoor in a floor is hinged at one side. Find the net upward force needed to begin to open it and the total force exerted on the door by the hinges if the upward force is applied at the center.

2788
views
1
rank
Domanda del libro di testo

A 0.120-kg, 50.0-cm-long uniform bar has a small 0.055-kg mass glued to its left end and a small 0.110-kg mass glued to the other end. The two small masses can each be treated as point masses. You want to balance this system horizontally on a fulcrum placed just under its center of gravity. How far from the left end should the fulcrum be placed?

2841
views
Domanda del libro di testo

Two people are carrying a uniform wooden board that is 3.00 m long and weighs 160 N. If one person applies an upward force equal to 60 N at one end, at what point does the other person lift? Begin with a free-body diagram of the board.

3876
views
1
rank
Domanda del libro di testo

A uniform 300-N trapdoor in a floor is hinged at one side. Find the net upward force needed to begin to open it and the total force exerted on the door by the hinges if the upward force is applied at the center of the edge opposite the hinges.

1873
views