Skip to main content
Ch 30: Inductance
Young & Freedman Calc - University Physics 15th Edition
Young & Freedman Calc15th EditionUniversity PhysicsISBN: 9780135159552Non è quello che usi tu?Cambia libro di testo
Tutti i libri di testoYoung & Freedman Calc 15th EditionCh 30: InductanceProblema 7b
Capitolo 30, Problema 7b

At the instant when the current in an inductor is increasing at a rate of 0.0640 A/s, the magnitude of the self-induced emf is 0.0160 V. If the inductor is a solenoid with 400 turns, what is the average magnetic flux through each turn when the current is 0.720 A?

Guida verificata passo dopo passo
1
First, recall the formula for the self-induced emf in an inductor: \( \text{emf} = -L \frac{dI}{dt} \), where \( L \) is the inductance, \( \frac{dI}{dt} \) is the rate of change of current, and \( \text{emf} \) is the electromotive force.
Given that the self-induced emf is 0.0160 V and the rate of change of current is 0.0640 A/s, use the formula to solve for the inductance \( L \): \( L = \frac{\text{emf}}{\frac{dI}{dt}} \). Substitute the given values to find \( L \).
Next, use the relationship between magnetic flux \( \Phi \), inductance \( L \), and current \( I \) in a solenoid: \( L = N \frac{\Phi}{I} \), where \( N \) is the number of turns. Rearrange this formula to solve for the magnetic flux \( \Phi \): \( \Phi = \frac{L \cdot I}{N} \).
Substitute the values for \( L \) (calculated in the previous step), \( I = 0.720 \) A, and \( N = 400 \) turns into the formula to find the average magnetic flux \( \Phi \) through each turn.
Ensure all units are consistent and perform the calculation to find the average magnetic flux through each turn of the solenoid.

Risposta video verificata per un problema simile:

Questa soluzione video è stata consigliata dai nostri tutor come utile per risolvere questo problema.
Durata del video:
2m

Concetti chiave

Ecco i concetti essenziali che devi comprendere per rispondere correttamente alla domanda.

Inductance and Self-Induced EMF

Inductance is a property of an electrical conductor, such as a solenoid, that causes it to oppose changes in current. The self-induced electromotive force (emf) is generated when the current through the inductor changes, according to Faraday's law of induction. The emf is proportional to the rate of change of current and the inductance of the coil, given by the formula emf = -L * (di/dt), where L is the inductance.
Video consigliato:
Percorso guidato
07:58
Self Inductance

Magnetic Flux

Magnetic flux through a surface is the product of the magnetic field and the area it penetrates, perpendicular to the field. It is a measure of the quantity of magnetism, taking into account the strength and extent of a magnetic field. For a solenoid, the magnetic flux through each turn is given by the formula Φ = B * A, where B is the magnetic field and A is the cross-sectional area of the solenoid.
Video consigliato:
Percorso guidato
04:52
Magnetic Flux

Solenoid and Its Magnetic Field

A solenoid is a coil of wire designed to create a magnetic field when an electric current passes through it. The magnetic field inside a long solenoid is uniform and parallel to the axis of the solenoid, and its strength is given by B = μ₀ * (N/L) * I, where μ₀ is the permeability of free space, N is the number of turns, L is the length of the solenoid, and I is the current. This field is crucial for calculating the magnetic flux through each turn.
Video consigliato:
Percorso guidato
13:54
Magnetic Field Produced by Loops and Solenoids
Pratica correlata
Domanda del libro di testo

The inductor shown in Fig. E30.11 has inductance 0.260 H and carries a current in the direction shown. The current is changing at a constant rate. The potential between points a and b is Vab = 1.04 V, with point a at higher potential. Is the current increasing or decreasing?

2464
views
Domanda del libro di testo

At the instant when the current in an inductor is increasing at a rate of 0.0640 A/s, the magnitude of the self-induced emf is 0.0160 V. What is the inductance of the inductor?

2031
views
Domanda del libro di testo

Two coils have mutual inductance M = 3.25 × 10-4 H. The current i1 in the first coil increases at a uniform rate of 830 A/s. What is the magnitude of the induced emf in the second coil? Is it constant?

1706
views
Domanda del libro di testo

When the current in a toroidal solenoid is changing at a rate of 0.0260 A/s, the magnitude of the induced emf is 12.6 mV. When the current equals 1.40 A, the average flux through each turn of the solenoid is 0.00285 Wb. How many turns does the solenoid have?

2683
views
Domanda del libro di testo

Inductance of a Solenoid. A metallic laboratory spring is typically 5.00 cm long and 0.150 cm in diameter and has 50 coils. If you connect such a spring in an electric circuit, how much self-inductance must you include for it if you model it as an ideal solenoid?

2241
views
Domanda del libro di testo

A 2.50-mH toroidal solenoid has an average radius of 6.00 cm and a cross-sectional area of 2.00 cm2. How many coils does it have? (Make the same assumption as in Example 30.3.)

2544
views