Skip to main content
Ch. 23 - Electric Potential
Giancoli Douglas - Physics for Scientists and Engineers 5th edition
Giancoli Douglas5th editionPhysics for Scientists and EngineersISBN: 9780137488179당신이 사용하는 게 아니라요?교과서 변경
22장, 문제 71b

An analog voltage signal can vary from 0 V to 5.00 V, and it is to be converted to an 8-bit binary representation. What binary number would best represent 3.47 volts?

검증된 단계별 안내
1
Step 1: Understand the problem. The analog voltage signal ranges from 0 V to 5.00 V, and it is being converted to an 8-bit binary representation. An 8-bit binary number can represent 2^8 = 256 discrete levels. Each level corresponds to a specific voltage range.
Step 2: Calculate the resolution of the analog-to-digital converter (ADC). The resolution is the smallest voltage increment that can be represented by one binary step. This is given by dividing the voltage range by the number of levels: Resolution = (5.00 V - 0 V) / 256.
Step 3: Determine the binary level corresponding to 3.47 V. To do this, divide the given voltage (3.47 V) by the resolution calculated in Step 2. This gives the level number corresponding to 3.47 V.
Step 4: Round the level number to the nearest integer, as binary representation corresponds to discrete levels. This integer represents the binary level that best approximates 3.47 V.
Step 5: Convert the rounded level number into an 8-bit binary representation. Use the standard method of converting a decimal number to binary, ensuring the result is padded with leading zeros to make it 8 bits long.

비슷한 문제에 대한 검증된 영상 답변:

이 영상 해법은 위 문제에 도움이 된다고 튜터들이 추천한 것입니다.
영상 길이:
6m

주요 개념

질문에 올바르게 답하기 위해 반드시 이해해야 하는 핵심 개념들은 다음과 같습니다.

Analog to Digital Conversion

Analog to Digital Conversion (ADC) is the process of converting continuous analog signals into discrete digital numbers. In this case, the analog voltage signal ranging from 0 V to 5 V is sampled and quantized to fit into a binary format, allowing for digital representation and processing.
추천 영상:
가이드 코스
07:46
Unit Conversions

Binary Representation

Binary representation is a way of expressing numbers using only two digits: 0 and 1. In an 8-bit system, numbers can range from 0 to 255, allowing for 256 distinct values. Each bit represents a power of 2, and the combination of these bits encodes the value of the analog signal.
추천 영상:
가이드 코스
04:25
Sound Intensity Level and the Decibel Scale

Quantization

Quantization is the process of mapping a range of values to a finite set of values. In the context of ADC, it involves dividing the analog voltage range into discrete levels. For an 8-bit representation, the 5 V range is divided into 256 levels, with each level corresponding to a specific binary value, which determines how closely the digital representation approximates the original analog signal.
추천 영상:
가이드 코스
05:37
Electric Charge
관련 실천
교과서 질문

A dust particle with mass of 0.050 g and a charge of 2.0 x 10⁻⁶ C is in a region of space where the potential is given by V(x) = (2.0 V/m²) x² - (3.0 V/m³)x³. If the particle starts at x = 2.5m, what is the initial acceleration of the charge?

2155
views
교과서 질문

Two point charges are fixed 4.0 cm apart from each other. Their charges are Q₁ = Q₂ = 6.5 μC and their masses are m₁ = 2.5 mg and m₂ = 3.5 mg. If Q₁ is released from rest, what will be its speed after a very long time?

1699
views
교과서 질문

In a photocell, ultraviolet (UV) light provides enough energy to some electrons in barium metal to eject them from the surface at high speed. To measure the maximum energy of the electrons, another plate above the barium surface is kept at a negative enough potential that the emitted electrons are slowed down and stopped, and return to the barium surface. See Fig. 23–52. If the plate voltage is -3.02 V (compared to the barium) when the fastest electrons are stopped, what was the speed of these electrons when they were emitted?

1755
views
교과서 질문

Near the surface of the Earth there is an electric field of about 150 V/m which points downward. Two identical balls with mass m = 0.550 kg are dropped from a height of 2.00 m, but one of the balls is positively charged with q₁ = 650 μC, and the second is negatively charged with q₂ = -650 μC. Use conservation of energy to determine the difference in the speeds of the two balls when they hit the ground. (Neglect air resistance.)

1575
views
교과서 질문

An analog voltage signal can vary from 0 V to 5.00 V, and it is to be converted to an 8-bit binary representation. What voltage, to the nearest 0.01 V, would have a binary representation of 01110101?

70
views
교과서 질문

Calculate the electric potential due to a tiny dipole whose dipole moment is 4.8 x 10⁻³⁰ Cm at a point 4.1 x 10⁻⁹ m away if this point is 45° above the axis but nearer the positive charge.

1574
views