Skip to main content
Indietro

Chapter 3: Chemical Energetics (Thermochemistry) Study Notes

Guida di studio - Note intelligenti

Appunti personalizzati basati sui tuoi materiali, ampliati con definizioni chiave, esempi e contesto.

Chapter 3: Chemical Energetics (Thermochemistry)

Overview

This chapter introduces the fundamental concepts of thermochemistry, focusing on the study of energy changes, particularly heat, during chemical reactions. Key topics include enthalpy, calorimetry, Hess's Law, and the Born-Haber cycle.

3.1 Concept of Enthalpy

Key Terms and Definitions

  • Heat: Energy transferred between two bodies of different temperatures.

  • System: The specific part of the universe under study (e.g., the reaction mixture).

  • Surroundings: Everything outside the system.

  • Energy: The ability to do work. SI unit: Joule (J); 1 calorie (Cal) = 4.184 J.

  • Open system: Exchanges both mass and energy with surroundings.

  • Closed system: Exchanges energy but not mass with surroundings.

  • Isolated system: Exchanges neither mass nor energy with surroundings.

Thermochemistry

  • Thermochemistry is the study of heat changes in chemical reactions.

  • Two main types of chemical reactions based on energy change:

    • Exothermic reactions: Release energy to the surroundings; enthalpy change (ΔH) is negative.

    • Endothermic reactions: Absorb energy from the surroundings; ΔH is positive.

Exothermic Reactions

  • Enthalpy of products < enthalpy of reactants; ΔH < 0.

  • Energy is released to the surroundings.

  • Examples: Combustion, neutralization.

Energy Profile Diagram: Shows a decrease in enthalpy from reactants to products, with the difference representing the energy released.

Endothermic Reactions

  • Enthalpy of products > enthalpy of reactants; ΔH > 0.

  • Energy is absorbed from the surroundings.

  • Examples: Melting of ice, melting of salts.

Energy Profile Diagram: Shows an increase in enthalpy from reactants to products, with the difference representing the energy absorbed.

Enthalpy (ΔH)

  • The heat content or total energy of a system at constant pressure.

  • Cannot be measured directly; only changes in enthalpy (ΔH) are measurable during a process (e.g., combustion, ionization).

Standard Enthalpy of Reaction (ΔHo)

  • The enthalpy change for a reaction under standard conditions (298 K, 1 atm).

Thermochemical Equations

  • Show both the chemical change and the associated enthalpy change.

  • Example: H2O(s) → H2O(l)    ΔH = +6.01 kJ

  • The magnitude of ΔH is the same for the reverse reaction but with opposite sign.

Types of Enthalpies

  • Enthalpy of formation (ΔHfo)

  • Enthalpy of combustion (ΔHco)

  • Enthalpy of atomization (ΔHao)

  • Enthalpy of neutralization (ΔHno)

  • Enthalpy of hydration (ΔHhyd)

  • Enthalpy of dissolution (ΔHdiss)

  • Enthalpy of sublimation (ΔHsub)

Enthalpy of Formation (ΔHfo)

  • Heat change when 1 mole of a compound is formed from its elements in their standard states.

  • Example: H2(g) + ½ O2(g) → H2O(l)    ΔHfo = –286 kJ/mol

  • The standard enthalpy of formation of an element in its most stable form is zero.

General formula:

Enthalpy of Combustion (ΔHco)

  • Heat released when 1 mole of a substance is burned completely in excess oxygen under standard conditions.

  • Example: C(s) + O2(g) → CO2(g)    ΔHco = –393 kJ/mol

Enthalpy of Atomization (ΔHao)

  • Heat change when 1 mole of gaseous atoms is formed from an element in its standard state.

  • Always positive (bond breaking).

  • Examples:

    • Na(s) → Na(g)    ΔHa = +109 kJ/mol

    • ½ Cl2(g) → Cl(g)    ΔHa = +123 kJ/mol

Enthalpy of Neutralization (ΔHno)

  • Heat change when 1 mole of water is formed from the reaction of an acid and a base.

  • Example: HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(aq)    ΔHno = –58 kJ/mol

Enthalpy of Hydration (ΔHhyd)

  • Heat change when 1 mole of gaseous ions is hydrated in water.

  • Examples:

    • Na+(g) → Na+(aq)    ΔHhyd = –406 kJ/mol

    • Cl–(g) → Cl–(aq)    ΔHhyd = –363 kJ/mol

Enthalpy of Dissolution (ΔHdiss)

  • Heat change when 1 mole of a substance dissolves in water.

  • Example: KCl(s) → K+(aq) + Cl–(aq)    ΔHdiss = +690 kJ/mol

Enthalpy of Sublimation (ΔHsub)

  • Heat change when 1 mole of a substance sublimes (solid to gas).

  • Example: I2(s) → I2(g)    ΔHsub = +106 kJ/mol

3.2 Calorimetry

Key Terms

  • Heat capacity (C): The amount of heat required to raise the temperature of a given quantity of substance by one degree Celsius (J/°C).

  • Specific heat capacity (c): The amount of heat required to raise the temperature of one gram of a substance by one degree Celsius (J/g°C) or one Kelvin (J/g·K).

Calorimetry

  • Experimental method to measure heat changes in chemical reactions.

  • Apparatus: Calorimeter (simple or bomb type).

Simple Calorimeter (Constant-Pressure)

  • Minimizes heat loss to surroundings using insulation (e.g., Styrofoam cup).

  • Assumes all heat released by the reaction is absorbed by the solution and calorimeter.

Bomb Calorimeter (Constant-Volume)

  • Measures enthalpy changes during combustion at constant volume.

  • Reaction occurs in a sealed chamber (the bomb) surrounded by water.

  • All parts can absorb/release energy; heat loss is not negligible.

Calorimetry Equations

  • Heat released by substance = Heat absorbed by calorimeter

  • q = heat released or gained (J)

  • m = mass of substance (g)

  • c = specific heat capacity (J/g°C)

  • ΔT = temperature change (°C or K)

Principle in Calorimeter

  • Heat released by a reaction = Heat absorbed by surroundings (calorimeter + water)

  • qreaction = mcΔT or CΔT

Worked Examples

  • Example 1: Calculate the energy of combustion per mole for ethanol burned in a bomb calorimeter.

    • Given: 3.36 g ethanol, heat capacity = 2.3 kJ/°C, ΔT = 43.4°C

    • q = CΔT = 2.3 × 43.4 = 99.82 kJ

    • n = 3.36 g / 46.068 g/mol = 0.0729 mol

    • Energy per mole = –1370 kJ/mol

  • Example 2: Find the mass of water in a calorimeter after mixing copper and water at different temperatures.

    • qCu = mCucCuΔT = (0.45 g)(0.385 J/g°C)(24.8 – 87.0°C) = –10.776 J

    • qwater = mwatercwaterΔT = m(4.184 J/g°C)(24.8 – 23.0°C)

    • Set |qCu| = qwater to solve for mwater

  • Example 3: Find the specific heat of titanium using calorimetry data.

    • qwater = (75.0 g)(4.184 J/g°C)(24.3 – 21.7°C) = 815.88 J

    • qTitanium = (20.8 g)(c)(24.3 – 99.5°C) = –815.88 J

    • Solve for c: c = 0.522 J/g°C

  • Example 4: Calculate heat released in a bomb calorimeter for H2 and O2 reaction.

    • q = CΔT = (9.08 × 104 J/°C)(0.16°C) = 14.1 kJ

3.3 Hess's Law

Statement and Application

  • Hess's Law: The total enthalpy change for a reaction is the same, regardless of the number of steps or pathway taken, as long as the initial and final conditions are the same.

  • Allows calculation of enthalpy changes for reactions that cannot be measured directly.

Mathematical Expression:

  • When reversing a reaction, change the sign of ΔH.

  • When multiplying a reaction by a coefficient, multiply ΔH by the same factor.

Example Table: Standard Enthalpy of Reaction at 298 K and 1 atm

Reaction

Compound Formed

ΔH (kJ/mol)

H2(g) + ½ O2(g) → H2O(l)

Water

-286

C(s) + O2(g) → CO2(g)

Carbon dioxide

-394

H2(g) + ½ O2(g) → H2O(g)

Water (gas)

-242

2C(s) + 4H2(g) → CH4(g)

Methane

-74.8

2C(s) + 2H2(g) + Cl2(g) → C2H4Cl2(g)

Ethylene dichloride

+523

2NH3(g) + 3N2O(g) → 4N2(g) + 3H2O(l)

Nitrogen, water

-1010

Additional info: Table entries inferred from context and typical thermochemistry tables.

Worked Example: Combustion of Propane

  • Overall reaction: C3H8(g) + 5O2(g) → 3CO2(g) + 4H2O(g)

  • Use standard enthalpy values and manipulate equations so that reactants and products match the overall reaction.

  • Add the equations and their ΔH values to find the total enthalpy change.

  • Result: ΔH = –2046 kJ/mol

3.4 Born-Haber Cycle

Introduction

  • The Born-Haber cycle is a thermochemical cycle used to analyze the formation of ionic compounds from their elements.

  • It is especially useful for calculating lattice enthalpy, which cannot be measured directly.

Lattice Enthalpy (U)

  • The enthalpy change when one mole of an ionic solid is formed from its gaseous ions.

  • Calculated indirectly using the Born-Haber cycle.

Steps in the Born-Haber Cycle (Example: NaCl)

Step

Process

ΔH (kJ/mol)

1

Na(s) → Na(g)

+108

2

½ Cl2(g) → Cl(g)

+122

3

Na(g) → Na+(g) + e–

+496

4

Cl(g) + e– → Cl–(g)

–349

5

Na+(g) + Cl–(g) → NaCl(s)

U (lattice enthalpy)

6

Na(s) + ½ Cl2(g) → NaCl(s)

–411

Additional info: Table values are typical for NaCl; actual values may vary slightly.

General Born-Haber Cycle Equation

Worked Example: Magnesium Fluoride

  • Given data: ΔHf (MgF2) = –1096.5 kJ/mol, ΔHatom (Mg) = 146.4 kJ/mol, IE1 = 737 kJ/mol, IE2 = 1449 kJ/mol, ΔHatom (F) = 158.8 kJ/mol, EA (F) = –328 kJ/mol

  • Construct the cycle and solve for lattice enthalpy.

Summary Table: Types of Enthalpy Changes

Type

Definition

Example Equation

Typical ΔH (kJ/mol)

Formation

1 mol compound from elements

H2(g) + ½ O2(g) → H2O(l)

–286

Combustion

1 mol substance burned in O2

C(s) + O2(g) → CO2(g)

–393

Atomization

1 mol gaseous atoms formed

Na(s) → Na(g)

+109

Neutralization

1 mol H2O formed from acid/base

HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l)

–58

Hydration

1 mol gaseous ion hydrated

Na+(g) → Na+(aq)

–406

Dissolution

1 mol substance dissolves

KCl(s) → K+(aq) + Cl–(aq)

+690

Sublimation

1 mol solid to gas

I2(s) → I2(g)

+106

Note: All enthalpy values are under standard conditions unless otherwise specified.

Pearson Logo

Study Prep