Skip to main content
Indietro

Muscular System: Structure, Function, and Physiology

Guida di studio - Note intelligenti

Appunti personalizzati basati sui tuoi materiali, ampliati con definizioni chiave, esempi e contesto.

MUSCULAR SYSTEM

Muscle Types

The human body contains three distinct types of muscle tissue, each with unique structure and function. Understanding these types is essential for grasping how movement and force are generated.

  • Skeletal Muscle: Largest organ, comprising about 40% of body weight. Attached to bones and skin, responsible for voluntary movements. Governed by the somatic nervous system. Striated appearance due to actin and myosin arrangement. Example: Sartorius muscle, the longest muscle in the body.

  • Cardiac Muscle: Found only in the heart, forms the bulk of heart walls. Striated, but contractions are involuntary and regulated by the heart's pacemaker and the autonomic nervous system. Nervous system can modulate contraction rate.

  • Smooth Muscle: Located in walls of hollow organs (e.g., stomach, urinary bladder, airways). Not striated. Involuntary contractions regulated by the autonomic nervous system and pacesetter cells. Can contract without direct nervous stimulation.

Muscle Tissue Characteristics

All muscle tissues share four fundamental properties that enable their function:

  • Excitability (Responsiveness): Ability to receive and respond to stimuli.

  • Contractility: Ability to shorten forcibly when stimulated.

  • Extensibility: Ability to be stretched.

  • Elasticity: Ability to recoil to resting length after stretching.

Muscle Functions

Muscles perform several vital functions in the body:

  • Produce Movement: Responsible for locomotion and manipulation (e.g., walking, digesting, pumping blood).

  • Maintain Posture and Body Position: Stabilize the body during activity and rest.

  • Stabilize Joints: Reinforce and support joints.

  • Generate Heat: Contraction produces heat, helping maintain body temperature.

SKELETAL MUSCLE

Skeletal Muscle Anatomy

Skeletal muscle is a complex organ composed of multiple tissue types and features:

  • Nerve and Blood Supply: Each muscle receives a nerve, artery, and veins. Nerves control every muscle fiber; muscles require substantial oxygen and nutrients, and waste removal.

  • Connective Tissue Sheaths: Support and reinforce muscle structure. Three layers:

    • Epimysium: Surrounds entire muscle; dense irregular connective tissue.

    • Perimysium: Surrounds fascicles (bundles of muscle fibers); fibrous connective tissue.

    • Endomysium: Surrounds individual muscle fibers; fine areolar connective tissue.

  • Attachments: Muscles attach to bones at two points:

    • Origin: Attachment to immovable or less movable bone.

    • Insertion: Attachment to movable bone.

    • Direct Attachment: Epimysium fused to periosteum or perichondrium.

    • Indirect Attachment: Connective tissue extends as tendon or aponeurosis.

Muscle Fiber Microanatomy

Skeletal muscle fibers are specialized cells with unique structures:

  • Fiber: Muscle cell; long, cylindrical, multinucleated.

  • Sarcolemma: Plasma membrane of muscle fiber.

  • Sarcoplasm: Cytoplasm; contains glycogen and myoglobin (oxygen storage).

  • Myofibrils: Rod-like structures responsible for contraction; densely packed, account for ~80% of cell volume.

  • Sarcoplasmic Reticulum (SR): Modified smooth endoplasmic reticulum; stores and releases calcium ions (Ca2+).

  • T Tubules: Extensions of sarcolemma; transmit electrical signals deep into fiber.

Myofibril Features

  • Striations: Alternating dark (A bands) and light (I bands) regions.

  • Sarcomeres: Smallest contractile unit; area between Z discs.

  • Myofilaments: Actin (thin) and myosin (thick) filaments arranged in sarcomeres.

Myofilament Composition

  • Myosin: Thick filament; has actin-binding sites, forms cross bridges during contraction.

  • Actin: Thin filament; contains G actin subunits with myosin-binding sites, forms F actin helix.

  • Regulatory Proteins: Tropomyosin and Troponin regulate access to binding sites.

Sarcoplasmic Reticulum and T Tubules

  • SR: Surrounds myofibrils, regulates Ca2+ levels.

  • T Tubules: Allow electrical signals to reach deep muscle fibers.

Muscle Anatomy Hierarchy

  • Whole muscle (epimysium)

  • Fascicle (perimysium)

  • Muscle fiber (endomysium)

  • Myofibrils

  • Sarcomeres

  • Myofilaments (actin and myosin)

Sliding Filament Model of Contraction

This model explains how muscles contract at the molecular level:

  • Thin filaments (actin) slide past thick filaments (myosin), increasing overlap.

  • Myosin heads bind to actin, forming cross bridges, and pull actin toward the center (M line).

  • Filaments do not change length; sarcomere shortens.

  • Key changes: Z discs move closer, I bands shorten, H zones disappear, A bands move closer.

Muscle Fiber Contraction: Membrane Potential and Action Potential

Muscle contraction is initiated by changes in membrane potential:

  • Resting Membrane Potential: Voltage across sarcolemma due to ion separation (Na+, K+, Cl-).

  • Action Potential: Rapid change in membrane voltage, propagated along sarcolemma.

  • Excitable Cells: Neurons and muscle fibers capable of action potentials.

  • Neurotransmitter: Acetylcholine (ACh) transmits signal from neuron to muscle.

Ion Channels

  • Chemically Gated: Opened by neurotransmitters (e.g., ACh).

  • Voltage-Gated: Opened by changes in membrane potential.

Neuromuscular Junction (NMJ)

The NMJ is the site where motor neurons stimulate muscle fibers:

  • Axon terminals release ACh into synaptic cleft.

  • ACh binds to receptors on sarcolemma, opening Na+ channels.

  • Junctional folds increase surface area for ACh receptors.

Steps of Muscle Contraction

  • AP arrives at axon terminal.

  • Ca2+ enters neuron, triggering ACh release.

  • ACh binds to sarcolemma receptors, opening Na+ gates.

  • Na+ influx causes end plate potential.

  • AP propagates across sarcolemma and down T tubules.

  • Ca2+ released from SR, binds to troponin, exposing myosin binding sites.

  • Cross bridge cycle initiates contraction.

Generation of Action Potential Across Sarcolemma

  • End Plate Potential: Local depolarization due to Na+ influx.

  • Depolarization: If threshold reached, voltage-gated Na+ channels open, AP generated.

  • Repolarization: Na+ channels close, K+ channels open, restoring resting potential.

  • Refractory Period: Fiber cannot be stimulated until repolarization completes.

  • Na+-K+ Pump: Restores ionic balance.

Excitation-Contraction Coupling

Links electrical excitation to mechanical contraction:

  • AP travels along sarcolemma and T tubules.

  • Voltage-sensitive proteins trigger Ca2+ release from SR.

  • Ca2+ binds to troponin, shifting tropomyosin and exposing actin sites.

  • Myosin binds to actin, initiating contraction.

  • When stimulation ceases, Ca2+ pumped back into SR, ending contraction.

Cross Bridge Cycling

The cross bridge cycle is the fundamental process of muscle contraction:

  1. Cross Bridge Formation: Myosin head binds to actin.

  2. Power Stroke: Myosin head pivots, pulling actin toward M line.

  3. Detachment: ATP binds to myosin, causing detachment from actin.

  4. Cocking: ATP hydrolysis re-energizes myosin head for next cycle.

Cycle repeats as long as Ca2+ and ATP are available.

Clinical Application: Rigor Mortis

  • After death, ATP production ceases; Ca2+ accumulates, cross bridges form but cannot detach.

  • Muscles remain contracted until proteins degrade.

WHOLE MUSCLE CONTRACTION

Types of Contraction

  • Isometric: Tension increases, muscle does not shorten.

  • Isotonic: Muscle shortens, tension exceeds load.

Motor Units

  • Motor unit: Motor neuron and all muscle fibers it innervates.

  • Smaller motor units allow finer control.

  • Fibers from a motor unit are distributed throughout muscle.

Muscle Twitch

  • Response to a single AP.

  • Three phases:

    • Latent Period: Excitation-contraction coupling; no tension.

    • Contraction: Cross bridge formation; tension increases.

    • Relaxation: Ca2+ reentry into SR; tension declines.

All-or-None Principle

  • Individual muscle fibers contract fully when stimulated; no partial contractions.

  • Whole muscles can have graded contractions based on motor unit recruitment.

Graded Muscle Responses

  • Strength and smoothness of contraction depend on:

    • Frequency of Stimulation: Higher frequency leads to summation and tetanus.

    • Strength of Stimulation: Recruitment of more motor units increases force.

  • Types of stimulus:

    • Sub-threshold: No contraction.

    • Threshold: First observable contraction.

    • Maximal: All motor units recruited.

  • Size principle: Small motor units recruited first, larger units for stronger contractions.

Muscle Tone

  • Constant, slight contraction due to spinal reflexes.

  • Keeps muscles firm and ready to respond.

Energy for Contraction

ATP is essential for muscle contraction and must be regenerated rapidly:

  • Direct Phosphorylation: Creatine phosphate donates phosphate to ADP to form ATP.

    • Equation:

  • Anaerobic Pathway: Glycolysis and lactic acid formation; does not require oxygen.

    • Equation:

  • Aerobic Respiration: Occurs in mitochondria, requires oxygen; produces most ATP during rest and moderate exercise.

Muscle Fatigue

  • Inability to contract despite stimulation.

  • Usually due to ionic imbalances (K+, Ca2+, Pi).

  • ATP depletion is rare except in extreme cases.

  • Recovery requires replenishing oxygen, glycogen, and ATP stores.

Factors Affecting Muscle Contraction

  • Number of Fibers Stimulated: More motor units recruited, greater force.

  • Size of Fibers: Larger fibers generate more tension; hypertrophy increases size.

  • Frequency of Stimulation: Higher frequency increases force.

  • Degree of Stretch: Optimal sarcomere length (80–120% resting) maximizes force.

Velocity and Duration of Contraction

  • Influenced by:

    • Muscle Fiber Type: Classified by contraction speed and ATP synthesis pathway.

    • Load: Muscles contract fastest with minimal load.

    • Recruitment: More motor units, faster and longer contraction.

Muscle Fiber Types

Type

ATP Synthesis

Fatigue Resistance

Function

Slow Oxidative

Aerobic

High

Endurance, posture

Fast Oxidative

Aerobic

Medium

Sprinting, walking

Fast Glycolytic

Anaerobic

Low

Short-term, powerful moves

Example: Marathon runners have more slow oxidative fibers, while sprinters have more fast glycolytic fibers.

Additional info: Muscle fiber type distribution is largely determined by genetics, but can be modified by training.

Pearson Logo

Study Prep