Skip to main content
Indietro

Respiratory System: Mechanics, Gas Exchange, and Pathology

Guida di studio - Note intelligenti

Appunti personalizzati basati sui tuoi materiali, ampliati con definizioni chiave, esempi e contesto.

Types of Hypoxia

Overview of Hypoxia

Hypoxia refers to a deficiency in the amount of oxygen reaching the tissues. There are several types, each with distinct causes and physiological implications.

  • Hypoxic Hypoxia: Caused by low environmental oxygen (e.g., high altitude, hypoventilation). Results in low arterial PO2.

  • Anemic Hypoxia: Due to problems with oxygen delivery by the blood (e.g., anemia, low hemoglobin, carbon monoxide poisoning).

  • Ischemic Hypoxia: Caused by reduced blood flow (ischemia) to tissues (e.g., heart attack, shock, thrombosis).

  • Histotoxic Hypoxia: Occurs when cells cannot utilize oxygen, often due to poisoning (e.g., cyanide poisoning interfering with the electron transport chain).

Comparison Table of Hypoxia Types:

Type

Primary Cause

Key Feature

Example

Hypoxic

Low environmental O2

Low arterial PO2

High altitude

Anemic

Blood's O2 carrying capacity reduced

Low hemoglobin or RBCs

Anemia, CO poisoning

Ischemic

Reduced blood flow

Normal O2 content, poor delivery

Thrombosis, shock

Histotoxic

Cellular utilization impaired

Cells can't use O2

Cyanide poisoning

Mechanics of Breathing

Pressure and Volume Relationships

Breathing is driven by changes in thoracic volume, which alter pressures in the lungs and pleural cavity, facilitating inspiration and expiration.

  • Boyle's Law: The pressure of a gas is inversely proportional to its volume at constant temperature.

Equation:

  • Increasing lung volume (inspiration) decreases alveolar pressure, drawing air in.

  • Decreasing lung volume (expiration) increases alveolar pressure, pushing air out.

Pleural Cavity and Lung Inflation

  • The pleural cavity surrounds the lungs and maintains a lower pressure than the lungs themselves, acting as a vacuum to keep the lungs inflated.

  • Intrapleural pressure is typically about 4 mmHg less than alveolar pressure (e.g., 756 mmHg vs. 760 mmHg).

  • Pneumothorax occurs when the pleural cavity is breached, eliminating the pressure difference and causing lung collapse.

Muscles of Respiration

  • Inspiration: Primarily the diaphragm (contracts and moves down), assisted by external intercostals for deeper breaths.

  • Expiration: Normally passive (diaphragm relaxes). Forced expiration uses internal intercostals and rectus abdominis.

Pressure Changes During Breathing

  • During inspiration, alveolar pressure drops below atmospheric, air flows in, then equalizes at the end of inspiration.

  • During expiration, alveolar pressure rises above atmospheric, air flows out, then equalizes at the end of expiration.

  • Intrapleural pressure remains lower than alveolar pressure throughout the cycle, fluctuating with breathing.

Typical Values:

Phase

Alveolar Pressure (mmHg)

Intrapleural Pressure (mmHg)

End Inspiration

760

754

End Expiration

760

757

Lung Structure and Compliance

Alveoli and Gas Exchange

  • Alveoli are the primary sites of gas exchange, highly vascularized and lined by a thin barrier (one endothelial cell and one alveolar cell layer).

  • Elastic fibers in alveolar walls allow expansion and recoil, essential for tidal breathing.

Lung Compliance and Elasticity

  • Compliance: The ease with which lungs expand. High compliance means lungs are soft and easy to inflate; low compliance (stiff lungs) impairs breathing (e.g., emphysema, black lung).

  • Elasticity: The ability of lungs to recoil after expansion, necessary for effective expiration.

Surface Tension and Surfactant

  • Water lining the alveoli creates surface tension, tending to collapse alveoli, especially smaller ones.

  • Law of Laplace: The inward pressure in a sphere (alveolus) is given by:

  • T = surface tension, r = radius of alveolus.

  • Smaller alveoli have higher inward pressure and are more prone to collapse.

  • Surfactant (produced by type II alveolar cells) reduces surface tension, especially in smaller alveoli, preventing collapse and equalizing pressures.

  • Main surfactant: dipalmitoyl phosphatidylcholine.

Clinical Note: Infant respiratory distress syndrome results from insufficient surfactant production in newborns, leading to alveolar collapse and impaired gas exchange.

Gas Exchange and Partial Pressures

Dalton's Law of Partial Pressures

  • The total pressure of a gas mixture equals the sum of the partial pressures of individual gases.

  • At sea level, atmospheric pressure is 760 mmHg: ~78% N2 (593 mmHg), ~21% O2 (160 mmHg), ~0.04% CO2 (0.3 mmHg).

  • Gas exchange depends on partial pressure gradients (e.g., O2 diffuses from high to low PO2).

Alveolar and Blood Gas Pressures

  • Alveolar PO2 ≈ 100 mmHg (lower than atmospheric due to mixing with dead space air).

  • Venous blood PO2 ≈ 40 mmHg, creating a strong gradient for O2 uptake.

  • Alveolar PCO2 ≈ 40 mmHg; venous blood PCO2 ≈ 46 mmHg, favoring CO2 removal.

Anatomical Dead Space and Alveolar Ventilation

Dead Space

  • Anatomical dead space: Air in the conducting airways (trachea, bronchi, bronchioles) that does not participate in gas exchange (~150 mL).

  • During each breath, some fresh air remains in dead space and does not reach alveoli; some stale air remains in dead space and is the first to enter alveoli on the next inspiration.

Alveolar Ventilation Equation:

For example:

Spirometry and Lung Volumes

Lung Volumes and Capacities

  • Tidal Volume (TV): Volume of air moved in and out during normal breathing (~500 mL).

  • Inspiratory Capacity (IC): Maximum volume inhaled after normal expiration.

  • Expiratory Capacity (EC): Maximum volume exhaled after normal inspiration.

  • Vital Capacity (VC): Maximum volume of air that can be exhaled after maximal inhalation.

  • Residual Volume (RV): Air remaining in lungs after maximal exhalation (cannot be voluntarily expelled).

  • Total Lung Capacity (TLC): Sum of all lung volumes (VC + RV).

Spirometry

  • Spirometry measures lung volumes and capacities, useful for diagnosing respiratory disorders.

  • Normal tidal breathing is about 500 mL per breath.

Respiratory Pathologies

Obstructive Pulmonary Pathology

  • Obstructive diseases (e.g., asthma, bronchitis, COPD) involve airway narrowing or blockage, making expiration more difficult than inspiration.

  • During expiration, airway diameter decreases, and obstructions have a proportionally greater effect, increasing residual volume and reducing expiratory capacity.

Obstructive vs. Normal Spirometry:

Parameter

Normal

Obstructive Disease

Inspiratory Capacity

Normal

Reduced

Expiratory Capacity

Normal

Reduced

Residual Volume

Normal

Increased

Total Lung Capacity

Normal

Unchanged

  • Obstructive pathologies are characterized by difficulty exhaling, leading to air trapping and increased residual volume.

Restrictive Pulmonary Pathology

  • Restrictive diseases (not detailed here) primarily affect inspiration, reducing lung expansion and total lung capacity.

  • Examples include pulmonary fibrosis and conditions causing stiff lungs.

Summary of Key Concepts

  • Pleural cavity vacuum keeps lungs inflated.

  • Thoracic volume changes drive inspiration and expiration via pressure gradients (Boyle's Law).

  • Lung compliance and elasticity are determined by alveolar structure and surface tension.

  • Surfactant lowers surface tension, preventing alveolar collapse, especially in small alveoli.

  • Anatomical dead space reduces the proportion of fresh air reaching alveoli.

  • Spirometry assesses lung function and distinguishes between obstructive and restrictive pathologies.

Additional info: Some explanations (e.g., Law of Laplace, surfactant chemistry, and clinical notes on infant respiratory distress syndrome) were expanded for academic completeness.

Pearson Logo

Study Prep