Skip to main content
Indietro

Chemical Equilibrium: Principles, Calculations, and Applications. Ch 15

Guida di studio - Note intelligenti

Appunti personalizzati basati sui tuoi materiali, ampliati con definizioni chiave, esempi e contesto.

Chapter 15: Chemical Equilibrium

Introduction to Chemical Equilibrium

Chemical equilibrium is a fundamental concept in chemistry describing the state in which the rates of the forward and reverse reactions are equal, resulting in constant concentrations of reactants and products. This chapter explores the principles, calculations, and real-world implications of chemical equilibrium, including the effects of concentration, temperature, and catalysts.

Dynamic Equilibrium

  • Dynamic Equilibrium: Occurs when the rate of the forward reaction equals the rate of the reverse reaction. Both reactions continue to occur, but there is no net change in the concentrations of reactants and products.

  • Analogy: Like traffic moving in opposite directions at the same rate on a freeway, or weights balanced on a scale.

  • Key Point: At equilibrium, concentrations are constant but not necessarily equal.

  • Example: N2O4 ↔ 2NO2 — both forward and reverse reactions occur at the same rate.

Rates of Chemical Reactions

  • Reaction Rate: The speed at which reactants are converted to products, measured as the change in concentration over time.

  • Fast vs. Slow Reactions: Fast reactions convert a large amount of reactant quickly; slow reactions convert only a small amount over the same period.

  • Controlling Reaction Rates: Essential in practical applications (e.g., safe rocket launches).

Collision Theory

  • Collision Theory: Chemical reactions occur when molecules or atoms collide with sufficient energy.

  • Activation Energy (Ea): The minimum energy required for a reaction to occur.

  • Factors Affecting Rate:

    • Concentration: Higher concentration increases collision frequency.

    • Temperature: Higher temperature increases kinetic energy and collision energy.

  • Example: H2(g) + I2(g) → 2HI(g) — requires sufficient energy to break H–H and I–I bonds.

Effect of Concentration and Temperature

  • Concentration: Higher initial concentrations lead to faster initial rates.

  • Temperature: Higher temperatures result in faster reaction rates due to increased molecular motion.

  • General Principle: Reaction rate increases with both concentration and temperature, but decreases as reactants are consumed.

The Equilibrium Constant (Keq)

The equilibrium constant quantifies the ratio of product and reactant concentrations at equilibrium for a given reaction.

  • General Expression: For a reaction :

  • Interpretation:

    • Keq >> 1: Products favored at equilibrium.

    • Keq << 1: Reactants favored at equilibrium.

    • Keq ≈ 1: Significant amounts of both reactants and products.

  • Example: For 2N2O5(g) ↔ 4NO2(g) + O2(g):

Equilibrium Expressions for Solids and Liquids

  • Rule: Pure solids and liquids are omitted from equilibrium expressions because their concentrations are constant.

  • Example: For CaCO3(s) ↔ CaO(s) + CO2(g):

  • Only the gaseous product is included.

Calculating and Using Equilibrium Constants

  • Calculation: Use measured equilibrium concentrations in the Keq expression.

  • Example: For H2(g) + I2(g) ↔ 2HI(g) with [H2] = 0.11 M, [I2] = 0.11 M, [HI] = 0.78 M:

  • Finding Unknown Concentrations: Rearrange the Keq expression to solve for the unknown.

  • Example: For 2COF2(g) ↔ CO2(g) + CF4(g) with Keq = 2.00, [COF2] = 0.255 M, [CF4] = 0.118 M, solve for [CO2]:

Le Châtelier’s Principle

Le Châtelier’s principle predicts how a system at equilibrium responds to disturbances.

  • Concentration Changes:

    • Adding reactants shifts equilibrium toward products (right).

    • Adding products shifts equilibrium toward reactants (left).

    • Removing products shifts equilibrium toward products (right).

  • Volume Changes (for gases):

    • Decreasing volume (increasing pressure) shifts equilibrium toward the side with fewer moles of gas.

    • Increasing volume (decreasing pressure) shifts equilibrium toward the side with more moles of gas.

    • If moles of gas are equal on both sides, volume change has no effect.

  • Temperature Changes:

    • Exothermic Reactions (ΔH < 0): Increasing temperature shifts equilibrium left (toward reactants); decreasing temperature shifts right (toward products).

    • Endothermic Reactions (ΔH > 0): Increasing temperature shifts equilibrium right (toward products); decreasing temperature shifts left (toward reactants).

  • Example Table: Effects of Disturbances on Equilibrium

Disturbance

Shift Direction

Reason

Add Reactant

Right (products)

System consumes added reactant

Add Product

Left (reactants)

System consumes added product

Remove Product

Right (products)

System replaces removed product

Decrease Volume

Toward fewer moles of gas

Reduces pressure

Increase Volume

Toward more moles of gas

Increases pressure

Increase Temperature (Exothermic)

Left (reactants)

Heat is a product

Increase Temperature (Endothermic)

Right (products)

Heat is a reactant

Solubility-Product Constant (Ksp)

  • Ksp: The equilibrium constant for the dissolution of a sparingly soluble ionic compound.

  • General Form: For AB(s) ↔ A+(aq) + B-(aq):

  • Omit solids: Only include aqueous ions in the expression.

  • Interpreting Ksp: Larger Ksp means higher solubility.

Selected Ksp Values

Compound

Ksp

BaSO4

1.07×10−10

CaSO4

7.10×10−5

AgCl

1.77×10−10

AgI

8.51×10−17

PbCl2

1.17×10−5

CuS

1.27×10−36

MgCO3

6.82×10−6

Calculating Molar Solubility from Ksp

  • Molar Solubility (S): The number of moles of solute that dissolve per liter of solution.

  • Example: For AgCl(s) ↔ Ag+(aq) + Cl-(aq),

  • For BaSO4:

Reaction Pathways and Catalysts

  • Activation Energy (Ea): The energy barrier that must be overcome for a reaction to proceed.

  • Effect on Rate: Higher activation energy means a slower reaction rate.

  • Catalysts: Substances that lower the activation energy, increasing the reaction rate without being consumed.

  • Equilibrium Position: Catalysts do not change the equilibrium constant or the position of equilibrium; they only help the system reach equilibrium faster.

  • Example: Catalytic converters in cars use catalysts to convert CO to CO2.

Enzymes: Biological Catalysts

  • Enzymes: Highly specific biological catalysts that accelerate biochemical reactions by lowering activation energy.

  • Example: Sucrase catalyzes the breakdown of sucrose into glucose and fructose.

  • Specificity: Each enzyme catalyzes only a particular reaction, allowing precise control in living organisms.

Summary Table: Key Equilibrium Concepts

Concept

Definition/Key Point

Dynamic Equilibrium

Forward and reverse reaction rates are equal; concentrations constant

Equilibrium Constant (Keq)

Ratio of product to reactant concentrations at equilibrium

Le Châtelier’s Principle

System shifts to minimize disturbances

Ksp

Equilibrium constant for solubility of ionic compounds

Activation Energy

Energy barrier for reaction progress

Catalyst

Lowers activation energy, increases rate, does not affect equilibrium position

Applications and Biological Relevance

  • Oxygen Transport: Hemoglobin binds oxygen in the lungs (high O2), releases it in tissues (low O2), governed by equilibrium constants.

  • Fetal Hemoglobin: Has a higher equilibrium constant for O2 binding, allowing efficient oxygen transfer from mother to fetus.

  • Enzyme Regulation: Living organisms control metabolic pathways by regulating enzyme activity, thus controlling reaction rates and maintaining controlled disequilibrium.

Key Equations

  • Equilibrium Constant:

  • Solubility Product: (for )

  • Ideal Gas Law (for volume/pressure changes):

Conclusion

Chemical equilibrium is central to understanding chemical reactions, their rates, and how they respond to changes in conditions. Mastery of equilibrium concepts enables chemists to predict, control, and optimize chemical processes in both laboratory and real-world settings.

Pearson Logo

Study Prep