Skip to main content
Indietro

Control of Microbial Growth: Methods, Agents, and Laboratory Safety

Guida di studio - Note intelligenti

Appunti personalizzati basati sui tuoi materiali, ampliati con definizioni chiave, esempi e contesto.

Control of Microbial Growth

Biosafety Levels (BSL)

Laboratories are classified into four biosafety levels based on the organisms handled and the risk they pose to humans and the environment.

  • BSL-1: Microbes not known to cause disease in healthy hosts; minimal risk. Standard microbiological practices are sufficient.

  • BSL-2: (e.g., Normandale lab) Indigenous microbes associated with diseases of varying severity; moderate risk. Requires additional precautions such as limited access and use of personal protective equipment (PPE).

  • BSL-3: Indigenous or exotic microbes causing serious or potentially lethal diseases via respiratory transmission. Requires controlled access, specialized ventilation, and PPE.

  • BSL-4: Dangerous and exotic microbes with high risk of aerosol-transmitted infections, often fatal without treatment or vaccines. Requires maximum containment and specialized facilities.

Example: Most teaching labs, including Normandale, operate at BSL-2.

Definitions of Key Terms in Microbial Control

  • Sterilization: Complete elimination of all forms of microbial life, including vegetative cells, endospores, and viruses, from an inanimate object. Methods include autoclaving, chemicals, and radiation.

  • Aseptic Technique: Procedures used to prevent contamination of sterile environments or cultures by unwanted microbes.

  • Disinfection: Reduction or destruction of microbial load on inanimate objects using heat or antimicrobial chemicals (e.g., bleach, phenols).

  • Antisepsis: Reduction of microbial load on living tissue using antimicrobial chemicals (e.g., isopropyl alcohol, iodine).

  • Degerming: Removal of microbes from living tissue by mechanical means (e.g., handwashing with soap or alcohol swabs).

  • Sanitizing: Reduction of microbial load on inanimate objects to safe public health levels (e.g., commercial dishwashing).

Cidal vs. Static Agents and Prefixes

  • Cidal Agents: Cause irreversible cell death. Microbes do not recover after removal of the agent (e.g., bactericidal, virucidal, fungicidal).

  • Static Agents: Inhibit growth and reproduction without killing. Microbes may resume growth if the agent is removed (e.g., bacteriostatic, fungistatic).

  • Prefixes:

    • Bacteri-: Refers to bacteria (e.g., bactericide kills bacteria).

    • Viri-: Refers to viruses (e.g., virucidal inactivates viruses).

    • Fungi-: Refers to fungi (e.g., fungistatic inhibits fungal growth).

Microbial Death Curve

A microbial death curve is a graphical representation showing the rate at which a microbial population is killed when exposed to a control agent (e.g., heat, chemicals). The death rate is typically constant over time, meaning the same percentage of remaining microbes is killed in each time interval.

  • D-value: The time required to kill 90% of the microbial population under specific conditions.

Application: Used to determine the time needed for sterilization processes.

Methods of Microbial Control

Physical Methods

  • Heat

    • Dry Heat:

      • Incineration: Sterilizes by burning; destroys all microbes, including endospores and prions. Used for inoculating loops.

      • Oven: Sterilizes by denaturing proteins and dehydrating cells; effective against vegetative cells, fungi, viruses, and endospores.

    • Moist Heat:

      • Autoclave: Sterilizes by denaturing proteins and altering membranes; kills all vegetative cells and most endospores (extended time for prions).

      • Boiling: Disinfects by denaturing proteins; kills most vegetative cells (not endospores).

      • Pasteurization: Disinfects by denaturing proteins; kills some pathogens (e.g., Salmonella, E. coli), prevents food spoilage.

      • Ultra-High Temperature (UHT): Sterilizes; kills all vegetative cells and endospores, used for shelf-stable foods.

    • Lack of Heat:

      • Refrigeration (0–7°C): Inhibits metabolism, slows cell division.

      • Freezing (< -2°C): Stops metabolism, may kill some microbes.

  • Pressure (Pascalization): Disinfects by denaturing proteins and causing cell lysis; used in food preservation.

  • Desiccation and Lyophilization:

    • Desiccation: Drying inhibits metabolism; used for dried fruits and meats.

    • Lyophilization: Rapid freezing under vacuum; preserves food and lab cultures.

  • Radiation:

    • Ionizing Radiation: Sterilizes by introducing double-strand breaks in DNA (e.g., X-rays, gamma rays); used for spices, heat-sensitive items.

    • Non-ionizing Radiation: Disinfects using UV light; causes thymine dimers in DNA, effective on surfaces.

  • Filtration:

    • HEPA Filters: Disinfect air by trapping microbes; used in operating rooms and safety cabinets.

    • Membrane Filters: Sterilize liquids by removing bacteria, fungi, and endospores (some viruses may pass).

Chemical Methods

  • Phenolics: Disinfectants and antiseptics that disrupt cell membranes (e.g., triclosan).

  • Heavy Metals: Topical antiseptics that bind proteins and inhibit enzymes (e.g., mercury, silver).

  • Halogens: Antiseptics and disinfectants that oxidize and destabilize cellular macromolecules (e.g., iodine, chlorine).

  • Alcohols: Antiseptics and disinfectants that denature proteins and disrupt membranes (e.g., ethanol, isopropanol).

  • Surfactants: Degerming agents and disinfectants that lower surface tension and disrupt membranes (e.g., quaternary ammonium compounds).

  • Bisbiguanides: Antiseptics that disturb cell membranes; used for surgical hand scrubs (e.g., chlorhexidine).

  • Alkylating Agents:

    • Ethylene Oxide: Sterilizing gas that penetrates plastics and fabrics; advantages include sterilizing heat-sensitive items; disadvantages include being explosive and carcinogenic.

  • Peroxygens: Antiseptics and disinfectants that produce free radicals (e.g., hydrogen peroxide, peracetic acid).

  • Supercritical Fluids: Sterilize by penetrating cells and forming carbonic acid, lowering intracellular pH (e.g., carbon dioxide); used for delicate tissues, food, and medical devices.

  • Food Preservation Methods: Decrease pH and inhibit enzymes (e.g., sorbic acid, nitrates).

Levels of Germicides

Level

Effectiveness

Targets

High-level

Kills all microbes, including endospores (sterilization with sufficient contact time)

Vegetative cells, fungi, viruses, endospores

Intermediate-level

Kills most microbes, not endospores

Vegetative cells, most viruses

Low-level

Kills only some microbes

Certain vegetative bacteria, fungi, enveloped viruses

Disk-Diffusion Assay

This assay tests the effectiveness of chemicals against bacteria. Paper disks soaked in chemicals are placed on a bacterial lawn. The chemical diffuses, and a clear zone of inhibition forms if bacteria are killed or growth is prevented. The size of the zone indicates the chemical's effectiveness.

In-Use Test

A positive in-use test means microbes are growing in the disinfectant solution, indicating contamination and loss of effectiveness.

Additional info: The D-value is mathematically expressed as the time required to reduce the microbial population by one log (90%) under specific conditions: , where is the initial population and is the final population.

Pearson Logo

Study Prep