IndietroChapter 9 Notes
Guida di studio - Note intelligenti
Appunti personalizzati basati sui tuoi materiali, ampliati con definizioni chiave, esempi e contesto.
Controlling Microbial Growth in the Environment
Terminology of Microbial Control
Understanding the terminology is essential for distinguishing between various methods and levels of microbial control. These terms describe the processes and outcomes of efforts to reduce or eliminate microorganisms in different settings.
Antisepsis: Reduction in the number of microorganisms, viruses, and pathogens on living tissues.
Aseptic: An environment or procedure free of pathogenic contaminants.
-cide / -cidal: Suffixes indicating destruction of a type of microbe (e.g., bactericide, virucidal).
Degerming: Removal of microbes by mechanical means (e.g., handwashing).
Disinfection: Destruction of most microorganisms and viruses on nonliving tissue.
Pasteurization: Use of heat to destroy pathogens and reduce the number of spoilage microorganisms in foods and beverages.
Sanitization: Removal of pathogenic microbes from objects to meet public health standards.
-stasis / -static: Suffixes indicating inhibition but not complete destruction of a type of microbe (e.g., bacteriostatic).
Sterilization: Destruction of all microorganisms and viruses in or on an object.
Basic Principles of Microbial Control
Microbial control relies on understanding how agents affect microbial structures and functions, leading to death or inhibition.
Microbial death: Permanent loss of reproductive ability under ideal environmental conditions.
Microbial death rate: Often constant for a microorganism under a particular set of conditions.
Alteration of cell walls and membranes: Damage can cause cells to burst due to osmotic effects; cytoplasmic membrane controls passage of chemicals.
Damage to proteins and nucleic acids: Protein function depends on 3-D shape; extreme heat, chemicals, and radiation can denature proteins or nucleic acids, produce fatal mutants, and interfere with protein synthesis.
Nonenveloped viruses: Greater tolerance of harsh conditions compared to enveloped viruses.
Selection of Microbial Control Methods
Choosing an appropriate method depends on the site, susceptibility of microorganisms, environmental conditions, and biosafety levels.
Agents: Should be inexpensive, fast-acting, stable in storage, and harmless to humans, animals, and objects.
Site to be treated: Harsh chemicals and extreme heat cannot be used on humans, animals, or fragile objects; method depends on the site of medical procedure.
Susceptibility of microorganisms:
High-level germicides: Kill all pathogens including endospores.
Intermediate-level germicides: Kill fungal spores, protozoan cysts, viruses, and pathogenic bacteria.
Low-level germicides: Kill vegetative bacteria, fungi, protozoa, and some viruses.
Environmental conditions: Temperature and pH affect microbial death rates and efficacy; organic materials can interfere with penetration of heat, chemicals, and radiation.
Biosafety levels:
Biosafety Level 1: Pathogens that do not cause disease in healthy humans.
Biosafety Level 2: Moderately hazardous agents.
Biosafety Level 3: Microbes handled in safety cabinets.
Biosafety Level 4: Microbes that cause severe or fatal disease.
Physical Methods of Microbial Control
Physical methods utilize heat, cold, drying, osmotic pressure, and radiation to control microbial growth.
High temperatures: Denature proteins, disrupt cell membranes and walls, and affect nucleic acids.
Thermal death point: Lowest temperature that kills all cells in broth in 10 minutes.
Thermal death time: Time to sterilize a volume of liquid at a set temperature.
Moist heat: Used to disinfect, sanitize, sterilize, and pasteurize; denatures proteins and destroys membranes; more effective than dry heat.
Boiling: Kills vegetative cells of bacteria and fungi, protozoan trophozoites, and most viruses; boiling time is critical; endospores, protozoan cysts, and some viruses can survive.
Autoclaving: Pressure applied to boiling water increases boiling temperature; standard conditions: 121°C, 15 psi, 15 minutes.
Pasteurization: Used for milk, ice cream, yogurt, and fruit juices; not sterilization; heat-tolerant microbes survive. Methods include batch, flash, and ultra-high-temperature pasteurization.
Ultra-high-temperature sterilization: 140°C for 1-3 seconds, then rapid cooling; treated liquids can be stored at room temperature.
Dry heat: Used for materials that cannot be sterilized with moist heat; denatures proteins and oxidizes chemicals; requires higher temperatures and longer times; incineration is ultimate sterilization.
Refrigeration and freezing: Decreases metabolism, growth, and reproduction; chemical reactions are slower; some microbes can multiply in refrigerated foods; slow freezing more effective than quick freezing.
Desiccation: Drying inhibits growth due to removal of water.
Lyophilization: Freeze-drying for long-term preservation; prevents formation of damaging ice crystals.
Osmotic pressure: High concentrations of salt or sugar inhibit growth; cells lose water in hypertonic solutions; fungi tolerate hypertonic environments better than bacteria.
Ionizing radiation: Wavelengths shorter than 1 nm; ejects electrons to create ions; disrupts molecules and DNA; electron beams, gamma rays, and x-rays (x-rays not practical).
Nonionizing radiation: Wavelengths greater than 1 nm; excites electrons, affects proteins and nucleic acids; UV light causes pyrimidine dimers in DNA; suitable for disinfecting air, fluids, and surfaces.
Chemical Methods of Microbial Control
Chemical agents target cell walls, membranes, proteins, or DNA, with effectiveness varying by environmental conditions and microbial type.
Phenol and phenolics: Denature proteins and disrupt membranes; effective in organic matter; remain active for long periods; used in healthcare, labs, homes; have odor and side effects.
Alcohols: Intermediate-level disinfectants; denature proteins and disrupt membranes; more effective than soap; not effective against fungal spores or bacterial endospores.
Halogens: Intermediate-level antimicrobials; damage enzymes by denaturation; widely used.
Oxidizing agents: Peroxides, ozone, peracetic acid; kill by oxidation of enzymes; high-level disinfectants and antiseptics.
Hydrogen peroxide: Disinfects and sterilizes surfaces; not for open wounds.
Ozone: Used for drinking water treatment.
Peracetic acid: Sporicide for sterilizing equipment.
Surfactants: Reduce surface tension; soaps and detergents are good degerming agents but not antimicrobial.
Detergents: Positively charged organic surfactants.
Quaternary ammonium compounds: Low-level disinfectants; disrupt membranes; ideal for medical and industrial applications.
Heavy metal ions: Denature proteins; low-level bacteriostatic and fungistatic agents; examples include silver nitrate, thimerosal, copper.
Aldehydes: Terminal -CHO groups; denature proteins and inactivate nucleic acids; glutaraldehyde and formalin used for disinfection and sterilization.
Gaseous agents: Microbicidal and sporicidal gases; denature proteins and DNA; used in closed chambers; highly explosive, poisonous, and potentially carcinogenic.
Enzymes: Antimicrobial enzymes act against microorganisms; lysozyme in tears; prionzymes remove prions from instruments.
Antimicrobial drugs: Antibiotics, semisynthetic, and synthetic chemicals for disease treatment.
Evaluating the Effectiveness of Disinfectants and Antiseptics
Several tests are used to assess the efficacy of chemical agents in controlling microbial growth.
Test Name | Main Purpose | Procedure | Interpretation |
|---|---|---|---|
Phenol coefficient | Compares efficacy to phenol | Agent's ability to control microbes compared to phenol | Coefficient > 1: More effective than phenol |
Dilution test | Standard test in USA | Metal cylinders dipped in bacteria, immersed in disinfectant, then placed in medium | Prevents growth at highest dilution |
Kelsey-Sykes capacity test | EU-approved alternative | Bacterial suspensions added to chemical, samples removed and incubated | Lack of reproduction reveals minimum effective time |
In-use test | Real-world assessment | Swabs taken before and after application, inoculated and incubated | Determines proper strength and application procedure |
Development of Resistant Microbes
Overuse of antiseptic and disinfecting chemicals can promote the development of resistant microbes. There is little evidence that such products add to human or animal health, but their use may contribute to resistance.
Resistant microbes: Microorganisms that survive exposure to antimicrobial agents, often due to genetic mutations or adaptation.
Public health concern: Resistance can reduce the effectiveness of control methods and complicate infection management.
Example: Autoclaving in Medical Settings
Autoclaving is widely used to sterilize surgical instruments and laboratory materials. The standard conditions (121°C, 15 psi, 15 minutes) ensure destruction of all microorganisms, including endospores.
Additional info:
Some methods, such as lyophilization and osmotic pressure, are particularly important for preserving microbial cultures and food products. The selection of control methods must balance efficacy, safety, and practicality for each application.