Skip to main content
Ch.19 - Electrochemistry
Tro - Chemistry: A Molecular Approach 4th Edition
Tro4th EditionChemistry: A Molecular ApproachISBN: 9780134112831Non è quello che usi tu?Cambia libro di testo
Tutti i libri di testoTro 4th EditionCh.19 - ElectrochemistryProblema 97
Capitolo 19, Problema 97

Make a sketch of an electrolysis cell that electroplates copper onto other metal surfaces. Label the anode and the cathode and indicate the reactions that occur at each.

Guida verificata passo dopo passo
1
Start by drawing a container to represent the electrolysis cell, which will hold the electrolyte solution.
Inside the container, draw two electrodes: one on the left side and one on the right side. Label the left electrode as the 'anode' and the right electrode as the 'cathode'.
Indicate that the anode is made of copper (Cu) and the cathode is the metal surface onto which copper will be electroplated.
Write the oxidation reaction occurring at the anode: Cu(s) \(\rightarrow\) Cu^{2+}(aq) + 2e^{-}. This shows that solid copper is oxidized to copper ions, releasing electrons.
Write the reduction reaction occurring at the cathode: Cu^{2+}(aq) + 2e^{-} \(\rightarrow\) Cu(s). This shows that copper ions in the solution gain electrons to form solid copper, which deposits onto the cathode.

Risposta video verificata per un problema simile:

Questa soluzione video è stata consigliata dai nostri tutor come utile per risolvere questo problema.
Durata del video:
3m

Concetti chiave

Ecco i concetti essenziali che devi comprendere per rispondere correttamente alla domanda.

Electrolysis

Electrolysis is a chemical process that uses electrical energy to drive a non-spontaneous reaction. In the context of electroplating, it involves the decomposition of an electrolyte solution, allowing metal ions to be deposited onto a surface. The process requires an external power source to facilitate the movement of ions, leading to the reduction of metal cations at the cathode and oxidation of the anode material.
Video consigliato:
Percorso guidato
01:21
The Electrolytic Cell

Anode and Cathode

In an electrolysis cell, the anode is the electrode where oxidation occurs, meaning it loses electrons. Conversely, the cathode is where reduction takes place, gaining electrons. In copper electroplating, copper ions from the electrolyte are reduced at the cathode, while copper metal from the anode dissolves into the solution, providing a continuous supply of copper ions.
Video consigliato:
Percorso guidato
00:56
Electrolytic Cell Components Example

Electrolyte Solution

An electrolyte solution is a medium that contains ions and can conduct electricity. In electroplating, the electrolyte typically contains metal salts, such as copper sulfate, which provide the metal ions needed for deposition. The concentration and composition of the electrolyte influence the efficiency and quality of the electroplating process, affecting factors like deposition rate and surface finish.
Video consigliato:
Percorso guidato
02:50
Electrolytes and Strong Acids
Pratica correlata
Domanda del libro di testo

Silver can be electroplated at the cathode of an electrolysis cell by the half-reaction: Ag+(aq) + e– → Ag(s) What mass of silver would plate onto the cathode if a current of 6.8 A flowed through the cell for 72 min?

2188
views
Domanda del libro di testo

Write equations for the half-reactions that occur at the anode and cathode for the electrolysis of each aqueous solution. a. NaBr(aq) b. PbI2(aq) c. Na2SO4(aq)

1
views
Domanda del libro di testo

Write equations for the half-reactions that occur at the anode and cathode for the electrolysis of each aqueous solution. b. KCl(aq) c. CuBr2(aq)

Domanda del libro di testo

Write equations for the half-reactions that occur at the anode and cathode for the electrolysis of each aqueous solution. a. Ni(NO3)2(aq)

3029
views