Skip to main content
Ch. 12 - Static Equilibrium; Elasticity and Fracture
Giancoli Douglas - Physics for Scientists and Engineers 5th edition
Giancoli Douglas5th editionPhysics for Scientists and EngineersISBN: 9780137488179Non è quello che usi tu?Cambia libro di testo
Capitolo 12, Problema 19

A 2300-kg trailer is attached to a stationary truck at point B, Fig. 12–64. Determine the normal force exerted by the road on the rear tires at A, and the vertical force exerted on the trailer by the support B.
Diagram showing a 2300-kg trailer attached to a stationary truck, with forces and distances labeled for analysis.

Guida verificata passo dopo passo
1
Step 1: Begin by analyzing the forces acting on the trailer. Identify the weight of the trailer (W = m * g, where m = 2300 kg and g = 9.8 m/s²) acting downward at the trailer's center of gravity. Also, note the normal force at point A and the vertical force at point B as unknowns.
Step 2: Set up the equilibrium conditions for the trailer. Since the trailer is stationary, the sum of vertical forces must equal zero: N_A + F_B - W = 0, where N_A is the normal force at A, F_B is the vertical force at B, and W is the weight of the trailer.
Step 3: Apply the rotational equilibrium condition about point A. The sum of torques about point A must be zero. Use the distances provided in the diagram (not shown here) to calculate the torque contributions from the weight of the trailer and the vertical force at B. The equation will look like: (distance to center of gravity) * W = (distance to B) * F_B.
Step 4: Solve the torque equation for F_B (the vertical force at B). Substitute the known values for the distances and the weight of the trailer into the equation to isolate F_B.
Step 5: Substitute the value of F_B into the vertical force equilibrium equation (N_A + F_B - W = 0) to solve for N_A, the normal force at A. This will give you the required forces exerted by the road and the support.

Risposta video verificata per un problema simile:

Questa soluzione video è stata consigliata dai nostri tutor come utile per risolvere questo problema.
Durata del video:
10m

Concetti chiave

Ecco i concetti essenziali che devi comprendere per rispondere correttamente alla domanda.

Normal Force

The normal force is the perpendicular force exerted by a surface to support the weight of an object resting on it. In this scenario, it counteracts the gravitational force acting on the trailer and the truck, ensuring that they remain in equilibrium. The magnitude of the normal force can be calculated by considering the weight of the trailer and any additional forces acting on it.
Video consigliato:
Percorso guidato
08:17
The Normal Force

Equilibrium

Equilibrium refers to a state where the sum of forces acting on an object is zero, resulting in no acceleration. For the trailer and truck system, both vertical and horizontal forces must be balanced. This concept is crucial for determining the normal force and the vertical force exerted by the support, as it allows us to set up equations based on the forces involved.
Video consigliato:
Percorso guidato
10:13
Torque & Equilibrium

Weight Distribution

Weight distribution involves how the weight of an object is spread across its supports. In this case, the weight of the trailer affects the forces at points A and B. Understanding how the weight is distributed helps in calculating the normal force at the rear tires and the vertical force at the support, as these forces depend on the total weight and its distribution between the truck and trailer.
Video consigliato:
Percorso guidato
10:19
Torque Due to Weight
Pratica correlata
Domanda del libro di testo

A shop sign weighing 215 N hangs from the end of a uniform 135-N beam as shown in Fig. 12–59. Find the tension in the supporting wire (at 35.0°), and the horizontal and vertical forces exerted by the hinge on the beam at the wall.

1910
views
Domanda del libro di testo

A refrigerator is approximately a uniform rectangular solid 1.9 m tall, 1.0 m wide, and 0.75 m deep. If it sits upright on a truck with its 1.0-m dimension in the direction of travel, and if the refrigerator cannot slide on the truck, how rapidly can the truck accelerate without tipping the refrigerator over? [Hint: The normal force would act at one corner.]

1563
views
Domanda del libro di testo

A uniform rod AB of length 4.5 m and mass M = 3.8 kg is hinged at A and held in equilibrium by a light cord, as shown in Fig. 12–69. A load W = 22 N hangs from the rod at a distance d so that the tension in the cord is 85 N. Draw a free-body diagram for the rod.

1182
views
Domanda del libro di testo

A 172-cm-tall person lies on a light (massless) board which is supported by two scales, one under the top of her head and one beneath the bottom of her feet (Fig. 12–65). The two scales read, respectively, 35.1 and 31.6 kg. What distance is the center of gravity of this person from the top of her head?

<IMAGE>

1425
views
Domanda del libro di testo

Three children are trying to balance on a seesaw, which includes a fulcrum rock acting as a pivot at the center, and a very light board 3.2 m long (Fig. 12–60). Two playmates are already on either end. Boy A has a mass of 45 kg, and boy B a mass of 35 kg. Where should girl C, whose mass is 25 kg, place herself so as to balance the seesaw?

1935
views
1
rank
Domanda del libro di testo

(II) The force required to pull the cork out of the top of a wine bottle is in the range of 200 to 400 N. What range of forces F is required to open a wine bottle with the bottle opener shown in Fig. 12–58?

<IMAGE>

1865
views