Skip to main content
Ch. 29 - Electromagnetic Induction and Faraday's Law
Giancoli Douglas - Physics for Scientists and Engineers 5th edition
Giancoli Douglas5th editionPhysics for Scientists and EngineersISBN: 9780137488179Non è quello che usi tu?Cambia libro di testo
Capitolo 28, Problema 65cd

A high-intensity desk lamp is rated at 35 W but requires only 12 V. It contains a transformer that converts 120-V household voltage.
(c) What is the current in the primary coil?
(d) What is the resistance of the bulb when on?

Guida verificata passo dopo passo
1
Step 1: Understand the problem. The desk lamp uses a transformer to step down the voltage from 120 V (primary coil) to 12 V (secondary coil). The lamp is rated at 35 W, which means it consumes 35 W of power. We need to calculate (c) the current in the primary coil and (d) the resistance of the bulb when it is on.
Step 2: Use the power formula to find the current in the secondary coil. The formula for power is: P = VI, where P is power, V is voltage, and I is current. Rearrange to solve for current: I = P/V. Substitute the given values for the secondary coil: P = 35 W and V = 12 V.
Step 3: Use the transformer principle to relate the primary and secondary currents. The transformer equation is: Vp/Vs = Is/Ip, where Vp and Vs are the primary and secondary voltages, and Ip and Is are the primary and secondary currents. Rearrange to solve for the primary current: Ip = (Vs/Vp)Is. Substitute the known values: Vp = 120 V, Vs = 12 V, and the secondary current calculated in Step 2.
Step 4: To find the resistance of the bulb, use Ohm's Law: R = V/I, where R is resistance, V is voltage, and I is current. Use the secondary voltage V = 12 V and the secondary current calculated in Step 2 to find the resistance of the bulb.
Step 5: Summarize the process. First, calculate the secondary current using the power formula. Then, use the transformer equation to find the primary current. Finally, use Ohm's Law to determine the resistance of the bulb. Ensure all units are consistent throughout the calculations.

Risposta video verificata per un problema simile:

Questa soluzione video è stata consigliata dai nostri tutor come utile per risolvere questo problema.
Durata del video:
3m

Concetti chiave

Ecco i concetti essenziali che devi comprendere per rispondere correttamente alla domanda.

Ohm's Law

Ohm's Law states that the current (I) flowing through a conductor between two points is directly proportional to the voltage (V) across the two points and inversely proportional to the resistance (R) of the conductor. It is mathematically expressed as V = I * R. This principle is essential for calculating current and resistance in electrical circuits.
Video consigliato:
Percorso guidato
03:07
Resistance and Ohm's Law

Power in Electrical Circuits

Power (P) in electrical circuits is defined as the rate at which electrical energy is consumed or converted into another form of energy. It is calculated using the formula P = V * I, where P is power in watts, V is voltage in volts, and I is current in amperes. Understanding this concept is crucial for determining the current and resistance in the given lamp scenario.
Video consigliato:
Percorso guidato
06:18
Power in Circuits

Transformers

Transformers are electrical devices that transfer electrical energy between two or more circuits through electromagnetic induction. They can step up or step down voltage levels while conserving power. In this context, the transformer converts the higher household voltage (120 V) to the lower voltage (12 V) required by the lamp, which is key to solving for the current in the primary coil.
Video consigliato:
Pratica correlata
Domanda del libro di testo

The primary windings of a transformer which has an 85% efficiency are connected to 110-V ac. The secondary windings are connected across a 2.4-Ω, 75-W lightbulb.

(a) Calculate the current through the primary windings of the transformer.

(b) Calculate the ratio of the number of primary windings of the transformer to the number of secondary windings of the transformer.

1669
views
Domanda del libro di testo

What is the energy dissipated as a function of time in a circular loop of 18 turns of wire having a radius of 10.0 cm and a resistance of 2.0 Ω if the plane of the loop is perpendicular to a magnetic field given by B(t) = B₀e⁻ᵗ/ʳ with B₀ = 0.50 T and τ = 0.10 s?

1279
views
Domanda del libro di testo

Apply Faraday’s law, in the form of Eq. 29–8, to show that the static electric field between the plates of a parallel-plate capacitor cannot drop abruptly to zero at the edges, but must, in fact, fringe. Use the path shown dashed in Fig. 29–61. [Hint: Assume the contrary: that there is no fringing. Show that this assumption leads to a contradiction.]

1371
views
Domanda del libro di testo

A circular loop of area 12 m² encloses a magnetic field perpendicular to the plane of the loop; its magnitude is B(t) = (8.0 T/s)t. The loop is connected to a 7.5-Ω resistor and a 6.5-pF capacitor in series. When fully charged, how much charge is stored on the capacitor?

1285
views
Domanda del libro di testo

Determine the magnetic field at a point P due to a very long wire with a square bend as shown in Fig. 28–63. The point P is halfway between the two corners.

710
views
Domanda del libro di testo

A high-intensity desk lamp is rated at 35 W but requires only 12 V. It contains a transformer that converts 120-V household voltage.

(a) Is the transformer step-up or step-down?

(b) What is the current in the secondary coil when the lamp is on?

1758
views