Skip to main content
Ch. 29 - Electromagnetic Induction and Faraday's Law
Giancoli Douglas - Physics for Scientists and Engineers 5th edition
Giancoli Douglas5th editionPhysics for Scientists and EngineersISBN: 9780137488179Non è quello che usi tu?Cambia libro di testo
Tutti i libri di testoGiancoli Douglas 5th editionCh. 29 - Electromagnetic Induction and Faraday's LawProblema 47
Capitolo 28, Problema 47

Neon signs require 12 kV for their operation. To operate from a 240-V line, what must be the ratio of secondary to primary turns of the transformer? What would the voltage output be if the transformer were connected in reverse?

Guida verificata passo dopo passo
1
Step 1: Understand the problem. A transformer is used to step up or step down voltage. The ratio of secondary to primary turns determines the voltage transformation. The formula for the voltage ratio is \( \frac{V_s}{V_p} = \frac{N_s}{N_p} \), where \( V_s \) and \( V_p \) are the secondary and primary voltages, and \( N_s \) and \( N_p \) are the secondary and primary turns.
Step 2: Identify the given values. The primary voltage \( V_p \) is 240 V, and the secondary voltage \( V_s \) is 12 kV (12,000 V). Substitute these values into the formula \( \frac{V_s}{V_p} = \frac{N_s}{N_p} \) to find the ratio of secondary to primary turns.
Step 3: Rearrange the formula to solve for the turns ratio: \( \frac{N_s}{N_p} = \frac{V_s}{V_p} \). Substitute \( V_s = 12,000 \, \text{V} \) and \( V_p = 240 \, \text{V} \) into the equation.
Step 4: To determine the voltage output if the transformer is connected in reverse, reverse the roles of \( V_s \) and \( V_p \). Use the same turns ratio \( \frac{N_s}{N_p} \) to calculate the new secondary voltage when the primary voltage is 12 kV.
Step 5: Substitute \( V_p = 12,000 \, \text{V} \) and the calculated turns ratio into the formula \( V_s = V_p \times \frac{N_p}{N_s} \) to find the reversed secondary voltage. This step completes the problem-solving process.

Risposta video verificata per un problema simile:

Questa soluzione video è stata consigliata dai nostri tutor come utile per risolvere questo problema.
Durata del video:
4m

Concetti chiave

Ecco i concetti essenziali che devi comprendere per rispondere correttamente alla domanda.

Transformer Basics

A transformer is an electrical device that transfers electrical energy between two or more circuits through electromagnetic induction. It consists of primary and secondary coils, where the voltage is transformed based on the turns ratio of these coils. The relationship between the primary voltage (input) and secondary voltage (output) is given by the formula Vp/Vs = Np/Ns, where V is voltage and N is the number of turns in the coils.
Video consigliato:
Percorso guidato
03:00
Transformers

Turns Ratio

The turns ratio of a transformer is the ratio of the number of turns in the primary coil to the number of turns in the secondary coil. This ratio determines how the voltage is stepped up or stepped down. For example, if the turns ratio is greater than one, the transformer steps down the voltage; if it is less than one, it steps up the voltage. In this case, to find the required turns ratio for a 12 kV output from a 240 V input, the ratio can be calculated as 12,000 V / 240 V.
Video consigliato:
Percorso guidato
05:32
Ratio of energies of cylinder on surface

Reverse Connection of Transformer

When a transformer is connected in reverse, the primary and secondary roles are swapped, meaning the secondary coil becomes the input and the primary coil becomes the output. This configuration can be used to step down the voltage from a higher level to a lower level. The output voltage in this case can be calculated using the same turns ratio, but it will yield a lower voltage than the original primary input, demonstrating the principle of energy conservation in transformers.
Video consigliato:
Percorso guidato
03:00
Transformers
Pratica correlata
Domanda del libro di testo

(III) Suppose a conducting rod (mass m, resistance R) rests on two frictionless and resistanceless parallel rails a distance ℓ apart in a uniform magnetic field B→\(\overrightarrow{B}\) (⊥ to the rails and to the rod) as in Fig. 29–53. At t = 0, the rod is at rest and a source of emf is connected to the points a and b. Determine the speed of the rod as a function of time if (a) the source puts out a constant current I, (b) the source puts out a constant emf ε₀. (c) Does the rod reach a terminal speed in either case? If so, what is it?

143
views
Domanda del libro di testo

If 75 MW of power at 45 kV (rms) arrives at a town from a generator via transmission lines of total resistance 3.0 Ω, calculate (a) the emf at the generator end of the lines, and (b) the fraction of the power generated that is wasted in the lines.

1956
views
Domanda del libro di testo

(II) For the electric power transmission system shown in Fig. 29–26, what is the ratio Ns/Np for (a) the step-up transformer, (b) the step-down transformer next to the home?

1668
views
Domanda del libro di testo

A model-train transformer plugs into 120-V ac and draws 0.35 A while supplying 6.5 A to the train.

(a) What voltage is present across the tracks?

(b) Is the transformer step-up or step-down?

1494
views
Domanda del libro di testo

A transformer has 680 turns in the primary coil and 85 in the secondary coil. What kind of transformer is this, and by what factor does it change the voltage? By what factor does it change the current?

1569
views