Skip to main content
Ch 30: Electromagnetic Induction
Knight Calc - Physics for Scientists and Engineers 5th Edition
Knight Calc5th EditionPhysics for Scientists and EngineersISBN: 9780137344796Non è quello che usi tu?Cambia libro di testo
Tutti i libri di testoKnight Calc 5th EditionCh 30: Electromagnetic InductionProblema 70b
Capitolo 30, Problema 70b

CALC The current through inductance L is given by I=I0e−t/τI = I_0 e^{-t/\(\tau\)}. Evaluate ΔVL at t = 0, 1.0, and 3.0 ms if L = 20 mH, I0 = 50 mA, and τ\(\tau\) = 1.0 ms.

Guida verificata passo dopo passo
1
Step 1: Recall the formula for the voltage across an inductor, which is given by ΔV_L = L * (dI/dt), where L is the inductance and dI/dt is the time derivative of the current I.
Step 2: Write the given current equation I(t) = I_0 * e^(-t/τ). Differentiate this equation with respect to time t to find dI/dt. The derivative is dI/dt = -I_0/τ * e^(-t/τ).
Step 3: Substitute the given values into the expression for dI/dt. Use I_0 = 50 mA (0.050 A), τ = 1.0 ms (0.001 s), and L = 20 mH (0.020 H). The expression becomes ΔV_L = L * (-I_0/τ * e^(-t/τ)).
Step 4: Evaluate ΔV_L at the specified times t = 0, 1.0 ms, and 3.0 ms. For each time, substitute t into the expression ΔV_L = 0.020 * (-0.050/0.001) * e^(-t/0.001). Simplify the exponential term e^(-t/0.001) for each time value.
Step 5: After substituting and simplifying for each time value, you will have the voltage across the inductor ΔV_L at t = 0, 1.0 ms, and 3.0 ms. Ensure the units are consistent throughout the calculation (e.g., volts for ΔV_L).

Risposta video verificata per un problema simile:

Questa soluzione video è stata consigliata dai nostri tutor come utile per risolvere questo problema.

Concetti chiave

Ecco i concetti essenziali che devi comprendere per rispondere correttamente alla domanda.

Inductance

Inductance is a property of an electrical component, typically a coil or inductor, that quantifies its ability to store energy in a magnetic field when an electric current flows through it. The unit of inductance is the henry (H). In circuits, inductance affects how quickly current can change, influencing the behavior of the circuit during transient states.
Video consigliato:
Percorso guidato
12:59
Mutual Induction

Time Constant (τ)

The time constant, denoted as τ (tau), is a measure of the time it takes for the current in an inductor to reach approximately 63.2% of its maximum value after a change in voltage. It is calculated as τ = L/R, where L is inductance and R is resistance. In this context, τ helps determine how quickly the current decays over time.
Video consigliato:
Percorso guidato
08:59
Phase Constant of a Wave Function

Voltage Across an Inductor (ΔVL)

The voltage across an inductor (ΔVL) is related to the rate of change of current through it. According to Faraday's law of electromagnetic induction, this voltage can be expressed as ΔVL = L * (dI/dt), where dI/dt is the rate of change of current with respect to time. Understanding this relationship is crucial for evaluating the voltage at specific time intervals in the given problem.
Video consigliato:
Percorso guidato
07:10
Inductors in Circuits
Pratica correlata
Domanda del libro di testo

An electric oscillator is made with a 0.10 μF capacitor and a 1.0 mH inductor. The capacitor is initially charged to 5.0 V. What is the maximum current through the inductor as the circuit oscillates?

1598
views
Domanda del libro di testo

A 50 cm solenoid with 1000 turns has an inductance of 20 mH. What is the magnetic field strength inside the inductor when the current is 75 mA?

126
views
Domanda del libro di testo

A 50 cm solenoid with 1000 turns has an inductance of 20 mH. Flipping a switch disconnects the inductor from the battery and connects it to a resistor. What is the value of the resistance if the magnetic field decreases by 50% in 150 μs?

1643
views
Domanda del libro di testo

CALC The current through inductance L is given by I=I0e−t/τI = I_0 e^{-t/\(\tau\)}. Find an expression for the potential difference ΔVL across the inductor.

114
views
Domanda del libro di testo

An LC circuit is built with a 20 mH inductor and an 8.0 pF capacitor. The capacitor voltage has its maximum value of 25 V at t = 0 s. What is the inductor current at that time?

1660
views
Domanda del libro di testo

The 300 μF capacitor in FIGURE P30.75 is initially charged to 100 V, the 1200 μF capacitor is uncharged, and the switches are both open. What is the maximum voltage to which you can charge the 1200 μF capacitor by the proper closing and opening of the two switches?

1966
views