Skip to main content
Ch 33: Wave Optics
Knight Calc - Physics for Scientists and Engineers 5th Edition
Knight Calc5th EditionPhysics for Scientists and EngineersISBN: 9780137344796Non è quello che usi tu?Cambia libro di testo
Capitolo 33, Problema 67b

Light of wavelength 600 nm passes though two slits separated by 0.20 mm and is observed on a screen 1.0 m behind the slits. The location of the central maximum is marked on the screen and labeled y = 0. A very thin piece of glass is then placed in one slit. Because light travels slower in glass than in air, the wave passing through the glass is delayed by 5.0×10−16 s in comparison to the wave going through the other slit. What fraction of the period of the light wave is this delay?

Guida verificata passo dopo passo
1
Determine the period of the light wave using the relationship between the speed of light, wavelength, and frequency. The formula for frequency is \( f = \frac{c}{\lambda} \), where \( c \) is the speed of light (\( 3.0 \times 10^8 \ \text{m/s} \)) and \( \lambda \) is the wavelength (600 nm or \( 600 \times 10^{-9} \ \text{m} \)). The period \( T \) is the reciprocal of the frequency: \( T = \frac{1}{f} \).
Substitute the given values into the formula \( f = \frac{c}{\lambda} \) to calculate the frequency of the light wave. Then, use \( T = \frac{1}{f} \) to find the period of the wave.
Compare the given time delay (\( 5.0 \times 10^{-16} \ \text{s} \)) to the period of the wave. To find the fraction of the period, divide the time delay by the period: \( \text{Fraction} = \frac{\text{Time Delay}}{T} \).
Simplify the fraction by substituting the calculated value of \( T \) from the previous step.
Interpret the result to express the fraction of the period that corresponds to the given time delay.

Risposta video verificata per un problema simile:

Questa soluzione video è stata consigliata dai nostri tutor come utile per risolvere questo problema.

Concetti chiave

Ecco i concetti essenziali che devi comprendere per rispondere correttamente alla domanda.

Wavelength and Frequency

Wavelength is the distance between successive peaks of a wave, while frequency is the number of peaks that pass a point in a given time. For light, these two are related by the speed of light (c = λf), where λ is the wavelength and f is the frequency. Understanding this relationship is crucial for analyzing wave behavior, especially in interference patterns.
Video consigliato:
Percorso guidato
05:08
Circumference, Period, and Frequency in UCM

Wave Period

The period of a wave is the time it takes for one complete cycle of the wave to pass a given point. It is the inverse of frequency (T = 1/f). In the context of light waves, knowing the period allows us to relate time delays, such as the one caused by the glass, to the fraction of the wave cycle that is affected.
Video consigliato:
Percorso guidato
06:28
Satellite Period

Phase Difference

Phase difference refers to the difference in the phase of two waves at a given point in time. It is often expressed in terms of fractions of the wavelength or cycles. In this scenario, the delay introduced by the glass results in a phase difference that can affect the interference pattern observed on the screen, making it essential to calculate the fraction of the wave period that corresponds to the time delay.
Video consigliato:
Percorso guidato
08:59
Phase Constant of a Wave Function
Pratica correlata
Domanda del libro di testo

Light of wavelength 600 nm passes though two slits separated by 0.20 mm and is observed on a screen 1.0 m behind the slits. The location of the central maximum is marked on the screen and labeled y = 0. With the glass in place, what is the phase difference Δϕ0 between the two waves as they leave the slits?

112
views
Domanda del libro di testo

A helium-neon laser (λ = 633 nm) is built with a glass tube of inside diameter 1.0 mm, as shown in FIGURE P33.62. One mirror is partially transmitting to allow the laser beam out. An electrical discharge in the tube causes it to glow like a neon light. From an optical perspective, the laser beam is a light wave that diffracts out through a 1.0-mm-diameter circular opening. Can a laser beam be perfectly parallel, with no spreading? Why or why not?

102
views
Domanda del libro di testo

A radar for tracking aircraft broadcasts a 12 GHz microwave beam from a 2.0-m-diameter circular radar antenna. From a wave perspective, the antenna is a circular aperture through which the microwaves diffract. If the antenna emits 100 kW of power, what is the average microwave intensity at 30 km?

54
views
Domanda del libro di testo

A double-slit experiment is set up using a helium-neon laser (λ = 633 nm). Then a very thin piece of glass (n = 1.50) is placed over one of the slits. Afterward, the central point on the screen is occupied by what had been the m = 10 dark fringe. How thick is the glass?

1958
views
Domanda del libro di testo

A helium-neon laser (λ = 633 nm) is built with a glass tube of inside diameter 1.0 mm, as shown in FIGURE P33.62. One mirror is partially transmitting to allow the laser beam out. An electrical discharge in the tube causes it to glow like a neon light. From an optical perspective, the laser beam is a light wave that diffracts out through a 1.0-mm-diameter circular opening. What is the diameter (in mm) of the laser beam after it travels 3.0 m? Note that the wave model is appropriate because the spreading, at this distance, is significantly larger than the size of the opening.

74
views
Domanda del libro di testo

A Michelson interferometer operating at a 600 nm wavelength has a 2.00-cm-long glass cell in one arm. To begin, the air is pumped out of the cell and mirror M₂ is adjusted to produce a bright spot at the center of the interference pattern. Then a valve is opened and air is slowly admitted into the cell. The index of refraction of air at 1.00 atm pressure is 1.00028. How many bright-dark-bright fringe shifts are observed as the cell fills with air?

100
views