Skip to main content
Ch 29: Electromagnetic Induction
Young & Freedman Calc - University Physics 14th Edition
Young & Freedman Calc14th EditionUniversity PhysicsISBN: 9780321973610Non è quello che usi tu?Cambia libro di testo
Tutti i libri di testoYoung & Freedman Calc 14th EditionCh 29: Electromagnetic InductionProblema 38
Capitolo 29, Problema 38

A long, thin solenoid has 900 turns per meter and radius 2.50 cm. The current in the solenoid is increasing at a uniform rate of 36.0 A/s. What is the magnitude of the induced electric field at a point near the center of the solenoid and (a) 0.500 cm from the axis of the solenoid; (b) 1.00 cm from the axis of the solenoid?

Guida verificata passo dopo passo
1
Understand that the problem involves a solenoid with a changing current, which induces an electric field. The solenoid has 900 turns per meter, a radius of 2.50 cm, and the current is increasing at 36.0 A/s.
Recall Faraday's law of electromagnetic induction, which states that a changing magnetic field within a closed loop induces an electromotive force (EMF) in the loop. The induced electric field (E) can be found using the formula: \( E = \frac{r}{2} \frac{dB}{dt} \), where \( r \) is the distance from the axis and \( \frac{dB}{dt} \) is the rate of change of the magnetic field.
Calculate the rate of change of the magnetic field \( \frac{dB}{dt} \) inside the solenoid using the formula: \( \frac{dB}{dt} = \mu_0 n \frac{dI}{dt} \), where \( \mu_0 \) is the permeability of free space (\( 4\pi \times 10^{-7} \) T·m/A), \( n \) is the number of turns per unit length (900 turns/m), and \( \frac{dI}{dt} \) is the rate of change of current (36.0 A/s).
For part (a), substitute \( r = 0.500 \) cm (converted to meters) into the formula for the induced electric field: \( E = \frac{r}{2} \frac{dB}{dt} \). Calculate \( E \) using the previously found \( \frac{dB}{dt} \).
For part (b), repeat the process with \( r = 1.00 \) cm (converted to meters) to find the induced electric field at this distance from the axis of the solenoid.

Risposta video verificata per un problema simile:

Questa soluzione video è stata consigliata dai nostri tutor come utile per risolvere questo problema.
Durata del video:
10m

Concetti chiave

Ecco i concetti essenziali che devi comprendere per rispondere correttamente alla domanda.

Faraday's Law of Electromagnetic Induction

Faraday's Law states that a changing magnetic field within a closed loop induces an electromotive force (EMF) in the loop. The induced EMF is proportional to the rate of change of the magnetic flux through the loop. In the context of a solenoid, the changing current alters the magnetic field, inducing an electric field in the surrounding space.
Video consigliato:
Percorso guidato
09:26
Faraday's Law

Magnetic Field Inside a Solenoid

The magnetic field inside a long, thin solenoid is uniform and parallel to the axis of the solenoid. It is given by B = μ₀nI, where μ₀ is the permeability of free space, n is the number of turns per unit length, and I is the current. This uniform field is crucial for calculating the change in magnetic flux, which is needed to determine the induced electric field.
Video consigliato:
Percorso guidato
05:22
Magnetic Field Inside a Solenoid

Induced Electric Field in a Solenoid

The induced electric field in a solenoid due to a changing current can be calculated using the relationship E = (r/2) * (dB/dt), where r is the radial distance from the axis, and dB/dt is the rate of change of the magnetic field. This formula arises from integrating the induced EMF around a circular path concentric with the solenoid, highlighting how the field varies with distance from the axis.
Video consigliato:
Percorso guidato
03:16
Intro to Electric Fields
Pratica correlata
Domanda del libro di testo

The magnetic field within a long, straight solenoid with a circular cross section and radius R is increasing at a rate of dB/dt. What is the magnitude of the induced emf if the radius in part (d) is 2R?

2041
views
Domanda del libro di testo

The magnetic field B at all points within the colored circle shown in Fig. E29.15 has an initial magnitude of 0.750 T. (The circle could represent approximately the space inside a long, thin solenoid.) The magnetic field is directed into the plane of the diagram and is decreasing at the rate of -0.0350 T/s. What is the current in the ring if its resistance is 4.00 Ω?

<Image>

1427
views
Domanda del libro di testo

A metal ring 4.50 cm in diameter is placed between the north and south poles of large magnets with the plane of its area perpendicular to the magnetic field. These magnets produce an initial uniform field of 1.12 T between them but are gradually pulled apart, causing this field to remain uniform but decrease steadily at 0.250 T/s. What is the magnitude of the electric field induced in the ring?

2190
views
1
rank
Domanda del libro di testo

A long, thin solenoid has 400 turns per meter and radius 1.10 cm. The current in the solenoid is increasing at a uniform rate di/dt. The induced electric field at a point near the center of the solenoid and 3.50 cm from its axis is 8.00 × 10-6 V/m. Calculate di/dt.

2564
views
1
rank
Domanda del libro di testo

The magnetic field within a long, straight solenoid with a circular cross section and radius R is increasing at a rate of dB/dt. What is the magnitude of the induced emf in a circular turn of radius R/2 that has its center on the solenoid axis?

1873
views
Domanda del libro di testo

The magnetic field B at all points within the colored circle shown in Fig. E29.15 has an initial magnitude of 0.750 T. (The circle could represent approximately the space inside a long, thin solenoid.) The magnetic field is directed into the plane of the diagram and is decreasing at the rate of -0.0350 T/s. What is the shape of the field lines of the induced electric field shown in Fig. E29.15 , within the colored circle?

<Image>

1784
views