Skip to main content
Ch 29: Electromagnetic Induction
Young & Freedman Calc - University Physics 14th Edition
Young & Freedman Calc14th EditionUniversity PhysicsISBN: 9780321973610Non è quello che usi tu?Cambia libro di testo
Tutti i libri di testoYoung & Freedman Calc 14th EditionCh 29: Electromagnetic InductionProblema 40c
Capitolo 29, Problema 40c

The magnetic field B at all points within the colored circle shown in Fig. E29.15 has an initial magnitude of 0.750 T. (The circle could represent approximately the space inside a long, thin solenoid.) The magnetic field is directed into the plane of the diagram and is decreasing at the rate of -0.0350 T/s. What is the current in the ring if its resistance is 4.00 Ω?
<Image>

Guida verificata passo dopo passo
1
Identify that the problem involves electromagnetic induction, specifically Faraday's law of induction, which relates the induced electromotive force (emf) in a loop to the rate of change of magnetic flux through the loop.
Use Faraday's law of induction, which states that the induced emf (ε) is equal to the negative rate of change of magnetic flux (Φ) through the loop: ε = -dΦ/dt.
Recognize that the magnetic flux (Φ) through the loop is given by the product of the magnetic field (B) and the area (A) of the loop: Φ = B * A. Since the magnetic field is uniform and perpendicular to the plane of the loop, this simplifies the calculation.
Calculate the rate of change of magnetic flux. Given that the magnetic field is decreasing at a rate of -0.0350 T/s, the rate of change of flux is dΦ/dt = A * dB/dt, where A is the area of the circle.
Apply Ohm's law to find the current (I) in the ring. Ohm's law states that I = ε/R, where R is the resistance of the ring. Substitute the expression for the induced emf from Faraday's law to find the current: I = (-A * dB/dt) / R.

Risposta video verificata per un problema simile:

Questa soluzione video è stata consigliata dai nostri tutor come utile per risolvere questo problema.
Durata del video:
5m

Concetti chiave

Ecco i concetti essenziali che devi comprendere per rispondere correttamente alla domanda.

Faraday's Law of Electromagnetic Induction

Faraday's Law states that a change in magnetic flux through a circuit induces an electromotive force (EMF) in the circuit. The induced EMF is proportional to the rate of change of the magnetic flux. In this scenario, the decreasing magnetic field within the solenoid leads to a change in flux, which induces a current in the ring according to this principle.
Video consigliato:
Percorso guidato
09:26
Faraday's Law

Ohm's Law

Ohm's Law relates the voltage (V), current (I), and resistance (R) in an electrical circuit through the equation V = IR. In this case, the induced EMF from Faraday's Law acts as the voltage across the ring, and knowing the resistance allows us to calculate the current flowing through the ring when the magnetic field changes.
Video consigliato:
Percorso guidato
03:07
Resistance and Ohm's Law

Magnetic Flux

Magnetic flux is defined as the product of the magnetic field (B) and the area (A) through which it passes, taking into account the angle between the field lines and the normal to the surface. It is a measure of the quantity of magnetism, considering both the strength and extent of the magnetic field. In this problem, the change in magnetic flux due to the decreasing magnetic field is crucial for determining the induced current.
Video consigliato:
Percorso guidato
04:52
Magnetic Flux
Pratica correlata
Domanda del libro di testo

The magnetic field B at all points within the colored circle shown in Fig. E29.15 has an initial magnitude of 0.750 T. (The circle could represent approximately the space inside a long, thin solenoid.) The magnetic field is directed into the plane of the diagram and is decreasing at the rate of -0.0350 T/s. What is the emf between points a and b on the ring?

<Image>

1967
views
Domanda del libro di testo

A long, straight solenoid with a cross-sectional area of 8.00 cm2 is wound with 90 turns of wire per centimeter, and the windings carry a current of 0.350 A. A second winding of 12 turns encircles the solenoid at its center. The current in the solenoid is turned off such that the magnetic field of the solenoid becomes zero in 0.0400 s. What is the average induced emf in the second winding?

3153
views
1
rank
Domanda del libro di testo

A long, thin solenoid has 400 turns per meter and radius 1.10 cm. The current in the solenoid is increasing at a uniform rate di/dt. The induced electric field at a point near the center of the solenoid and 3.50 cm from its axis is 8.00 × 10-6 V/m. Calculate di/dt.

2564
views
1
rank
Domanda del libro di testo

A long, thin solenoid has 900 turns per meter and radius 2.50 cm. The current in the solenoid is increasing at a uniform rate of 36.0 A/s. What is the magnitude of the induced electric field at a point near the center of the solenoid and (a) 0.500 cm from the axis of the solenoid; (b) 1.00 cm from the axis of the solenoid?

2598
views
1
rank
Domanda del libro di testo

The magnetic field B at all points within the colored circle shown in Fig. E29.15 has an initial magnitude of 0.750 T. (The circle could represent approximately the space inside a long, thin solenoid.) The magnetic field is directed into the plane of the diagram and is decreasing at the rate of -0.0350 T/s. If the ring is cut at some point and the ends are separated slightly, what will be the emf between the ends?

<Image>

1795
views
Domanda del libro di testo

The magnetic field B at all points within the colored circle shown in Fig. E29.15 has an initial magnitude of 0.750 T. (The circle could represent approximately the space inside a long, thin solenoid.) The magnetic field is directed into the plane of the diagram and is decreasing at the rate of -0.0350 T/s. What is the shape of the field lines of the induced electric field shown in Fig. E29.15 , within the colored circle?

<Image>

1784
views