Skip to main content
뒤로

Solutions and Solubility: Principles and Applications in Pharmaceutical Preparations

스터디 가이드 - 스마트 노트

자료에 맞춘 맞춤형 노트, 핵심 정의, 예시, 맥락을 확장해 제공합니다.

Solutions & Solubility

Definition and Characteristics

A solution is a chemically and physically homogeneous mixture of two or more substances, where the components are evenly distributed at the molecular level. Solutions are commonly used in pharmaceutical and physiological contexts for drug delivery and biochemical reactions.

  • Homogeneous mixture: The dispersion medium is a liquid.

  • Oral dosage forms: Most common route of administration for solutions.

  • Liquid preparations: Solutions may contain one or more soluble chemical substances, usually dissolved in a suitable solvent or mixture of mutually miscible solvents (liquids that mix without separating).

Dispersions

Types of Dispersions

Dispersions are classified based on the size of the particles dispersed in the medium.

  • True Solutions: Dispersed phase consists of ions and small molecules (particle size less than 1 nanometer).

  • Colloidal Dispersions: Larger particles, e.g., proteins (particle size: 1 to 100 nm). Homogeneous to the naked eye, but not at the molecular level.

  • Coarse Dispersions: Heterogeneous mixture with particles of one substance dispersed throughout another. Particle size is relatively large (greater than 1000 nanometers).

Saturated, Unsaturated, and Supersaturated Solutions

Definitions

  • Saturated Solution: In equilibrium with solid phase; no more solute can be dissolved.

  • Supersaturated Solution: Contains more dissolved solute than it normally would at equilibrium; unstable.

  • Unsaturated Solution: Contains dissolved solute in a concentration below that required for saturation; more solute can be dissolved.

Solubility

Definition and Descriptive Terms

Solubility is the spontaneous interaction of two or more substances to form a homogeneous molecular dispersion.

Descriptive Term

Parts of Solvent Required for 1 Part of Solute

Very soluble

Less than 1

Freely soluble

1 to 10

Soluble

10 to 30

Sparingly soluble

30 to 100

Slightly soluble

100 to 1000

Very slightly soluble

1000 to 10,000

Practically insoluble

More than 10,000

Solubility Problems

  • Poor water solubility due to high lipophilicity (hydrophobicity) causes significant problems in drug formulation.

  • Low aqueous solubility can lead to low dissolution rates and poor bioavailability.

Need for Solubility Enhancement

  • Physicochemical properties: Interactions with other substances and behavior in different environments.

  • Permeability through biological membranes: Affects absorption and distribution.

  • Therapeutic activity: Refers to the drug's ability to produce the desired health effect.

Types of Solvents Used for Liquid Preparations

Classification

  • Polar solvents: Good conductors of electricity, high dielectric constants, dissolve ionic and polar molecules (e.g., water).

  • Semi-polar solvents: Dissolve some types of dipolar molecules but do not form hydrogen bonds (e.g., acetone).

  • Non-polar solvents: No dipolar character, do not dissolve ionic compounds (e.g., hydrocarbons, oils).

Mechanisms of Solubility

Solvation (Hydration)

Dissolution of ionic compounds by hydration, where water molecules surround ions due to high dielectric constant.

Factors Affecting Dissolution and Solubility

Enhancement Factors

  • Heat (dissolution rate increases with temperature)

  • Reduced particle size (increases surface area)

  • Use of a suitable solvent

  • Rigorous agitation

Modified Noyes-Whitney Equation

The rate of dissolution is described by:

  • D = diffusion coefficient

  • A = surface area of dissolving solid

  • C1 = concentration in bulk medium

  • C2 = concentration at the surface of the solid

  • h = thickness of the diffusion layer

The larger the difference in concentration (C1 - C2) across the diffusion layer, the faster the dissolution.

Effect of Temperature

  • If heat is absorbed (endothermic), solubility increases with temperature.

  • If heat is released (exothermic), solubility decreases with temperature.

Effect of Electrolytes

  • Electrolytes: Substances that dissociate into ions in water, affecting solubility.

  • Non-electrolytes: Do not dissociate into ions; solubility may be affected by added electrolytes (salting out or salting in).

pH Adjustment & Salt Formation

  • Adjusting pH can increase solubility by forming salts of weak acids or bases.

  • Solubility of weak acid:

  • Solubility of weak base:

Crystalline vs. Amorphous Forms

Crystalline

Amorphous

Lower solubility Higher melting point

Higher solubility Lower melting point

Miscibility & Solubility of Liquids

  • Completely miscible systems: Water in alcohol, glycerin in water.

  • Partially miscible systems: Water is partially miscible in ether; water and phenol are immiscible to some extent.

Partition of Solutes Between Immiscible Liquids

If a solute is added to a system of two immiscible liquids, it will distribute between the two liquids in a ratio reflective of its solubility in each liquid.

Solvents for Oral Preparations

  • Purified water: Obtained by distillation; used for parenteral (injectable) products.

  • Sterile water for injection: Free of pyrogen (fever-causing agents).

  • Bacteriostatic water for injection: Contains bacteriostatic agents to prevent bacterial growth.

Osmosis Method

  • Used to concentrate solutions; simpler equipment than distillation.

Glycerin

  • Higher viscosity than alcohol and water.

Preservatives

  • Prevent growth of bacteria and microorganisms.

  • Interfere with microbial growth, multiplication, and metabolism.

  • Preservatives must remain effective for the entire shelf-life of the product.

Product Types of Oral Pharmaceutical Solutions

Syrups

  • Contain high concentration of sugar; viscous and sweet.

  • Not a preservative due to low water content.

  • May contain flavoring agents (cherry, orange, cocoa).

Elixirs

  • Hydro-alcoholic solutions; contain sugar and alcohol.

  • Help dissolve medications not soluble in water alone.

  • Contain more alcohol than syrups (21-23%).

Spirits

  • Alcoholic solutions containing fragrant compounds; used for flavor and medicinal purposes.

Aromatic Waters

  • Water as solvent; used for flavoring.

Tinctures & Fluid Extracts

  • Prepared by extracting active constituents from crude drug material.

  • Fluid extracts: Liquid extracts of vegetable drugs containing alcohol as solvent.

Preparation Methods

Preparation of Sugar with Heat

  • Rapid method; may result in caramelization and loss of taste.

Solution by Agitation without Heat

  • Slow process; colorless syrup; mixture stirred until completely dissolved.

Percolation

  • Extraction process where solvent passes through a column of granulated material to dissolve desired components.

  • Percolator: Cylindrical or tapered vessel with controlled flow.

Tinctures, Fluid Extracts, Extracts

  • Tinctures: Separation of desired compounds from a source material using a solvent.

  • Crude Drugs: Natural, unprocessed plant or animal materials.

  • Extracts: Active component extracted from crude drug.

  • Fluid Extracts: Liquid extracts of vegetable drugs, often referred to as "100% tinctures" due to high alcohol content.

Additional info: These notes are primarily focused on pharmaceutical solutions and solubility, which are relevant to Anatomy & Physiology students for understanding drug delivery, absorption, and biochemical interactions in the body.

Pearson Logo

스터디 프렙