Skip to main content
뒤로

Gases, Solutions, Equilibrium, and Acid-Base Chemistry: Study Guide for GOB Chemistry

스터디 가이드 - 스마트 노트

자료에 맞춘 맞춤형 노트, 핵심 정의, 예시, 맥락을 확장해 제공합니다.

Gases and Gas Laws

Kinetic Molecular Theory & Properties of Gases

The kinetic molecular theory explains the behavior of gases based on the motion of their particles. Gas particles are in constant, random, straight-line motion, and the speed of these particles increases with temperature. Gases have low densities and are highly compressible due to the large distances between particles compared to their size.

  • Particle Motion: Gas particles move rapidly and independently, colliding elastically with each other and the walls of their container.

  • Temperature and Speed: Higher temperature means faster particle motion.

  • Density and Compressibility: Gases are much less dense and more compressible than liquids or solids.

  • Temperature Scale: All gas law calculations require temperature in Kelvin to avoid negative values and division by zero. Conversion:

Pressure Units & Dalton's Law of Partial Pressures

Pressure is the force exerted by gas particles colliding with the walls of their container. It can be measured in several units, and conversions between these units are essential for problem-solving.

  • Pressure Units: 1 atm = 760 torr = 760 mmHg = 101.325 kPa

  • Unit Conversions: Use dimensional analysis to convert between units.

  • Dalton's Law: The total pressure of a gas mixture equals the sum of the partial pressures of each component:

  • Partial Pressures: Convert all pressures to the same unit before adding.

Individual & Combined Gas Laws

Gas laws describe the relationships between pressure (P), volume (V), temperature (T), and amount (n) of a gas. Each law holds certain variables constant while relating others.

  • Boyle's Law (P and V, n and T constant): Pressure and volume are inversely related.

  • Charles's Law (V and T, n and P constant): Volume and temperature (in Kelvin) are directly related.

  • Gay-Lussac's Law (P and T, n and V constant): Pressure and temperature (in Kelvin) are directly related.

  • Avogadro's Law (V and n, P and T constant): Volume is directly proportional to the number of moles.

  • Combined Gas Law: Relates P, V, and T when all change.

  • Molar Volume at STP: At standard temperature and pressure (0 °C, 1 atm), 1 mole of an ideal gas occupies 22.4 L.

Solutions, Solubility, and Concentration

Solution Components & Dissolving Process

A solution consists of a solute (substance in smaller amount) dissolved in a solvent (substance in larger amount). The dissolving process depends on the polarity of the substances involved.

  • Solute vs. Solvent: The solvent is present in greater quantity; the solute is dissolved in the solvent.

  • Polarity: "Like dissolves like"—polar solvents dissolve polar or ionic solutes; nonpolar solvents dissolve nonpolar solutes.

  • Hydration of Ions: In water, cations are attracted to the partial negative oxygen, and anions to the partial positive hydrogens.

Solubility, Saturation, and Electrolytes

Solubility describes how much solute can dissolve in a solvent at a given temperature. Solutions can be unsaturated, saturated, or supersaturated. Electrolytes are substances that conduct electricity in solution.

  • Saturation Levels:

    • Unsaturated: Less than the maximum solute dissolved.

    • Saturated: Maximum solute dissolved; excess remains undissolved.

    • Supersaturated: More than the maximum dissolved (unstable).

  • Temperature & Pressure Effects:

    • Solubility of solids generally increases with temperature.

    • Solubility of gases decreases with temperature but increases with pressure (Henry's Law).

    • Henry's Law: (C = solubility, k = constant, P = pressure)

  • Electrolytes:

    • Strong electrolytes: Completely ionize (e.g., NaCl, HCl).

    • Weak electrolytes: Partially ionize (e.g., acetic acid).

    • Nonelectrolytes: Do not ionize (e.g., sugar).

  • Equivalents (Eq): 1 mole of an ion with charge n± equals n equivalents. Example: 1 mole Ca2+ = 2 Eq.

Concentration & Dilution Calculations

Concentration expresses the amount of solute in a given amount of solution. Common units include mass percent, mass/volume percent, and molarity. Dilution involves reducing concentration by adding more solvent.

  • Mass Percent (m/m):

  • Mass/Volume Percent (m/v):

  • Molarity (M):

  • Dilution Equation:

Osmosis and Tonicity

Osmotic Flow & Tonicity

Osmosis is the movement of water across a semipermeable membrane from lower to higher solute concentration. Tonicity describes the relative solute concentrations of two solutions separated by such a membrane.

  • Osmosis: Water moves to equalize solute concentrations.

  • Osmotic Pressure: Higher solute concentration means higher osmotic pressure.

  • Isotonic Solution: Same solute concentration as cells (e.g., 0.9% NaCl, 5% glucose); no net water movement.

  • Hypotonic Solution: Lower solute concentration than cells; water enters cells, causing hemolysis (rupture).

  • Hypertonic Solution: Higher solute concentration than cells; water leaves cells, causing crenation (shrinking).

Chemical Equilibrium & Le Chatelier's Principle

Dynamic Equilibrium & Le Chatelier's Principle

Chemical equilibrium is reached when the rates of the forward and reverse reactions are equal, resulting in constant concentrations of reactants and products. Le Chatelier's Principle predicts how a system at equilibrium responds to disturbances.

  • Equilibrium: No net change in concentrations; forward and reverse rates are equal.

  • Le Chatelier's Principle: If a system at equilibrium is disturbed (by changing concentration, pressure, or temperature), it will shift to counteract the disturbance.

  • Concentration Shifts: Adding reactant shifts equilibrium toward products; removing product does the same.

Acids, Bases, pH, and Buffers

Acid-Base Definitions & Conjugate Pairs

The Brønsted-Lowry theory defines acids as proton (H+) donors and bases as proton acceptors. Each acid-base reaction involves conjugate acid-base pairs.

  • Brønsted-Lowry Acid: Donates H+.

  • Brønsted-Lowry Base: Accepts H+.

  • Conjugate Acid: Formed by adding H+ to a base.

  • Conjugate Base: Formed by removing H+ from an acid.

Strong vs. Weak Acids and Bases

Acids and bases are classified as strong or weak based on their degree of ionization in water. Strong acids and bases ionize completely, while weak ones do so only partially.

  • Strong Acids: HCl, HBr, HI, HNO3, H2SO4, HClO4

  • Strong Bases: Group 1A and heavy Group 2A hydroxides (e.g., NaOH, KOH, Ca(OH)2)

  • Weak Acids: Acetic acid (HC2H3O2), HF, H2CO3

  • Weak Bases: NH3

  • Particle Diagrams: Strong acids/bases show only ions; weak acids/bases show mostly intact molecules.

The pH Scale & Acid-Base Reactions

pH measures the acidity or basicity of a solution, based on the concentration of hydronium ions ([H3O+]). Acid-base reactions include neutralization and reactions with carbonates.

  • pH Scale:

  • Acidic Solution: [H3O+] > [OH-], pH < 7

  • Neutral Solution: [H3O+] = [OH-], pH = 7

  • Basic Solution: [OH-] > [H3O+], pH > 7

  • Neutralization: Acid + base → salt + water

  • Acid-Carbonate Reaction: Acid + carbonate → salt + H2O + CO2

Buffers

A buffer is a solution that resists changes in pH when small amounts of acid or base are added. Buffers are made from a weak acid and its conjugate base (or a weak base and its conjugate acid).

  • Buffer Composition: Weak acid + conjugate base salt (e.g., HF and NaF)

  • Function: Maintains pH stability in biological and chemical systems.

  • Not Buffers: Strong acid/base pairs or unrelated salts (e.g., HCl + NaCl, KOH + KBr) do not form buffers.

Key Formulas & Constants

  • Combined Gas Law:

  • Pressure Conversions: 1 atm = 760 torr = 760 mmHg = 101.325 kPa

  • STP: 0 °C (273 K), 1 atm; 1 mol gas = 22.4 L at STP

  • Dilution Equation:

  • Mass Percent:

  • Mass/Volume Percent:

  • Temperature Conversion:

Practice Problem Examples

  • Pressure Conversion: Convert 0.945 atm to torr and kPa.

  • Dalton's Law: Add partial pressures (convert to same unit first) to find total pressure.

  • Boyle's Law: ; solve for new volume or pressure after a change.

  • Charles's Law: ; use Kelvin temperatures.

  • Combined Gas Law: ; solve for unknown variable.

  • STP Molar Volume:

  • Mass Percent:

  • Dilution: ; ;

  • Osmosis & Tonicity: 0.2% NaCl is hypotonic to red blood cells (0.9% NaCl); water enters cell, causing hemolysis.

  • Le Chatelier's Principle: For , adding H2 shifts right (toward products); removing NH3 also shifts right.

  • Brønsted-Lowry & Conjugates: In , NH3 is the base, H2O is the acid. The conjugate acid of HPO42- is H2PO4-.

  • Buffers: Only a weak acid and its conjugate base (e.g., HC2H3O2 + KC2H3O2) form a buffer. Strong acid/base pairs or unrelated salts do not.

Summary Table: Solution Types and Tonicity

Solution Type

Relative Solute Concentration

Effect on Red Blood Cells

Isotonic

Same as cell (0.9% NaCl)

No net water movement

Hypotonic

Lower than cell

Water enters cell; hemolysis

Hypertonic

Higher than cell

Water leaves cell; crenation

Additional info:

  • For all gas law problems, always convert temperatures to Kelvin before substituting into equations.

  • When classifying electrolytes, remember that all soluble ionic compounds are strong electrolytes, while most molecular compounds are nonelectrolytes unless they are acids or bases.

  • Buffers are crucial in biological systems to maintain pH within narrow limits, such as in blood plasma.

Pearson Logo

스터디 프렙