–60 J of work are done on the gas in the process shown in FIGURE EX19.2. What is p₁ in kPa?

검증된 단계별 안내

Step 1: Analyze the graph provided. The graph shows a horizontal line from point 'i' to point 'f', indicating that the pressure (p) remains constant during the process. This is an isobaric process.

Step 2: Recall the formula for work done on a gas during an isobaric process: \( W = -p \Delta V \), where \( W \) is the work done, \( p \) is the pressure, and \( \Delta V \) is the change in volume.

Step 3: Determine \( \Delta V \) from the graph. The initial volume \( V_i \) is 100 cm³, and the final volume \( V_f \) is 300 cm³. Thus, \( \Delta V = V_f - V_i = 300 \, \text{cm}^3 - 100 \, \text{cm}^3 = 200 \, \text{cm}^3 \). Convert this to m³: \( \Delta V = 200 \, \text{cm}^3 \times 10^{-6} \, \text{m}^3/\text{cm}^3 = 2 \times 10^{-4} \, \text{m}^3 \).

Step 4: Rearrange the formula \( W = -p \Delta V \) to solve for \( p \): \( p = -\frac{W}{\Delta V} \). Substitute \( W = -60 \, \text{J} \) and \( \Delta V = 2 \times 10^{-4} \, \text{m}^3 \) into the equation.

Step 5: Perform the calculation to find \( p \) in Pascals, then convert to kilopascals (kPa) by dividing by 1000. This will give the value of \( p_1 \), which is the constant pressure during the process.

비슷한 문제에 대한 검증된 영상 답변:

이 영상 해법은 위 문제에 도움이 된다고 튜터들이 추천한 것입니다.

주요 개념

질문에 올바르게 답하기 위해 반드시 이해해야 하는 핵심 개념들은 다음과 같습니다.

Work Done on a Gas

Work done on a gas during a thermodynamic process is defined as the energy transferred to the gas when it is compressed or expanded. In this context, the work done is negative when the gas is compressed, indicating that energy is being added to the system. The relationship between work, pressure, and volume change is crucial for understanding how the gas behaves under different conditions.

Pressure-Volume Relationship

The pressure-volume (P-V) relationship is a fundamental concept in thermodynamics that describes how the pressure of a gas changes with its volume. In a P-V diagram, a horizontal line indicates constant pressure, while a vertical line indicates constant volume. Understanding this relationship helps in analyzing processes such as isothermal and adiabatic changes, which are essential for solving problems involving gases.

Units of Pressure

Pressure is defined as force per unit area and is commonly measured in pascals (Pa) or kilopascals (kPa). In this problem, the pressure p₁ is expressed in kPa, which is a convenient unit for dealing with gas pressures in many practical applications. Recognizing how to convert between different pressure units and understanding their significance in thermodynamic equations is vital for accurate calculations.