Q: Which equation correctly defines the torque $$\vec{\tau}$$ produced by a force $$\vec{F}$$ applied at a position vector $$\vec{r}$$ from the axis of rotation?

$$\vec{\tau} = \vec{r} \times \vec{F}$$

Q: Which of the following is a necessary condition for an object to be in equilibrium?

$$\sum \vec{F} = 0$$ and $$\sum \vec{\tau} = 0$$

Q: Which equation represents the angular momentum $$\vec{L} of a $$particle about a point $$O$$?

$$\vec{L} = \vec{r} \times \vec{p}$$

Q: If a system is in equilibrium, which of the following must be true for the sum of the forces and torques?

$$\sum \vec{F} = 0$$ and $$\sum \vec{\tau} = 0$$

Question 1

Which equation correctly defines the torque $$\vec{	au}$$ produced by a force $$\vec{F}$$ applied at a position vector $$\vec{r}$$ from the axis of rotation?

Accepted Answer

$$\vec{	au} = \vec{r} 	imes \vec{F}$$

Question 2

A uniform horizontal beam is supported at both ends and has a heavy object placed one third of the way from the left end. If the object weighs 20 N, what is the upward force provided by the left support?

Accepted Answer

$$6.7\ \mathrm{N}$$

Question 3

Which of the following is a necessary condition for an object to be in equilibrium?

Accepted Answer

$$\sum \vec{F} = 0$$ and $$\sum \vec{	au} = 0$$

Question 4

A ladder of mass $$m$$ leans against a smooth wall at an angle $$	heta$$ with the ground. Which force diagram correctly represents the forces acting on the ladder?

Accepted Answer

Gravity acts downward at the center, normal force from the ground acts upward, and the wall exerts a horizontal force at the top.

Question 5

If the net force on an object is zero but the net torque is not zero, what will happen to the object?

Accepted Answer

It will rotate but not translate.

Question 6

Which of the following best describes the stability of an object whose center of gravity is outside its base of support?

Accepted Answer

The object is in unstable equilibrium and will tip over.

Question 7

A person carrying a heavy load adjusts their posture so that their center of mass is over their feet. What is the primary reason for this adjustment?

Accepted Answer

To maintain stable equilibrium and prevent tipping.

Question 8

A horizontal beam experiences both tensile and compressive stresses due to its own weight. What property must the material of the beam possess to avoid fracture?

Accepted Answer

High strength under both tension and compression.

Question 9

Which type of bridge is best suited for spanning very large distances, as seen in the image of the Golden Gate Bridge?

Accepted Answer

Suspension bridge

Question 10

In a statics problem, if the calculated force comes out negative, what does this indicate?

Accepted Answer

The force acts in the opposite direction to the one chosen in the coordinate system.

Question 11

Which equation represents the angular momentum $$\vec{L} of a $$particle about a point $$O$$?

Accepted Answer

$$\vec{L} = \vec{r} 	imes \vec{p}$$

Question 12

If a system is in equilibrium, which of the following must be true for the sum of the forces and torques?

Accepted Answer

$$\sum \vec{F} = 0$$ and $$\sum \vec{	au} = 0$$

Question 13

Which of the following structures is primarily strengthened by compression forces?

Accepted Answer

Arches and domes

Question 14

A gyroscope maintains its orientation due to conservation of which physical quantity?

Accepted Answer

Angular momentum

Question 15

Which of the following is the most effective strategy when solving statics problems involving multiple forces?

Accepted Answer

Draw a free-body diagram and resolve all forces into components.

Question 16

If a beam is supported at both ends and a load is placed closer to one end, how does the force at that end compare to the force at the other end?

Accepted Answer

The force at the closer end is greater than at the farther end.

Question 17

Which of the following best describes the role of elasticity and strength in the stability of structures?

Accepted Answer

They determine how well a structure can withstand forces without deforming or breaking.

Question 18

Which of the following is true about the choice of axis for torque calculations in statics problems?

Accepted Answer

Choosing an axis where unknown forces act can simplify the problem by eliminating those forces from the torque equation.

Question 19

Which of the following is a real-world consequence of improper posture when carrying heavy loads?

Accepted Answer

Increased risk of injury due to excessive distortion of the body.

Statics, Torque, and Structural Stability: Study Notes

스터디 가이드 - 연습 문제

학습 가이드 - 플래시카드