(II) (a) Suppose for a conventional X-ray image that the X-ray beam consists of parallel rays. What would be the magnification of the image? (b) Suppose, instead, that the X-rays come from a point source (as in Fig. 35–31) that is 15 cm in front of a human body which is 25 cm thick, and the film is pressed against the person’s back. Determine and discuss the range of magnifications that result.


<IMAGE>

A diffraction grating has 15,000 rulings in its 1.9 cm width. Determine (a) its resolving power in first and second orders, and (b) the minimum wavelength resolution (∆λ) it can yield for λ = 410 nm.

(II) White light passes through a 640-slit/ mm diffraction grating. First-order and second-order visible spectra (“rainbows”) appear on the wall 32 cm away as shown in Fig. 35–40. Determine the widths ℓ₁ and ℓ₂ of the two “rainbows” (400 nm to 700 nm). In which order is the “rainbow” dispersed over a larger distance?

What is the highest spectral order that can be seen if a grating with 6800 slits per cm is illuminated with 633-nm laser light? Assume normal incidence.

(II) X-rays of wavelength 0.138 nm fall on a crystal whose atoms, lying in planes, are spaced 0.315 nm apart. At what angle Φ (relative to the surface, Fig. 35–28) must the X-rays be directed if the first diffraction maximum is to be observed?

You want to design a spy satellite to photograph license plate numbers. Assuming it is necessary to resolve points separated by 2 cm with 550-nm light, and that the satellite orbits at a height of 130 km, what minimum lens aperture (diameter) is required?

X-rays of wavelength 0.10 nm fall on a microcrystalline powder sample. The sample is located 15 cm from a photographic sensor. The crystal structure of the sample has an atomic spacing of 0.22 nm. Calculate the radii of the diffraction rings corresponding to first- and second-order scattering. Note in Fig. 35–28 that the X-ray beam is deflected through an angle 2Φ.