Light Bulbs in Series and in Parallel. Two light bulbs have constant resistances of 400Ω and 800Ω. If the two light bulbs are connected in series across a 120 V line, find the total power dissipated in both bulbs.

검증된 단계별 안내

First, understand that when resistors (or light bulbs in this case) are connected in series, the total resistance \( R_{\text{total}} \) is the sum of the individual resistances. So, calculate the total resistance: \( R_{\text{total}} = R_1 + R_2 = 400\,\Omega + 800\,\Omega \).

Next, use Ohm's Law to find the total current \( I \) flowing through the circuit. Ohm's Law states \( V = IR \), where \( V \) is the voltage, \( I \) is the current, and \( R \) is the resistance. Rearrange this to find \( I = \frac{V}{R_{\text{total}}} \), where \( V = 120\,\text{V} \).

Now, calculate the total power dissipated in the circuit using the formula for power: \( P = IV \). Substitute the current \( I \) you found in the previous step and the total voltage \( V = 120\,\text{V} \) into this formula.

Alternatively, you can use the formula \( P = I^2R_{\text{total}} \) to find the total power dissipated, where \( I \) is the current calculated earlier and \( R_{\text{total}} \) is the total resistance.

Finally, verify your calculations by ensuring that the power calculated using both methods (\( P = IV \) and \( P = I^2R_{\text{total}} \)) are consistent, which confirms the accuracy of your solution.

비슷한 문제에 대한 검증된 영상 답변:

이 영상 해법은 위 문제에 도움이 된다고 튜터들이 추천한 것입니다.

영상 길이:

도움이 되었나요?

주요 개념

질문에 올바르게 답하기 위해 반드시 이해해야 하는 핵심 개념들은 다음과 같습니다.

Ohm's Law

Ohm's Law states that the current through a conductor between two points is directly proportional to the voltage across the two points, and inversely proportional to the resistance. It is expressed as V = IR, where V is voltage, I is current, and R is resistance. This law is fundamental for calculating the current in circuits with known voltage and resistance.

Series Circuit

In a series circuit, components are connected end-to-end, so the same current flows through each component. The total resistance in a series circuit is the sum of individual resistances. This concept is crucial for determining the equivalent resistance and current in the circuit, which are necessary for calculating power dissipation.

Power Dissipation in Resistors

Power dissipation in resistors is calculated using the formula P = I^2R, where P is power, I is current, and R is resistance. Alternatively, it can be calculated using P = V^2/R when voltage and resistance are known. Understanding this concept allows us to determine how much electrical energy is converted into heat in resistors, which is essential for finding the total power dissipated in the circuit.