Skip to main content
Ch. 6 - Applications of Integration
Briggs - Calculus: Early Transcendentals 3rd Edition
Briggs3rd EditionCalculus: Early TranscendentalsISBN: 9780136847243Non è quello che usi tu?Cambia libro di testo
Capitolo 6, Problema 6.R.76

Lifting problem A 4-kg mass is attached to the bottom of a 5-m, 15-kg chain. If the chain hangs from a platform, how much work is required to pull the chain and the mass onto the platform?

Guida verificata passo dopo passo
1
Identify the physical setup: a 5-meter chain with mass 15 kg hangs from a platform, and a 4-kg mass is attached at the bottom. We want to find the work done to pull both the chain and the mass up onto the platform.
Calculate the weight per unit length of the chain. Since the chain has mass 15 kg and length 5 m, the linear mass density is \(\lambda = \frac{15}{5} = 3\) kg/m. The weight per unit length is then \(w = \lambda g = 3g\) N/m, where \(g\) is the acceleration due to gravity.
Set up the integral for the work done to lift the chain. Consider a small segment of the chain at a distance \(x\) meters from the bottom (where \(x\) ranges from 0 to 5). The length of chain to be lifted from this segment is \(x\) meters, so the work to lift this segment is \(dW = (\text{weight of segment}) \times (\text{distance lifted})\).
Express the work to lift the chain segment as \(dW = (w \, dx) \times x = 3g x \, dx\). Integrate this expression from \(x=0\) to \(x=5\) to find the total work to lift the entire chain.
Calculate the work to lift the 4-kg mass from the bottom to the platform, which is a distance of 5 meters. The work is \(W_{mass} = mg \times 5 = 4g \times 5\). Add this to the work done lifting the chain to get the total work required.

Risposta video verificata per un problema simile:

Questa soluzione video è stata consigliata dai nostri tutor come utile per risolvere questo problema.
Durata del video:
4m

Concetti chiave

Ecco i concetti essenziali che devi comprendere per rispondere correttamente alla domanda.

Work Done by a Variable Force

Work is the integral of force over distance. When lifting a chain, the force varies because the weight of the portion lifted changes as more chain is pulled up. Calculating work requires integrating the weight of the chain segment being lifted over the height it is moved.
Video consigliato:
Percorso guidato
05:40
Work Done On A Spring (Hooke's Law)

Weight and Mass Relationship

Weight is the force due to gravity acting on a mass, calculated as mass times gravitational acceleration (W = mg). For the chain and the mass, their weights must be considered separately and combined to find the total force during lifting.
Video consigliato:
Percorso guidato
09:32
Lifting Problems

Setting up the Integral for Work

To find the total work, set up an integral that sums the incremental work done lifting each small segment of the chain plus the constant work to lift the mass. This involves expressing the force as a function of the height lifted and integrating over the chain length.
Video consigliato:
Percorso guidato
06:22
Introduction To Work
Pratica correlata
Domanda del libro di testo

43–55. Volumes of solids Choose the general slicing method, the disk/washer method, or the shell method to answer the following questions.


The region bounded by the curve y = 1+√x, the curve y = 1−√x, and the line x=1 is revolved about the y-axis. Find the volume of the resulting solid by (a) integrating with respect to x and (b) integrating with respect to y. Be sure your answers agree.

39
views
Domanda del libro di testo

Two methods The region R in the first quadrant bounded by the parabola y = 4-x² and coordinate axes is revolved about the y-axis to produce a dome-shaped solid. Find the volume of the solid in the following ways:


a. Apply the disk method and integrate with respect to y.

97
views
Domanda del libro di testo

Pumping water A water tank has the shape of a box that is 2 m wide, 4 m long, and 6 m high.


b. If the water in the tank is 2 m deep, how much work is required to pump the water to a level of 1 m above the top of the tank?

47
views
Domanda del libro di testo

43–55. Volumes of solids Choose the general slicing method, the disk/washer method, or the shell method to answer the following questions.


The region bounded by the graphs of y = 2x,y = 6−x, and y = 0 is revolved about the line y = −2 and the line x = −2. Find the volumes of the resulting solids. Which one is greater?

79
views
Domanda del libro di testo

An oscillator The acceleration of an object moving along a line is given by a(t) = 2 sin πt/4. The initial velocity and position are v(0)= −8/π and s(0)=0.

 a. Find the velocity and position for t≥0.

22
views
Domanda del libro di testo

58–61. Arc length Find the length of the following curves.

y = x³/6 + 1/2x on [1,2]

77
views