Skip to main content
Ch. 30 - Inductance, Electromagnetic Oscillations, and AC Circuits
Giancoli Douglas - Physics for Scientists and Engineers 5th edition
Giancoli Douglas5th editionPhysics for Scientists and EngineersISBN: 9780137488179Non è quello che usi tu?Cambia libro di testo
Capitolo 29, Problema 65

The output of an electrocardiogram amplifier has an impedance of 45 Ω. It is to be connected to an 8.0-Ω loudspeaker through a transformer. What should be the turns ratio of the transformer?

Guida verificata passo dopo passo
1
Step 1: Understand the problem. The goal is to find the turns ratio of a transformer that connects an amplifier with an impedance of 45 Ω to a loudspeaker with an impedance of 8.0 Ω. The transformer is used to match the impedances for efficient power transfer.
Step 2: Recall the formula for impedance transformation in a transformer. The relationship between the primary impedance \( Z_p \) and the secondary impedance \( Z_s \) is given by: \( \frac{Z_p}{Z_s} = \left( \frac{N_p}{N_s} \right)^2 \), where \( N_p \) and \( N_s \) are the number of turns in the primary and secondary coils, respectively.
Step 3: Rearrange the formula to solve for the turns ratio \( \frac{N_p}{N_s} \): \( \frac{N_p}{N_s} = \sqrt{\frac{Z_p}{Z_s}} \).
Step 4: Substitute the given values into the formula. Here, \( Z_p = 45 \; \Omega \) and \( Z_s = 8.0 \; \Omega \). The turns ratio becomes \( \frac{N_p}{N_s} = \sqrt{\frac{45}{8.0}} \).
Step 5: Simplify the expression under the square root to find the numerical value of the turns ratio. This will give the ratio of the number of turns in the primary coil to the number of turns in the secondary coil.

Risposta video verificata per un problema simile:

Questa soluzione video è stata consigliata dai nostri tutor come utile per risolvere questo problema.
Durata del video:
2m

Concetti chiave

Ecco i concetti essenziali che devi comprendere per rispondere correttamente alla domanda.

Impedance Matching

Impedance matching is the process of making the output impedance of one device equal to the input impedance of another to maximize power transfer and minimize signal reflection. In this scenario, the electrocardiogram amplifier has an output impedance of 45 Ω, and it needs to be matched with the 8.0-Ω loudspeaker to ensure efficient energy transfer.
Video consigliato:
Percorso guidato
08:40
Impedance in AC Circuits

Transformer Turns Ratio

The turns ratio of a transformer is the ratio of the number of turns in the primary coil to the number of turns in the secondary coil. This ratio determines how voltage and current are transformed between the primary and secondary sides. In this case, the turns ratio will be crucial for converting the 45 Ω impedance of the amplifier to match the 8.0 Ω impedance of the loudspeaker.
Video consigliato:

Impedance Transformation

Impedance transformation refers to the ability of a transformer to change the impedance seen by the source and load. The relationship between the primary and secondary impedances is given by the square of the turns ratio. To find the appropriate turns ratio for the transformer, one can use the formula: Zs = (Np/Ns)² * Zp, where Zs is the secondary impedance, Zp is the primary impedance, and Np and Ns are the number of turns in the primary and secondary coils, respectively.
Video consigliato:
Pratica correlata
Domanda del libro di testo

The frequency of the ac voltage source (peak voltage Vo) in an LRC circuit is tuned to the circuit’s resonant frequency f₀ = 1 / (2π√LC). (a) Show that the peak voltage across the capacitor is Vco = VoTo/ (2πτ), where To ( =1/fo) is the period of the resonant frequency and τ = RC is the time constant for charging the capacitor C through a resistor R. (b) Define β = To/ (2πτ) so that Vco = βVo. Then β is the “amplification” of the source voltage across the capacitor. If a particular LRC circuit contains a 2.0-nF capacitor and has a resonant frequency of 5.0 kHz, what value of R will yield β = 125?

1375
views
Domanda del libro di testo

(II) (a) Show that oscillation of charge Q on the capacitor of an LRC circuit has amplitude


Q0=V0(ωR)2+(ω2L−1C)2.Q_0 = \(\frac{V_0}{\sqrt{(\omega R)^2 + \left(\omega^2 L - \frac{1}{C}\)\(\right\))^2}}.

1523
views
Domanda del libro di testo

At t = 0, the current through a 60.0-mH inductor is 50.0 mA and is increasing at the rate of 78.0 mA/s. What is the initial energy stored in the inductor, and how long does it take for the energy to increase by a factor of 8.0 from the initial value?

1008
views
Domanda del libro di testo

At time t = 0, the switch in the circuit shown in Fig. 30–30 is closed. After a sufficiently long time, steady currents I₁, I₂, and I₃ flow through resistors R₁, R₂, and R₃, respectively. Determine these three currents.

973
views
Domanda del libro di testo

An average power output of 150 W is sent into a 4-Ω loudspeaker (see Fig. 25–14). What are the rms voltage and the rms current fed to the speaker at 1.0 W when the volume is turned down?

1468
views
Domanda del libro di testo

Show that the power delivered by a three-phase ac source equals a constant P = 3Vo²/2R, by combining the four equations in Section 30–11.

1358
views