Skip to main content
Ch 14: Fluids and Elasticity
Knight Calc - Physics for Scientists and Engineers 5th Edition
Knight Calc5th EditionPhysics for Scientists and EngineersISBN: 9780137344796Non è quello che usi tu?Cambia libro di testo
Tutti i libri di testoKnight Calc 5th EditionCh 14: Fluids and ElasticityProblema 58
Capitolo 14, Problema 58

A tree loses water to the air by the process of transpiration at the rate of 110 g/h. This water is replaced by the upward flow of sap through vessels in the trunk. If the trunk contains 2000 vessels, each 100 μm in diameter, what is the upward speed in mm/s of the sap in each vessel? The density of tree sap is 1040 kg/m³.

Guida verificata passo dopo passo
1
Step 1: Convert the rate of water loss from grams per hour (g/h) to kilograms per second (kg/s). Since 1 gram = 0.001 kilograms and 1 hour = 3600 seconds, use the conversion factor to calculate the mass flow rate in kg/s.
Step 2: Calculate the volumetric flow rate of sap in m³/s using the formula \( Q = \frac{\text{mass flow rate}}{\text{density}} \), where the density of sap is given as 1040 kg/m³.
Step 3: Determine the cross-sectional area of a single vessel using the formula \( A = \pi r^2 \), where \( r \) is the radius of the vessel. The diameter is given as 100 μm, so the radius is half of that (50 μm or 50 × 10⁻⁶ m).
Step 4: Calculate the total cross-sectional area of all 2000 vessels by multiplying the area of one vessel by the number of vessels.
Step 5: Find the upward speed of sap in each vessel using the formula \( v = \frac{Q}{A_{\text{total}}} \), where \( Q \) is the volumetric flow rate and \( A_{\text{total}} \) is the total cross-sectional area. Convert the speed from m/s to mm/s by multiplying by 1000.

Risposta video verificata per un problema simile:

Questa soluzione video è stata consigliata dai nostri tutor come utile per risolvere questo problema.
Durata del video:
9m

Concetti chiave

Ecco i concetti essenziali che devi comprendere per rispondere correttamente alla domanda.

Transpiration

Transpiration is the process by which water vapor is released from plant leaves into the atmosphere. It plays a crucial role in the water cycle and helps in nutrient transport within the plant. The rate of transpiration can be influenced by environmental factors such as temperature, humidity, and wind speed.
Video consigliato:
Percorso guidato
05:51
Refraction at Spherical Surfaces

Fluid Dynamics

Fluid dynamics is the study of the behavior of fluids (liquids and gases) in motion. In this context, it helps us understand how sap moves through the vessels in the tree trunk. The principles of fluid dynamics, including flow rate and cross-sectional area, are essential for calculating the speed of sap in the vessels.
Video consigliato:
Percorso guidato
08:12
Torque & Acceleration (Rotational Dynamics)

Cross-sectional Area

The cross-sectional area of a vessel is the area of a slice taken perpendicular to the flow direction. It is crucial for determining the flow rate of sap in the vessels. For circular vessels, the area can be calculated using the formula A = π(d/2)², where d is the diameter. This area directly affects the speed of the fluid moving through the vessel.
Video consigliato:
Percorso guidato
08:10
Calculating the Vector (Cross) Product Using Components
Pratica correlata
Domanda del libro di testo

Water from a vertical pipe emerges as a 10-cm-diameter cylinder and falls straight down 7.5 m into a bucket. The water exits the pipe with a speed of 2.0 m/s. What is the diameter of the column of water as it hits the bucket?

2002
views
Domanda del libro di testo

Air flows through the tube shown in FIGURE P14.62 at a rate of 1200 cm³/s. Assume that air is an ideal fluid. What is the height h of mercury in the right side of the U-tube?

2523
views
1
rank
Domanda del libro di testo

A pressure gauge reads 50 kPa as water flows at 10.0 m/s through a 16.8-cm-diameter horizontal pipe. What is the reading of a pressure gauge after the pipe has expanded to 20.0 cm in diameter?

2094
views
Domanda del libro di testo

A nonviscous liquid of density p flows at speed v₀ through a horizontal pipe that expands smoothly from diameter d₀ to a larger diameter d₁. The pressure in the narrower section is p₀. Find an expression for the pressure p₁ in the wider section.

1867
views
Domanda del libro di testo

A nuclear power plant draws 3.0 x 106 L/min of cooling water from the ocean. If the water is drawn in through two parallel, 3.0-m-diameter pipes, what is the water speed in each pipe?

1498
views
Domanda del libro di testo

A hurricane wind blows across a 6.0 m x 15.0 m flat roof at a speed of 130 km/h. What is the pressure difference?

2214
views
1
rank