Ch 32: AC Circuits

Knight Calc - Physics for Scientists and Engineers 5th Edition

Knight Calc5th EditionPhysics for Scientists and EngineersISBN: 9780137344796Non è quello che usi tu?Cambia libro di testo

Knight Calc 5th Edition

Ch 32: AC Circuits

Problema 19a

Capitolo 32, Problema 19a

What are V_R and V_C if the emf frequency in FIGURE EX32.19 is 2.5 kHz?

Guida verificata passo dopo passo

Step 1: Identify the components in the circuit from FIGURE EX32.19. Typically, this involves a resistor (R), a capacitor (C), and an alternating current (AC) source with a given frequency. The problem asks for the voltage across the resistor (Vᵣ) and the capacitor (Vc).

Step 2: Recall the formulas for the impedance of the resistor and capacitor in an AC circuit. The impedance of the resistor is simply R, while the impedance of the capacitor is given by \( Z_c = \frac{1}{\omega C} \), where \( \omega = 2 \pi f \) is the angular frequency and \( f \) is the frequency of the AC source.

Step 3: Calculate the angular frequency \( \omega \) using \( \omega = 2 \pi f \). Substitute \( f = 2.5 \text{ kHz} \) into the formula to find \( \omega \).

Step 4: Use Ohm's Law and the concept of voltage division in AC circuits to find the voltages across the resistor and capacitor. The voltage across the resistor \( Vᵣ \) is given by \( Vᵣ = I R \), and the voltage across the capacitor \( V_c \) is given by \( V_c = I Z_c \), where \( I \) is the current in the circuit. The current can be determined using the total impedance of the circuit.

Step 5: Combine the results to express \( Vᵣ \) and \( V_c \) in terms of the given values (R, C, f, and the emf of the AC source). Ensure that the calculations are consistent with the circuit configuration provided in FIGURE EX32.19.

Risposta video verificata per un problema simile:

Questa soluzione video è stata consigliata dai nostri tutor come utile per risolvere questo problema.

Concetti chiave

Ecco i concetti essenziali che devi comprendere per rispondere correttamente alla domanda.

Electromotive Force (emf)

Electromotive force (emf) is the voltage generated by a source such as a battery or generator when no current is flowing. It represents the energy per unit charge produced by the source and is crucial for understanding how electrical circuits operate. In the context of alternating current (AC) circuits, the emf can vary with frequency, affecting the behavior of circuit components.

Video consigliato:

Percorso guidato

09:57

Motional EMF

Resonant Frequency (Vᵣ)

Resonant frequency (Vᵣ) is the frequency at which a system naturally oscillates when not subjected to a continuous external force. In electrical circuits, this occurs when the inductive and capacitive reactances are equal, leading to maximum voltage and current at that frequency. Understanding resonant frequency is essential for analyzing circuits that include inductors and capacitors.

Video consigliato:

Percorso guidato

05:23

Resonance in Series LRC Circuits

Capacitive Voltage (Vc)

Capacitive voltage (Vc) refers to the voltage across a capacitor in an AC circuit. It is influenced by the frequency of the applied emf and the capacitance value. As frequency increases, the capacitive reactance decreases, allowing more current to flow through the capacitor, which in turn affects the overall voltage distribution in the circuit.

Video consigliato:

Percorso guidato

08:02

Capacitors & Capacitance (Intro)

Pratica correlata

Domanda del libro di testo

The peak current through an inductor is 10 mA. What is the peak current if the emf peak voltage is doubled (at the original frequency)?