Ch 09: Work and Kinetic Energy

Knight Calc - Physics for Scientists and Engineers 5th Edition

Knight Calc5th EditionPhysics for Scientists and EngineersISBN: 9780137344796당신이 사용하는 게 아니라요?교과서 변경

Knight Calc 5th Edition

Ch 09: Work and Kinetic Energy

문제 50b

9장, 문제 50b

A 737-800 jet airliner has twin engines, each with 105 kN thrust. A 78,000 kg jet reaches a takeoff speed of 70 m/s in a distance of 1100 m. What is the increase in thermal energy due to rolling friction and air drag?

검증된 단계별 안내

Identify the work-energy principle: The work done by all forces acting on the jet is equal to the change in its kinetic energy plus the energy lost to friction and air drag. The equation is: \( W_{net} = \Delta KE + E_{thermal} \).

Calculate the change in kinetic energy (\( \Delta KE \)) of the jet: \( \Delta KE = \frac{1}{2} m v^2 - \frac{1}{2} m u^2 \), where \( m \) is the mass of the jet (78,000 kg), \( v \) is the final velocity (70 m/s), and \( u \) is the initial velocity (0 m/s).

Determine the total work done by the engines: \( W_{engines} = F_{thrust} \cdot d \), where \( F_{thrust} \) is the total thrust from both engines (\( 2 \cdot 105 \ \text{kN} = 210 \ \text{kN} \)) and \( d \) is the distance over which the force is applied (1100 m).

Relate the work-energy principle to find the thermal energy: Rearrange the equation \( W_{net} = \Delta KE + E_{thermal} \) to solve for \( E_{thermal} \): \( E_{thermal} = W_{engines} - \Delta KE \).

Substitute the values for \( W_{engines} \) and \( \Delta KE \) into the equation for \( E_{thermal} \) to calculate the increase in thermal energy due to rolling friction and air drag.

비슷한 문제에 대한 검증된 영상 답변:

이 영상 해법은 위 문제에 도움이 된다고 튜터들이 추천한 것입니다.

영상 길이:

도움이 되었나요?

주요 개념

질문에 올바르게 답하기 위해 반드시 이해해야 하는 핵심 개념들은 다음과 같습니다.

Thrust and Drag Forces

Thrust is the force produced by the engines to propel the aircraft forward, while drag is the resistance force acting opposite to the direction of motion, caused by air friction. In this scenario, the total thrust from the engines must overcome both the drag and rolling friction to achieve the required takeoff speed.

Work-Energy Principle

The work-energy principle states that the work done on an object is equal to the change in its kinetic energy. In this case, the work done by the thrust must account for the energy lost to friction and drag, as well as the energy required to accelerate the jet to its takeoff speed.

Thermal Energy and Energy Losses

Thermal energy refers to the energy generated as heat due to friction and drag forces acting on the aircraft. As the jet accelerates, some of the mechanical energy is converted into thermal energy, which can be quantified to determine the increase in thermal energy due to these resistive forces during the takeoff process.

관련 실천

교과서 질문

A 50 kg ice skater is gliding along the ice, heading due north at 4.0 m/s. The ice has a small coefficient of static friction, to prevent the skater from slipping sideways, but μ_k = 0. Suddenly, a wind from the northeast exerts a force of 4.0 N on the skater. What is the minimum value of μ_s that allows her to continue moving straight north?

642

views

교과서 질문

A ball shot straight up with kinetic energy K₀ reaches height h. What height will it reach if the initial kinetic energy is doubled?

2061

views

교과서 질문

The gravitational attraction between two objects with masses m_A and m_B, separated by distance 𝓍, is F = Gm_Am_B/𝓍², where G is the gravitational constant. If one mass is much greater than the other, the larger mass stays essentially at rest while the smaller mass moves toward it. Suppose a 1.5 x 10¹³ kg comet is passing the orbit of Mars, heading straight for the sun at a speed of 3.5 x 10⁴ m/s. What will its speed be when it crosses the orbit of Mercury? Astronomical data are given in the tables at the back of the book, and G = 6.67 x 10^-11 Nm²/kg².

2254

views

교과서 질문

A red ball has a mass of 250 g. A constant force pushes the red ball horizontally and launches it at a speed of 15 m/s. The same force pushes a green ball through the same distance, launching it at 25 m/s. What is the mass of the green ball?

2195

views

교과서 질문

A 30 g mass is attached to one end of a 10-cm-long spring. The other end of the spring is connected to a frictionless pivot on a frictionless, horizontal surface. Spinning the mass around in a circle at 90 rpm causes the spring to stretch to a length of 12 cm. What is the value of the spring constant?

2375

views

교과서 질문

A 50 kg ice skater is gliding along the ice, heading due north at 4.0 m/s. The ice has a small coefficient of static friction, to prevent the skater from slipping sideways, but μ_k = 0. Suddenly, a wind from the northeast exerts a force of 4.0 N on the skater. Use work and energy to find the skater's speed after gliding 100 m in this wind.

2734

views