Ch 14: Fluids and Elasticity

Knight Calc - Physics for Scientists and Engineers 5th Edition

Knight Calc5th EditionPhysics for Scientists and EngineersISBN: 9780137344796당신이 사용하는 게 아니라요?교과서 변경

Knight Calc 5th Edition

Ch 14: Fluids and Elasticity

문제 66

14장, 문제 66

20°C water flows through a 2.0-m-long, 6.0-mm-diameter pipe. What is the maximum flow rate in L/min for which the flow is laminar?

검증된 단계별 안내

Determine the condition for laminar flow using the Reynolds number. The flow is laminar if the Reynolds number \( Re \) is less than 2000. The Reynolds number is given by \( Re = \frac{\rho v D}{\mu} \), where \( \rho \) is the density of the fluid, \( v \) is the flow velocity, \( D \) is the diameter of the pipe, and \( \mu \) is the dynamic viscosity of the fluid.

Rearrange the Reynolds number formula to solve for the maximum velocity \( v_{\text{max}} \) that ensures laminar flow: \( v_{\text{max}} = \frac{Re \cdot \mu}{\rho \cdot D} \). Use \( Re = 2000 \) as the threshold for laminar flow.

Look up the properties of water at 20°C: the density \( \rho \) is approximately \( 998 \; \text{kg/m}^3 \), and the dynamic viscosity \( \mu \) is approximately \( 1.002 \times 10^{-3} \; \text{Pa·s} \). Substitute these values, along with the pipe diameter \( D = 6.0 \; \text{mm} = 0.006 \; \text{m} \), into the equation for \( v_{\text{max}} \).

Once \( v_{\text{max}} \) is calculated, determine the maximum volumetric flow rate \( Q_{\text{max}} \) using the formula \( Q = v \cdot A \), where \( A \) is the cross-sectional area of the pipe. The area is given by \( A = \pi \cdot \left( \frac{D}{2} \right)^2 \). Substitute \( v_{\text{max}} \) and \( A \) into the equation for \( Q \).

Convert the volumetric flow rate \( Q_{\text{max}} \) from \( \text{m}^3/\text{s} \) to \( \text{L/min} \) by multiplying by \( 1000 \; \text{L/m}^3 \) and \( 60 \; \text{s/min} \). This gives the maximum flow rate in \( \text{L/min} \) for which the flow remains laminar.

비슷한 문제에 대한 검증된 영상 답변:

이 영상 해법은 위 문제에 도움이 된다고 튜터들이 추천한 것입니다.

영상 길이:

도움이 되었나요?

주요 개념

질문에 올바르게 답하기 위해 반드시 이해해야 하는 핵심 개념들은 다음과 같습니다.

Laminar Flow

Laminar flow is a type of fluid motion characterized by smooth, parallel layers of fluid that do not mix. In this regime, the flow is orderly, and the fluid moves in straight lines, which minimizes turbulence. The flow is typically laminar when the Reynolds number, a dimensionless quantity, is less than 2000.

Reynolds Number

The Reynolds number (Re) is a dimensionless value that helps predict flow patterns in different fluid flow situations. It is calculated using the formula Re = (density × velocity × characteristic length) / viscosity. A low Reynolds number indicates laminar flow, while a high number suggests turbulent flow, making it crucial for determining the flow regime in pipes.

Flow Rate

Flow rate is the volume of fluid that passes through a given surface per unit time, commonly expressed in liters per minute (L/min). It is influenced by factors such as pipe diameter, fluid velocity, and viscosity. Understanding flow rate is essential for determining how much fluid can move through a pipe under specific conditions, particularly in assessing whether the flow remains laminar.

관련 실천

교과서 질문

The 30-cm-long left coronary artery is 4.6 mm in diameter. Blood pressure drops by 3.0 mm of mercury over this distance. What are the (a) average blood speed and (b) volume flow rate in L/min through this artery?

1697

views

교과서 질문

A water tank of height h has a small hole at height y. The water is replenished to keep h from changing. The water squirting from the hole has range 𝓍. The range approaches zero as y → 0 because the water squirts right onto the ground. The range also approaches zero as y → h because the horizontal velocity becomes zero. Thus there must be some height y between 0 and h for which the range is a maximum. Find an algebraic expression for the flow speed v with which the water exits the hole at height y.

2324

views

교과서 질문

The 1.0-m-tall cylinder shown in FIGURE CP14.71 contains air at a pressure of 1 atm. A very thin, frictionless piston of negligible mass is placed at the top of the cylinder to prevent any air from escaping, then mercury is slowly poured into the cylinder until no more can be added without the cylinder overflowing. What is the height h of the column of compressed air? Hint: Boyle's law, which you learned in chemistry, says p₁V₁ = p₂V₂ for a gas compressed at constant temperature, which we will assume to be the case.

2342

views

교과서 질문

Air flows through the tube shown in FIGURE P14.63. Assume that air is an ideal fluid. What is the volume flow rate?

20°C water flows at 1.5 m/s through a 10-m-long, 1.0-mm-diameter horizontal tube and then exits into the air. What is the gauge pressure in kPa at the point where the water enters the tube?

1908

views

교과서 질문

A cylindrical tank of radius 𝑅, filled to the top with a liquid, has a small hole in the side, of radius 𝓇, at distance d below the surface. Find an expression for the volume flow rate through the hole.

2771

views