High-frequency signals are often transmitted along a coaxial cable, such as the one shown in FIGURE P26.68. For example, the cable TV hookup coming into your home is a coaxial cable. The signal is carried on a wire of radius R1 while the outer conductor of radius R2 is grounded (i.e., at V=0 V). An insulating material fills the space between them, and an insulating plastic coating goes around the outside. Evaluate the capacitance per meter of a cable having R1=0.50 mm and R2=3.0 mm.

Ch 26: Potential and Field

Knight Calc - Physics for Scientists and Engineers 5th Edition

Knight Calc5th EditionPhysics for Scientists and EngineersISBN: 9780137344796당신이 사용하는 게 아니라요?교과서 변경

모든 교과서

Knight Calc 5th Edition

Ch 26: Potential and Field

문제 68b

26장, 문제 68b

High-frequency signals are often transmitted along a coaxial cable, such as the one shown in FIGURE P26.68. For example, the cable TV hookup coming into your home is a coaxial cable. The signal is carried on a wire of radius R₁ while the outer conductor of radius R₂ is grounded (i.e., at V=0 V). An insulating material fills the space between them, and an insulating plastic coating goes around the outside. Evaluate the capacitance per meter of a cable having R₁=0.50 mm and R₂=3.0 mm.

검증된 단계별 안내

Step 1: Recognize that the capacitance per unit length of a coaxial cable can be calculated using the formula for the capacitance of a cylindrical capacitor: \( C' = \frac{2 \pi \varepsilon}{\ln(R_2 / R_1)} \), where \( \varepsilon \) is the permittivity of the insulating material, \( R_1 \) is the radius of the inner conductor, and \( R_2 \) is the radius of the outer conductor.

Step 2: Convert the given radii \( R_1 = 0.50 \, \text{mm} \) and \( R_2 = 3.0 \, \text{mm} \) into meters for consistency in SI units. This gives \( R_1 = 0.0005 \, \text{m} \) and \( R_2 = 0.003 \, \(\text{m}\).

Step 3: Identify the permittivity \( \varepsilon \) of the insulating material. If the problem does not specify the material, assume \( \varepsilon = \varepsilon_0 \), the permittivity of free space, which is \( \varepsilon_0 = 8.85 \times 10^{-12} \, \text{F/m} \).

Step 4: Substitute the values of \( \varepsilon \), \( R_1 \), and \( R_2 \) into the formula \( C' = \frac{2 \pi \varepsilon}{\ln(R_2 / R_1)} \). Ensure that the logarithmic term \( \ln(R_2 / R_1) \) is calculated using the natural logarithm.

Step 5: Simplify the expression to find the capacitance per meter \( C' \). The result will be in units of farads per meter (F/m).

비슷한 문제에 대한 검증된 영상 답변:

이 영상 해법은 위 문제에 도움이 된다고 튜터들이 추천한 것입니다.

도움이 되었나요?

주요 개념

질문에 올바르게 답하기 위해 반드시 이해해야 하는 핵심 개념들은 다음과 같습니다.

Capacitance

Capacitance is the ability of a system to store electric charge per unit voltage. It is defined as the ratio of the electric charge stored on a conductor to the potential difference across it. In coaxial cables, capacitance is influenced by the geometry of the conductors and the dielectric material between them, which affects how much charge can be stored.

Coaxial Cable Structure

A coaxial cable consists of two concentric conductors: an inner conductor with radius R1 and an outer conductor with radius R2. The space between these conductors is filled with an insulating material, which serves as a dielectric. This structure allows for efficient transmission of high-frequency signals while minimizing interference and signal loss.

Dielectric Material

Dielectric materials are insulators that can be polarized by an electric field, which enhances the capacitance of a capacitor. In coaxial cables, the dielectric material between the inner and outer conductors affects the cable's capacitance and signal transmission characteristics. The choice of dielectric material can influence the cable's performance, including its bandwidth and attenuation.