For an RC circuit, find an expression for the angular frequency at which V_R= ½ ε₀.

검증된 단계별 안내

Step 1: Begin by understanding the relationship between the voltage across the resistor (Vᵣ) and the total voltage (ε₀) in an RC circuit. The voltage across the resistor is given by Vᵣ = I * R, where I is the current and R is the resistance.

Step 2: Recall that in an RC circuit, the current I is related to the angular frequency ω by the impedance Z. The impedance Z is given by Z = √(R² + (1/(ωC))²), where C is the capacitance.

Step 3: Use Ohm's Law to express the voltage across the resistor as Vᵣ = ε₀ * (R / Z). Substitute Z = √(R² + (1/(ωC))²) into this expression.

Step 4: Set Vᵣ = ½ ε₀ as given in the problem. This leads to the equation ½ ε₀ = ε₀ * (R / √(R² + (1/(ωC))²)). Simplify this equation to isolate ω.

Step 5: Solve for ω by squaring both sides and rearranging terms. You will arrive at an expression for the angular frequency ω in terms of R and C. The final expression should look like ω = 1 / (R√3C).

비슷한 문제에 대한 검증된 영상 답변:

이 영상 해법은 위 문제에 도움이 된다고 튜터들이 추천한 것입니다.

도움이 되었나요?

주요 개념

질문에 올바르게 답하기 위해 반드시 이해해야 하는 핵심 개념들은 다음과 같습니다.

RC Circuit

An RC circuit consists of a resistor (R) and a capacitor (C) connected in series or parallel. The behavior of the circuit is characterized by the charging and discharging of the capacitor through the resistor, which affects the voltage across the capacitor over time. Understanding the time constant, τ = RC, is crucial as it determines how quickly the capacitor charges to a certain voltage.

Angular Frequency

Angular frequency, denoted by ω, is a measure of how quickly an oscillating system cycles through its phases, expressed in radians per second. In the context of an RC circuit, it relates to the frequency of the voltage or current oscillations when the circuit is subjected to alternating current (AC). The relationship between angular frequency and frequency (f) is given by ω = 2πf.

Voltage Divider Rule

The voltage divider rule is a fundamental principle used to determine the voltage across a particular component in a series circuit. In an RC circuit, this rule can be applied to find the voltage across the resistor or capacitor when a voltage source is applied. For the given condition Vᵣ = ½ ε₀, this rule helps in deriving the expression for angular frequency by relating the voltages across the components to the total voltage.