Skip to main content
Back

Addition Polymers: Structure, Properties, and Applications

Study Guide - Smart Notes

Tailored notes based on your materials, expanded with key definitions, examples, and context.

Addition Polymers

Introduction to Synthetic Addition Polymers

Addition polymers are large molecules formed by the chemical joining of monomers through addition reactions. These polymers are fundamental in materials science and everyday life, with applications ranging from packaging to textiles and engineering materials.

  • Monomer: A small molecule of relatively low molar mass that can join with other similar molecules to form a polymer.

  • Polymer: A molecule of large molar mass consisting of many repeating subunits (monomers).

  • Polymerization: The process of linking monomer units into a polymer.

  • Addition Polymer: A polymer formed when monomer units are linked through addition reactions; all atoms present in the monomer are retained in the polymer.

Examples of addition polymers include polyethylene, polypropylene, polyvinyl chloride (PVC), and polystyrene. The properties of these polymers are determined by the nature of their monomers and the functional groups present.

Common addition polymers such as Teflon, Styrofoam, and polyethylene

Polyethylene: A Polymer of Ethene

Polyethylene (IUPAC: polyethene) is synthesized by the addition polymerization of ethene monomers. This process transforms the carbon–carbon double bonds in ethene into single bonds, allowing the formation of long chains.

  • Structure: The repeating unit of polyethylene is –CH2–CH2–, written as .

  • Applications: Used for insulating electrical wires and making plastic containers.

  • Polymerization Reaction:

Other Addition Polymers: Polypropene, PVC, and Polystyrene

Addition polymerization can occur with various substituted ethene monomers, resulting in polymers with diverse properties.

  • Polypropene (Polypropylene): Formed from propene monomers, with methyl groups attached to every other carbon atom. Used in ropes and carpets.

  • Polyvinyl Chloride (PVC): Formed from vinyl chloride (chloroethene) monomers. Used for electrical wire insulation and raincoat fabrics.

  • Polystyrene: Formed from styrene (vinyl benzene) monomers. Used in packaging and insulation materials.

Polypropene ropes and climbing gear

Structural Diagrams and Practice Problems

Understanding the structure of polymers is essential for predicting their properties.

  • Example: Drawing three repeating units of the addition polymer of 2-butene involves linking the double-bonded carbon atoms with single bonds, resulting in a flexible chain.

  • Practice: Draw structural diagrams for polymers of 1-butene, vinyl fluoride, and monomers such as Saran wrap (vinyl chloride) and acrylic (cyanoethene).

The Addition Polymerization Process

Addition polymerization occurs in three stages:

  1. Initiation: An initiating molecule (e.g., peroxide) with an unpaired electron forms a bond with a carbon atom in the double bond of a monomer.

  2. Propagation: The chain reaction continues as the unpaired electron at the end of the chain forms new bonds with additional monomers.

  3. Termination: The chain growth stops when two unpaired electron ends combine, forming a covalent bond that links two growing chains.

Properties of Plastics

Chemical and Physical Properties

Plastics, which are polymers of substituted ethene (vinyl) monomers, are widely used due to their characteristic properties.

  • Chemical Stability: Plastics are chemically unreactive because their carbon–carbon double bonds are transformed into less reactive single bonds.

  • Flexibility: Plastics are flexible and mouldable due to weak van der Waals attractions between long polymer chains, allowing chains to slide over each other.

  • Effect of Heating: Heating increases flexibility by disrupting van der Waals forces, making plastics soft and mouldable.

Common addition polymers such as Teflon, Styrofoam, and polyethylene

The Effect of Substituted Groups on Polymer Properties

Substituted groups in monomers significantly affect the properties of the resulting polymers.

  • Teflon: Made from tetrafluoroethene monomers, Teflon is highly unreactive due to strong carbon–fluorine bonds, making it ideal for nonstick cookware.

  • Plexiglas: Produced from monomers containing a carboxymethyl group (–COOCH3), Plexiglas is transparent and lightweight but easily damaged by organic solvents due to its carbonyl group.

Acetone dissolving Plexiglas due to carbonyl group interactions

Strengthening Polymers with Crosslinking

Diene Monomers and Crosslinking

Monomers with two double bonds (dienes) can form crosslinks between polymer chains, greatly increasing the strength and rigidity of the material.

  • Neoprene: An addition polymer of 2-chlorobutadiene, neoprene is more resistant to oils and gasoline due to its increased polarity.

  • Crosslinks: Bridges formed between polymer chains by diene monomers or crosslinking agents, resulting in stronger materials.

  • Example: p-divinylbenzene (1,4-diethenylbenzene) is used to crosslink polystyrene chains, controlling rigidity.

Inorganic Crosslinking Agents: Vulcanization

Sulfur is an inorganic crosslinking agent used to harden natural rubber through vulcanization.

  • Vulcanization: Sulfur atoms form crosslinks by adding to the double bonds of two different polymer molecules, increasing hardness and elasticity.

  • Applications: Vulcanized rubber is used in tires, providing elasticity and resistance to deformation.

Sulfur crosslinks in rubber improve elasticity and comfort in tires

Thermoplastics vs. Thermoset Polymers

The degree of crosslinking determines whether a plastic is a thermoplastic or a thermoset polymer.

  • Thermoplastics: Not crosslinked; soften when heated and can be remoulded.

  • Thermoset Polymers: Highly crosslinked; do not soften with heat and retain their shape.

Modeling and Activities

Modeling Polymer Chains and Crosslinking

  • Building models of monomers and linking them demonstrates polymerization and crosslinking.

  • Crosslinked chains (e.g., paperclips or noodles) illustrate increased rigidity and strength.

Chopsticks passing through noodles as a model for crosslinked polymers

Summary Table: Common Addition Polymers

Polymer

Monomer

Properties

Applications

Polyethylene

Ethene

Flexible, chemically stable

Containers, insulation

Polypropylene

Propene

Structurally strong

Ropes, carpets

PVC

Vinyl chloride

Insulating, flexible

Wire insulation, raincoats

Polystyrene

Styrene

Rigid, insulating

Packaging, cups

Teflon

Tetrafluoroethene

Nonstick, unreactive

Cookware

Plexiglas

Methyl methacrylate

Transparent, lightweight

Glass substitute

Neoprene

2-chlorobutadiene

Oil-resistant, elastic

Wet suits, hoses

Additional info: Academic context was added to clarify polymerization mechanisms, structural diagrams, and the effect of functional groups on polymer properties. The summary table was inferred for completeness and exam preparation.

Pearson Logo

Study Prep