BackChapter 5: Thermochemistry – Energy and Chemical Reactions
Study Guide - Smart Notes
Tailored notes based on your materials, expanded with key definitions, examples, and context.
Thermochemistry
Introduction to Thermochemistry
Thermochemistry is a branch of thermodynamics that focuses on the study of energy changes, particularly heat, during chemical reactions. Understanding these energy transformations is essential for predicting reaction behavior and designing chemical processes.
Energy: The ability to do work or transfer heat.
Thermodynamics: The study of energy and its transformations.
Thermochemistry: The study of chemical reactions and the energy changes that involve heat.
The Nature of Chemical Energy
Chemical energy is primarily stored as potential energy in the arrangement of atoms and ions. Electrostatic potential energy is especially important in charged particles.
Electrostatic Potential Energy: Energy due to the interactions between charged particles.
Joule (J): The SI unit of energy.
Bond Formation: Releases energy.
Bond Breaking: Consumes energy.


First Law of Thermodynamics
Law and Definitions
The first law of thermodynamics states that energy can be converted from one form to another, but it cannot be created or destroyed. This principle is fundamental to all energy exchanges in chemistry.
System: The part of the universe being studied (e.g., reactants in a reaction).
Surroundings: Everything outside the system.

Types of Systems
Open System: Exchanges heat and mass with surroundings.
Closed System: Exchanges heat but not mass.
Isolated System: No exchange of heat or mass.

Internal Energy
Internal energy (E) is the sum of all kinetic and potential energies of the system's components. The change in internal energy, ΔE, is a state function and depends only on the initial and final states.
ΔE = Efinal - Einitial
ΔE is negative when energy is released to surroundings.
ΔE is positive when energy is absorbed from surroundings.




Thermodynamic Quantities
Thermodynamic quantities have three parts: a number, a unit, and a sign. The sign indicates whether the system gains or loses energy.
Positive: System gains energy.
Negative: System loses energy.
Heat and Work
Energy exchange between system and surroundings occurs as heat (q) or work (w).
ΔE = q + w
q: Heat
w: Work
Sign Conventions
Quantity | Positive (+) | Negative (-) |
|---|---|---|
q (heat) | System gains heat | System loses heat |
w (work) | Work done on system | Work done by system |
ΔE | Net gain of energy by system | Net loss of energy by system |

Endothermic and Exothermic Processes
Heat absorption and release are classified as endothermic and exothermic, respectively.
Endothermic: System absorbs heat; temperature drops.
Exothermic: System releases heat; temperature rises.


State Functions
Definition and Properties
A state function depends only on the current state of the system, not the path taken to reach it. Internal energy (E) is a state function, while heat (q) and work (w) are not.
Examples: Internal energy, enthalpy, pressure, volume.
Path-dependent: Heat and work.

Enthalpy
Definition and Calculation
Enthalpy (H) is a thermodynamic quantity that accounts for heat flow at constant pressure. It is defined as:
H = E + PV
ΔH = ΔE + PΔV
At constant pressure, ΔH equals the heat gained or lost.
Enthalpy Change and Heat
ΔH > 0: Endothermic process
ΔH < 0: Exothermic process
Pressure–Volume Work
Pressure–volume work is the mechanical work associated with changes in gas volume.
Work done by the system is negative.
Enthalpies of Reaction
Heat of Reaction
The enthalpy change for a reaction (ΔHrxn) is the difference between the enthalpy of products and reactants.
ΔHrxn = Hproducts - Hreactants
Also called the heat of reaction.
Enthalpy Guidelines
Enthalpy is an extensive property (depends on amount).
ΔH for reverse reaction is equal in magnitude, opposite in sign.
ΔH depends on the states of reactants and products.
Calorimetry
Measurement of Heat Flow
Calorimetry is used to measure heat flow in chemical reactions. The instrument used is a calorimeter.
Heat Capacity: Energy required to raise temperature by 1 K.
Specific Heat: Heat capacity per gram.
Molar Heat Capacity: Heat capacity per mole.
Specific Heats of Substances
Substance | Specific Heat (J/g·K) |
|---|---|
N2 (gas) | 1.04 |
H2O (liquid) | 4.18 |
Al (solid) | 0.90 |
CH4 (gas) | 2.20 |
Fe (solid) | 0.45 |
CO2 (gas) | 0.84 |
Hg (liquid) | 0.14 |
CaCO3 (solid) | 0.82 |
Constant-Pressure Calorimetry
Reactions in aqueous solution can be measured using a simple calorimeter. The specific heat of water is used for dilute solutions.
Bomb Calorimetry (Constant Volume)
Reactions are carried out in a sealed bomb calorimeter. The heat absorbed or released by water approximates the enthalpy change.
At constant volume, the measured value is ΔE.
For most reactions, ΔE ≈ ΔH.
Hess’s Law
Principle and Application
Hess’s law states that if a reaction is carried out in a series of steps, the overall enthalpy change is the sum of the enthalpy changes for the individual steps. This is possible because enthalpy is a state function.
ΔHoverall = ΣΔHsteps
Enthalpies of Formation
Definition
The enthalpy of formation (ΔHf) is the enthalpy change for the formation of a compound from its elements in their standard states.
ΔHf for an element in its standard state is zero.
Standard Enthalpies of Formation
Substance | Formula | ΔHf (kJ/mol) |
|---|---|---|
Acetylene | C2H2 (gas) | 226.7 |
Ammonia | NH3 (gas) | -46.19 |
Benzene | C6H6 (liquid) | 49.0 |
Calcium carbonate | CaCO3 (solid) | -1207.1 |
Carbon dioxide | CO2 (gas) | -393.5 |
Water | H2O (liquid) | -285.8 |
Water vapor | H2O (gas) | -241.8 |
Calculating ΔH Using Hess’s Law
Apply Hess’s law using tabulated values to obtain the heat of reaction:
n and m are stoichiometric coefficients.
Bond Enthalpies
Definition and Application
Bond enthalpy is the energy required to break one mole of a particular bond in a gaseous substance. It is always positive, and the greater the bond enthalpy, the stronger the bond.
Energy is released when a bond forms.
Bond enthalpy values can be used to estimate reaction enthalpies.
Average Bond Enthalpies
Bond | Bond Enthalpy (kJ/mol) |
|---|---|
C–H | 413 |
C–C | 348 |
C=C | 614 |
O–H | 463 |
H–H | 436 |
O=O | 495 |
Bond Enthalpies and Enthalpies of Reaction
Add bond energy values for all bonds made (+).
Subtract bond energy values for all bonds broken.
The result estimates ΔH for the reaction.
Energy in Foods and Fuels
Energy in Foods
The energy released when one gram of food is combusted is its fuel value. Most energy in foods comes from carbohydrates, fats, and proteins.
Food | Carbohydrate (%) | Fat (%) | Protein (%) | Fuel Value (kJ/g) | Fuel Value (kcal/g) |
|---|---|---|---|---|---|
Bread | 52 | 3 | 9 | 12 | 2.8 |
Cheese | 4 | 37 | 28 | 20 | 4.7 |
Eggs | 0.7 | 10 | 13 | 6.0 | 1.4 |
Peanuts | 22 | 39 | 26 | 23 | 5.5 |
Energy in Fuels
Most energy consumed comes from fossil fuels. Fuel values and compositions vary by source.
Fuel | C (%) | H (%) | O (%) | Fuel Value (kJ/g) |
|---|---|---|---|---|
Wood (pine) | 50 | 6 | 44 | 18 |
Anthracite coal | 82 | 1 | 2 | 31 |
Gasoline | 85 | 15 | 0 | 48 |
Natural gas | 70 | 23 | 0 | 49 |
Hydrogen | 0 | 100 | 0 | 142 |
Other Energy Sources
Nuclear fission: 8.6% of U.S. energy needs.
Renewable sources (solar, wind, geothermal, hydroelectric, biomass): 9.9% of U.S. energy needs.