Skip to main content
Back

CHEM 134 Exam 3 Study Guide: Thermochemistry, Quantum Mechanics, and Periodic Properties

Study Guide - Smart Notes

Tailored notes based on your materials, expanded with key definitions, examples, and context.

Chapter 7: Thermochemistry

Energy, Heat, and Work

Thermochemistry studies the energy changes, especially heat, that accompany chemical reactions and physical changes.

  • Energy: The capacity to do work or produce heat.

  • Heat (q): Energy transferred due to temperature difference.

  • Work (w): Energy used to move an object against a force.

  • Classification of Energy: Kinetic (motion) and potential (position or composition).

  • Conservation of Energy: Energy cannot be created or destroyed, only transformed (First Law of Thermodynamics).

Example: When gasoline burns in a car engine, chemical potential energy is converted to kinetic energy and heat.

System and Surroundings

In thermochemistry, the universe is divided into the system (the part under study) and the surroundings (everything else).

  • Types of Systems:

    • Open system: Exchanges both energy and matter with surroundings.

    • Closed system: Exchanges energy but not matter.

    • Isolated system: Exchanges neither energy nor matter.

Units of Energy

  • SI unit of energy: Joule (J)

  • 1 calorie (cal) = 4.184 J

  • 1 kilojoule (kJ) = 1000 J

The First Law of Thermodynamics

  • States that the total energy of the universe is constant.

  • Mathematically:

  • State Function: A property that depends only on the current state, not the path taken (e.g., internal energy, enthalpy).

Energy Flow and Diagrams

  • Energy flows from the system to the surroundings (exothermic) or from the surroundings to the system (endothermic).

  • Sign conventions:

    • q > 0: Heat absorbed by system (endothermic)

    • q < 0: Heat released by system (exothermic)

    • w > 0: Work done on system

    • w < 0: Work done by system

    • : Net gain of energy by system

    • : Net loss of energy by system

Heat Capacity and Specific Heat

  • Heat Capacity (C): Amount of heat required to raise the temperature of an object by 1°C.

  • Specific Heat Capacity (c): Heat required to raise 1 g of a substance by 1°C.

  • Molar Heat Capacity: Heat required to raise 1 mol of a substance by 1°C.

  • Formula:

Example: Calculating the heat required to raise the temperature of 50 g of water by 10°C using .

Heat Transfer and Calorimetry

  • Heat lost by one substance is gained by another:

  • Calorimetry: Measurement of heat flow.

  • Bomb Calorimeter: Measures energy change at constant volume.

  • Coffee-cup Calorimeter: Measures energy change at constant pressure.

Enthalpy and Enthalpy Change

  • Enthalpy (H):

  • Enthalpy Change (): Heat exchanged at constant pressure.

  • Endothermic: (absorbs heat)

  • Exothermic: (releases heat)

Thermochemical Equations and Stoichiometry

  • Thermochemical equations show the enthalpy change for a reaction.

  • Stoichiometry can be used to calculate heat produced or absorbed based on moles of reactants/products.

Hess's Law

  • The enthalpy change for a reaction is the same, regardless of the number of steps.

  • Can be used to calculate for reactions by combining known equations.

Standard Enthalpy Changes

  • Standard State: Most stable form of a substance at 1 bar (or 1 atm) and 25°C.

  • Standard Enthalpy of Formation (): Enthalpy change when 1 mol of a compound forms from its elements in their standard states.

  • For pure elements in their standard state, .

  • Formula for reaction enthalpy:

Energy Use and the Environment

  • Fossil fuel combustion releases energy and CO2, contributing to climate change.

  • Thermochemical calculations can estimate energy content and environmental impact.

Chapter 8: The Quantum-Mechanical Model of the Atom

The Nature of Light and Electromagnetic Radiation

Light exhibits both wave-like and particle-like properties, described by quantum mechanics.

  • Electromagnetic Radiation: Energy transmitted through space as waves.

  • Speed of Light (c):

  • Frequency (\nu): Number of cycles per second (Hz or s-1).

  • Wavelength (\lambda): Distance between successive wave peaks (meters).

  • Relationship:

The Electromagnetic Spectrum

  • Includes (in order of increasing wavelength): gamma rays, X-rays, ultraviolet, visible, infrared, microwaves, radio waves.

  • As wavelength increases, frequency and energy decrease.

Energy of a Photon

  • Energy of a photon:

  • Planck's constant ():

Example: Calculate the energy of a photon with .

Wave-Particle Duality and Atomic Spectroscopy

  • Light behaves as both a wave and a particle (photon).

  • Atoms emit or absorb light at specific wavelengths, producing line spectra.

  • Bohr Model: Electrons occupy quantized energy levels; transitions produce spectral lines.

  • Series of Lines: Lyman (UV), Balmer (visible), Paschen (IR), etc.

Energy Transitions in Hydrogen

  • Absorption: Electron moves to higher energy level (n increases).

  • Emission: Electron falls to lower energy level (n decreases).

  • Energy difference:

Wave Behavior of Matter

  • de Broglie relation:

  • All matter has wave properties, significant for small particles like electrons.

Uncertainty Principle and Quantum Numbers

  • Heisenberg Uncertainty Principle: Impossible to know both position and momentum of an electron precisely.

  • Schrödinger Equation: Describes the probability distribution of electrons in atoms.

  • Orbitals: Regions of space with high probability of finding an electron.

  • Quantum Numbers:

    • Principal (n): Energy level, n = 1, 2, 3, ...

    • Angular momentum (l): Shape, l = 0 (s), 1 (p), 2 (d), 3 (f)

    • Magnetic (ml): Orientation, -l to +l

    • Spin (ms): +1/2 or -1/2

Shells, Subshells, and Orbitals

  • Shell: Set of orbitals with same n.

  • Subshell: Set of orbitals with same n and l.

  • Orbital: Defined by n, l, ml.

  • Radial nodes:

  • Nodal planes: Planes where probability of finding electron is zero.

  • Degenerate orbitals: Orbitals with same energy.

  • Gerade (even, s and d) and ungerade (odd, p and f) orbitals.

Example: Sketch the shapes of s (spherical) and p (dumbbell) orbitals.

Chapter 9: Periodic Properties of Elements

Electron Configuration

  • Describes the arrangement of electrons in an atom.

  • Pauli Exclusion Principle: No two electrons in an atom can have the same set of four quantum numbers.

  • Aufbau Principle: Electrons fill lowest energy orbitals first.

  • Hund's Rule: Electrons occupy degenerate orbitals singly before pairing.

  • Shorthand notation: Uses noble gas core to abbreviate configuration.

Subshell Splitting, Penetration, and Shielding

  • In multi-electron atoms, subshells split due to electron-electron repulsions.

  • Penetration: Ability of an electron to get close to the nucleus.

  • Shielding: Inner electrons reduce the effective nuclear charge felt by outer electrons.

Valence and Core Electrons

  • Valence electrons: Electrons in the outermost shell, involved in bonding.

  • Core electrons: Inner electrons, not involved in bonding.

Electron Configuration and the Periodic Table

  • Periodic table structure reflects electron configurations.

  • Groups/families have similar valence electron configurations and properties.

  • Exceptions: Chromium (Cr) and Copper (Cu) have irregular configurations.

Properties and Electron Configuration

  • Noble gases: Full valence shell, very stable.

  • Alkali metals: One valence electron, highly reactive.

  • Halogens: Seven valence electrons, very reactive.

Electron Configuration of Ions

  • Cations: Remove electrons from highest n orbital first.

  • Anions: Add electrons to lowest available energy orbital.

Trends in Atomic and Ionic Radii

  • Atomic radius: Decreases across a period, increases down a group.

  • Ionic radius: Cations are smaller, anions are larger than parent atom.

Transition Metals: Electron Configuration and Magnetism

  • Transition metal cations lose s electrons before d electrons.

  • Paramagnetic: Unpaired electrons, attracted to magnetic field.

  • Diamagnetic: All electrons paired, not attracted to magnetic field.

Ionization Energy

  • Energy required to remove an electron from a gaseous atom.

  • Trend: Increases across a period, decreases down a group.

  • Equation:

  • Successive ionization energies increase for each electron removed.

Electron Affinity

  • Energy change when an electron is added to a gaseous atom.

  • Trend: Becomes more negative across a period (exceptions exist).

  • Equation:

Properties of Metals and Nonmetals

  • Metals: Shiny, conductive, malleable, tend to lose electrons.

  • Nonmetals: Dull, poor conductors, tend to gain electrons.

  • Metallic character: Increases down a group, decreases across a period.

Property

Trend Across Period

Trend Down Group

Atomic Radius

Decreases

Increases

Ionization Energy

Increases

Decreases

Electron Affinity

Becomes more negative

Becomes less negative

Metallic Character

Decreases

Increases

Additional info: This study guide is based on the provided exam review topics and includes expanded academic context for clarity and completeness.

Pearson Logo

Study Prep