BackExam 3 Study Guide: Chemical Thermodynamics, Electrochemistry, and Nuclear Chemistry
Study Guide - Smart Notes
Tailored notes based on your materials, expanded with key definitions, examples, and context.
Chapter 19 – Chemical Thermodynamics
Spontaneous Processes
Chemical thermodynamics explores the energy changes and spontaneity of chemical reactions. A spontaneous process occurs without external intervention, while a nonspontaneous process requires energy input.
Spontaneous Process: Proceeds on its own under given conditions (e.g., ice melting at room temperature).
Nonspontaneous Process: Occurs only with continuous energy input (e.g., water freezing at room temperature).
Most spontaneous processes are irreversible due to the increase in entropy.
Entropy and the Second Law of Thermodynamics
Entropy (ΔS) is a measure of disorder or randomness in a system. The sign of ΔS indicates whether entropy is increasing (+) or decreasing (−).
Positive ΔS: Entropy increases; system becomes more disordered.
Negative ΔS: Entropy decreases; system becomes more ordered.
Second Law of Thermodynamics: The entropy of the universe increases in any spontaneous process.
Spontaneity is favored when entropy increases.
Molecular Interpretation of Entropy and the Third Law of Thermodynamics
Entropy changes can be interpreted at the molecular level, especially during phase changes and dissolution.
Phase Changes: Entropy increases from solid → liquid → gas.
Dissolving: Dissolving a solid in water increases entropy.
Number of Gas Moles: More moles of gas = higher entropy.
Third Law of Thermodynamics: The entropy of a perfect crystal at absolute zero (0 K) is zero.
Entropy Changes in Chemical Reactions
Several factors affect the entropy of a system, including temperature, volume, and molecular complexity.
Temperature: Higher temperature increases entropy.
Volume: Greater volume increases entropy.
Molecular Complexity: More complex molecules have higher standard molar entropy.
Standard Molar Entropy (ΔS°): Entropy of one mole of a substance under standard conditions.
Calculation: Use the equation:
Gibbs Free Energy and Temperature
Gibbs Free Energy (ΔG) determines the spontaneity of a reaction. The sign of ΔG indicates whether a process is spontaneous.
Negative ΔG: Reaction is spontaneous.
Positive ΔG: Reaction is nonspontaneous.
ΔG is related to enthalpy (ΔH) and entropy (ΔS) by:
Temperature can affect spontaneity: If ΔH and ΔS are both positive, higher T favors spontaneity.
Standard Free Energy Change:
Chapter 20 – Electrochemistry
Oxidation States and Oxidation-Reduction Reactions
Electrochemistry studies the transfer of electrons in chemical reactions. Determining oxidation states is essential for identifying redox reactions.
Oxidation: Loss of electrons; increase in oxidation state.
Reduction: Gain of electrons; decrease in oxidation state.
Identify which element is oxidized or reduced in a reaction.
Balancing Redox Equations
Redox equations are balanced using the half-reaction method, which separates oxidation and reduction processes.
Half-Reaction: Shows either oxidation or reduction, including electrons.
Steps to balance:
Write separate half-reactions.
Balance atoms (except H and O).
Balance O with H2O; balance H with H+ (acidic) or OH- (basic).
Balance charge with electrons.
Combine and balance electrons.
Acidic and basic conditions require different balancing steps.
Voltaic Cells
A voltaic cell (galvanic cell) generates electrical energy from spontaneous redox reactions.
Salt Bridge: Maintains charge balance by allowing ion flow.
Anode: Site of oxidation; electrons flow from anode to cathode.
Cathode: Site of reduction.
Electrons flow from anode to cathode in spontaneous processes.
Half-reactions can be written for each electrode.
Cell Potentials under Standard Conditions
Cell potential (emf or voltage) measures the driving force of a redox reaction. Standard cell potential (E°) is measured under standard conditions.
Standard Cell Potential:
Use standard reduction potentials to calculate E° for any cell.
More positive E°red means greater tendency to be reduced (stronger oxidizing agent).
Less positive E°red means greater tendency to be oxidized (stronger reducing agent).
Free Energy and Calculations under Nonstandard Conditions
The sign of E°cell indicates spontaneity: positive E°cell means spontaneous. Calculations may involve Gibbs Free Energy, equilibrium constants, and the Nernst equation.
Relationship between Free Energy and Cell Potential:
Nernst Equation (for nonstandard conditions):
Standard Cell Potential and Equilibrium Constant:
Constants:
R = 8.314 J/mol·K
F = 96,485 J/V·mol
K = °C + 273.15
Chapter 21 – Nuclear Chemistry
Radioactivity and Nuclear Equations
Nuclear chemistry studies changes in atomic nuclei, including radioactivity and nuclear reactions.
Nucleus: Contains protons and neutrons (nucleons).
Nuclide: Specific isotope of an element.
Isotopes: Same atomic number, different mass number (different neutrons).
Types of Radioactive Decay:
Alpha emission: Loss of He-4 nucleus; mass number decreases by 4, atomic number by 2.
Beta emission: Neutron converts to proton; atomic number increases by 1.
Gamma radiation: Emission of high-energy photon; no change in mass or atomic number.
Positron emission: Proton converts to neutron; atomic number decreases by 1.
Electron capture: Proton converts to neutron; atomic number decreases by 1.
Mass and atomic numbers must be balanced in nuclear equations.
Patterns of Nuclear Stability
Nuclear stability depends on the neutron-to-proton ratio. The belt of stability shows stable nuclides; as atomic number increases, the ideal ratio increases.
Belt of stability ends at element with highest stable atomic number (bismuth, Z = 83).
Nuclear Transmutations
Nuclear transmutation is the conversion of one nuclide into another by bombardment with particles.
Requires high-energy particles (e.g., accelerated in cyclotrons).
Shorthand notation: e.g.,
Transuranium elements: Elements with atomic number > 92; all are synthetic and radioactive.
Rates of Radioactive Decay
Radioactive decay follows first-order kinetics. Half-life (t1/2) is the time for half the sample to decay.
First-order kinetics: Decay rate depends on amount present.
Decay constant (k): Units are s-1 (becquerel = 1 decay/s).
Equations:
Provided Information Tables
Table 1 – Thermodynamic Quantities (Standard Conditions)
This table provides standard enthalpy of formation (ΔH°f), standard free energy of formation (ΔG°f), and standard molar entropy (ΔS°) for selected substances.
Substance | ΔH°f (kJ/mol) | ΔG°f (kJ/mol) | ΔS° (J/K·mol) |
|---|---|---|---|
C (s, graphite) | 0 | 0 | 5.69 |
C2H2 (g) | 226.7 | 209.2 | 200.8 |
C2H4 (g) | 52.30 | 68.11 | 219.4 |
C2H6 (g) | -84.68 | -32.89 | 229.5 |
CO (g) | -110.5 | -137.2 | 197.9 |
CO2 (g) | -393.5 | -394.4 | 213.6 |
H2 (g) | 0 | 0 | 130.58 |
O2 (g) | 0 | 0 | 205.0 |
H2O (g) | -241.82 | -228.57 | 188.83 |
H2O (l) | -285.83 | -237.13 | 69.91 |
Table 2 – Standard Reduction Potentials
This table lists standard reduction potentials (E°) for common half-reactions, used to calculate cell potentials.
Half Reaction | E° (V) |
|---|---|
F2 (g) + 2e- → 2F- (aq) | +2.87 |
Cl2 (g) + 2e- → 2Cl- (aq) | +1.359 |
Br2 (l) + 2e- → 2Br- (aq) | +1.065 |
O2 (g) + 4H+ (aq) + 4e- → 2H2O (l) | +1.23 |
Fe3+ (aq) + e- → Fe2+ (aq) | +0.771 |
I2 (s) + 2e- → 2I- (aq) | +0.536 |
Cu2+ + 2e- → Cu (s) | +0.34 |
Sn4+ + 2e- → Sn2+ (aq) | +0.154 |
2H+ + 2e- → H2 (g) | 0 |
Pb2+ + 2e- → Pb (s) | -0.126 |
Ni2+ + 2e- → Ni (s) | -0.28 |
Li+ + e- → Li (s) | -3.05 |
Key Equations and Constants
R = 8.314 J/mol·K
F = 96,485 J/V·mol
K = °C + 273.15
Example: To calculate the standard entropy change for the reaction C2H6 (g) + O2 (g) → CO2 (g) + H2O (l), use the values from Table 1 and the equation for ΔS°rxn.
Additional info: Academic context and explanations have been expanded for clarity and completeness. All equations are provided in LaTeX format as required for exam preparation.