Skip to main content
Back

General Chemistry I: Chemical Reactions, Solutions, and Gases – Study Guide

Study Guide - Smart Notes

Tailored notes based on your materials, expanded with key definitions, examples, and context.

Chemical Reactions and Chemical Quantities

Introduction to Chemical Reactions

Chemical reactions involve the transformation of substances (reactants) into new substances (products) through the breaking and forming of chemical bonds. Understanding chemical quantities allows chemists to predict the amounts of substances consumed and produced in a reaction.

  • Chemical Reaction: A process in which one or more substances are converted into one or more different substances.

  • Chemical Quantities: Refers to the measurable amounts of reactants and products involved in a chemical reaction, often expressed in moles, grams, or molecules.

  • Example: The combustion of methane:

Climate Change and the Combustion of Fossil Fuels

The combustion of fossil fuels releases carbon dioxide, a greenhouse gas, contributing to climate change. Understanding the stoichiometry of these reactions helps quantify emissions.

  • Combustion Reaction: A reaction where a substance reacts with oxygen, releasing energy, CO2, and H2O.

  • Application: Calculating the amount of CO2 produced from burning a given mass of fuel.

Writing and Balancing Chemical Equations

Balanced chemical equations represent the conservation of mass and atoms in a reaction. Each side of the equation must have the same number of each type of atom.

  • Reactants: Substances present before the reaction.

  • Products: Substances formed by the reaction.

  • Chemical Equation: Uses formulas and coefficients to represent a reaction.

  • States: (s) solid, (l) liquid, (g) gas, (aq) aqueous.

  • Balancing: Adjusting coefficients to ensure equal numbers of atoms on both sides.

  • Example:

Reaction Stoichiometry

Stoichiometry involves using balanced equations to calculate the relationships between reactants and products in a chemical reaction.

  • Coefficients: Indicate the relative number of moles of each substance.

  • Stoichiometric Calculations: Use mole ratios from the balanced equation to convert between amounts of reactants and products.

  • Example: How many moles of CO2 are produced from 2 moles of C2H6 in ? Answer: 4 moles CO2 per 2 moles C2H6.

Stoichiometric Relationships: Limiting Reactant, Theoretical Yield, Percent Yield, and Reactant in Excess

In many reactions, one reactant is used up first (limiting reactant), determining the maximum amount of product (theoretical yield). The percent yield compares actual and theoretical yields.

  • Limiting Reactant: The reactant that is completely consumed first, limiting the amount of product formed.

  • Theoretical Yield: The maximum amount of product that can be formed from the limiting reactant.

  • Percent Yield:

  • Reactant in Excess: The reactant(s) not completely consumed in the reaction.

Examples of Chemical Reactions

Common types of reactions include combustion, reactions of alkali metals, and reactions involving halogens.

  • Combustion: Hydrocarbon + O2 → CO2 + H2O

  • Alkali Metals: React vigorously with water to form hydroxides and hydrogen gas.

  • Halogens: React with metals to form ionic halides.

Solutions and Aqueous Reactions

Introduction to Solutions and Aqueous Reactions

A solution is a homogeneous mixture of two or more substances. An aqueous solution has water as the solvent. Aqueous reactions occur when reactants are dissolved in water.

  • Solvent: The substance present in the greatest amount (usually water in aqueous solutions).

  • Solute: The substance dissolved in the solvent.

  • Example: Salt water is an aqueous solution of NaCl in H2O.

Molecular Gastronomy and the Spherified Cherry

Molecular gastronomy uses chemical reactions, such as gelation and spherification, to create novel food textures. These often involve reactions between ions in solution.

  • Example: Spherification uses sodium alginate and calcium chloride to form edible gels.

Solution Concentration

Concentration describes the amount of solute in a given quantity of solution. Molarity is the most common unit.

  • Molarity (M):

  • Dilute Solution: Contains a small amount of solute relative to solvent.

  • Concentrated Solution: Contains a large amount of solute.

  • Solution Dilution: (where = molarity, = volume)

Solution Stoichiometry

Stoichiometry in solutions involves calculating the amounts of reactants and products in reactions occurring in solution, often using molarity and volume.

  • Example: Calculating the volume of 0.1 M HCl needed to neutralize 0.05 mol NaOH.

Types of Aqueous Solutions and Solubility

Compounds in water can be classified by their solubility and ability to conduct electricity (electrolytes).

  • Soluble: Dissolves readily in water.

  • Insoluble: Does not dissolve appreciably.

  • Electrolyte: Produces ions in solution; conducts electricity.

  • Nonelectrolyte: Does not produce ions; does not conduct electricity.

  • Strong Electrolyte: Completely dissociates in water (e.g., NaCl).

  • Weak Electrolyte: Partially dissociates (e.g., acetic acid).

  • Solubility Rules: Guidelines for predicting whether an ionic compound is soluble in water.

Precipitation Reactions

When two aqueous solutions are mixed, an insoluble product (precipitate) may form.

  • Precipitate: An insoluble solid formed in a reaction.

  • Example:

Representing Aqueous Reactions: Molecular, Ionic, and Net Ionic Equations

Chemical equations for aqueous reactions can be written in three forms:

  • Molecular Equation: Shows all reactants and products as compounds.

  • Complete Ionic Equation: Shows all strong electrolytes as ions.

  • Net Ionic Equation: Shows only the species that actually change during the reaction.

  • Example: For the precipitation of AgCl:

    • Molecular:

    • Complete Ionic:

    • Net Ionic:

Acid–Base Reactions

Acid-base reactions involve the transfer of protons (H+) between reactants. Neutralization occurs when an acid and base react to form water and a salt.

  • Arrhenius Acid: Produces H+ in water.

  • Arrhenius Base: Produces OH- in water.

  • Monoprotic Acid: Can donate one proton (e.g., HCl).

  • Diprotic Acid: Can donate two protons (e.g., H2SO4).

  • Polyprotic Acid: Can donate more than one proton.

  • Titration: A technique to determine the concentration of a solution using a reaction with a solution of known concentration.

  • Indicator: A substance that changes color at (or near) the equivalence point.

  • Equivalence Point: The point at which stoichiometrically equivalent quantities of acid and base have reacted.

  • End Point: The point at which the indicator changes color.

  • Calculation: for monoprotic acid-base titrations.

Gas-Evolution Reactions

Some reactions in aqueous solution produce a gas as a product, such as CO2, H2, or SO2.

  • Example:

Oxidation–Reduction (Redox) Reactions

Redox reactions involve the transfer of electrons between substances. Oxidation is the loss of electrons; reduction is the gain of electrons.

  • Oxidation State (Number): A value assigned to an atom to indicate its degree of oxidation or reduction.

  • Oxidizing Agent: Causes oxidation; is reduced.

  • Reducing Agent: Causes reduction; is oxidized.

  • Activity Series: A list of elements ordered by their ability to be oxidized; used to predict spontaneity of redox reactions.

  • Example:

Gases and Their Properties

Review of Gaseous Properties

Gases have unique properties: they expand to fill their container, are compressible, and have low densities compared to solids and liquids.

  • Pressure (P): The force exerted per unit area by gas molecules colliding with surfaces.

  • Common Units: Atmosphere (atm), Pascal (Pa), Torr, mmHg.

  • Conversion:

Supersonic Skydiving and the Risk of Decompression

Rapid changes in pressure can cause decompression sickness, highlighting the importance of understanding gas pressure in real-world scenarios.

  • Manometer: Device to measure gas pressure.

  • Blood Pressure: Measured in mmHg, an application of pressure concepts.

The Simple Gas Laws

The behavior of gases can be described by several simple laws relating pressure, volume, temperature, and amount.

  • Boyle's Law: (at constant T, n)

  • Charles's Law: (at constant P, n)

  • Avogadro's Law: (at constant P, T)

The Ideal Gas Law

The ideal gas law combines the simple gas laws into a single equation relating pressure, volume, temperature, and amount of gas.

  • Equation:

  • R (Gas Constant):

  • Applications: Calculating molar volume, density, and molar mass of a gas.

Applications of the Ideal Gas Law

  • Molar Volume at STP: per mole at and .

  • Density of a Gas: (where = molar mass)

  • Molar Mass of a Gas:

Mixtures of Gases and Partial Pressures

In a mixture, each gas exerts a partial pressure proportional to its amount.

  • Dalton's Law:

  • Collecting Gases Over Water: Subtract vapor pressure of water from total pressure to find pressure of collected gas.

Gases in Chemical Reactions: Stoichiometry Revisited

Gas laws can be combined with stoichiometry to calculate volumes, masses, or moles of gases involved in reactions.

  • Example: Calculating the volume of O2 produced from the decomposition of KClO3.

Kinetic Molecular Theory: A Model for Gases

This theory explains gas behavior in terms of particle motion and collisions.

  • Root Mean Square Velocity: (where = molar mass in kg/mol)

Mean Free Path, Diffusion, and Effusion of Gases

Gas particles travel between collisions (mean free path), and can spread (diffusion) or escape through small holes (effusion).

  • Graham's Law of Effusion:

Real Gases: The Effects of Size and Intermolecular Forces

Real gases deviate from ideal behavior at high pressures and low temperatures due to particle volume and intermolecular forces.

  • Van der Waals Equation:

  • Corrections: 'a' corrects for intermolecular attractions; 'b' corrects for finite molecular volume.

Pearson Logo

Study Prep