BackGeneral Chemistry Study Guide: Solutions, Quantum Theory, Periodicity, and Chemical Bonding
Study Guide - Smart Notes
Tailored notes based on your materials, expanded with key definitions, examples, and context.
Chapter 5: Solutions and Dissolving
Solutions, Solute, and Solvent
In chemistry, a solution is a homogeneous mixture composed of two or more substances. The solute is the substance present in a lesser amount, while the solvent is the substance present in a greater amount and does the dissolving.
Solution: Uniform mixture of solute and solvent.
Solute: Substance dissolved (e.g., salt in saltwater).
Solvent: Substance doing the dissolving (e.g., water in saltwater).
Dissolving Process at the Molecular Level:
Ionic Compounds: Dissociate into ions when dissolved in water. For example, NaCl(s) → Na+(aq) + Cl-(aq).
Molecular Compounds: Disperse as intact molecules (do not form ions). For example, sugar (C12H22O11) dissolves as whole molecules.
Polyatomic Ions: Remain intact during dissociation (e.g., SO42- stays together).
Electrolytes
Electrolytes are substances that produce ions when dissolved in water, allowing the solution to conduct electricity.
Strong Electrolytes: Completely dissociate into ions (e.g., NaCl, HCl).
Weak Electrolytes: Partially dissociate into ions (e.g., acetic acid, CH3COOH).
Nonelectrolytes: Do not produce ions in solution (e.g., sugar, ethanol).
Example: NaCl is a strong electrolyte; CH3COOH is a weak electrolyte; C6H12O6 (glucose) is a nonelectrolyte.
Calculations: Molarity and Dilution
Molarity (M) is a measure of concentration, defined as moles of solute per liter of solution.
Formula:
Conversions:
Dilution: To dilute a solution, use the equation:
Where and are the initial molarity and volume, and and are the final molarity and volume.
Example: To prepare 250 mL of 0.10 M NaCl from a 1.0 M stock solution: L = 25 mL.
Calculations: Solution Stoichiometry
Stoichiometry in solutions involves using molarity and balanced chemical equations to relate volumes, concentrations, and amounts of reactants or products.
Use molarity to convert between volume and moles:
Use the mole ratio from the balanced equation to relate different substances.
Only moles can be used in mole-to-mole conversions.
Example: How many grams of AgCl are formed when 50.0 mL of 0.200 M AgNO3 reacts with excess NaCl?
Step 1: mol
Step 2: 1:1 mole ratio, so 0.0100 mol AgCl formed
Step 3: g
Chapter 8: The Quantum-Mechanical Model of the Atom
Light & Electromagnetic Radiation (EMR)
Light exhibits both wave-like and particle-like properties. The electromagnetic spectrum includes all types of electromagnetic radiation, ordered by wavelength and frequency.
Wave Properties: Characterized by wavelength (), frequency (), and speed ().
Relationship:
Photon Energy:
Order of Spectrum: Radio < Microwave < Infrared < Visible < Ultraviolet < X-ray < Gamma ray (increasing energy, decreasing wavelength)
Unit Conversions: Pay attention to metric prefixes (e.g., nm, m, Hz).
Example: Calculate the energy of a photon with nm.
Convert nm to m: $500= 5.00 \times 10^{-7}$ m
J
Bohr Model & Electron Transitions
The Bohr model describes electrons in hydrogen as occupying quantized energy levels. Transitions between levels involve absorption or emission of photons.
Absorption: Electron moves to higher energy level (requires energy).
Emission: Electron falls to lower energy level (releases energy).
Ground State: Lowest energy level.
Excited State: Any higher energy level.
Energy of Transition: J (for hydrogen)
Example: An electron drops from to in hydrogen. Calculate the energy released.
Quantum Mechanical Model
The quantum mechanical model treats electrons as having both wave and particle properties. Electrons are described by quantum numbers and occupy orbitals.
Four Quantum Numbers:
n (principal): energy level/shell
l (angular momentum): subshell/shape (0=s, 1=p, 2=d, 3=f)
ml (magnetic): orientation
ms (spin): +1/2 or -1/2
Shells, Subshells, Orbitals: Shells contain subshells; subshells contain orbitals.
Orbital Shapes: s (spherical), p (dumbbell), d (clover), f (complex)
Maximum Electrons: s: 2, p: 6, d: 10, f: 14 per subshell
Example: The 3p subshell has 3 orbitals and can hold 6 electrons.
Chapter 9: Periodic Properties of the Elements
Orbital Diagrams & Electron Configurations
Electron configurations describe the arrangement of electrons in an atom. Orbital diagrams use boxes and arrows to represent orbitals and electron spins.
Aufbau Principle: Electrons fill lowest energy orbitals first.
Hund’s Rule: Electrons fill degenerate orbitals singly before pairing.
Pauli Exclusion Principle: No two electrons in an atom can have the same set of four quantum numbers.
Full Configuration: Lists all occupied orbitals (e.g., 1s2 2s2 2p6).
Condensed (Noble Gas) Configuration: Uses previous noble gas in brackets (e.g., [Ne] 3s2 3p4).
Exceptions: Some transition metals and heavier elements have anomalous configurations (e.g., Cr: [Ar] 4s1 3d5).
Valence Electrons: Electrons in the outermost shell; core electrons are all others.
Example: Write the electron configuration for Fe: [Ar] 4s2 3d6.
Periodic Trends
Periodic trends describe how certain properties of elements change across periods and down groups in the periodic table.
Effective Nuclear Charge (Zeff): (Z = atomic number, S = shielding electrons)
Atomic Radius: Decreases across a period, increases down a group.
Ionic Radius: Cations are smaller, anions are larger; compare isoelectronic series by nuclear charge.
Ionization Energy (IE): Energy to remove an electron; increases across a period, decreases down a group. Large jumps indicate removal of core electrons.
Electron Affinity: Energy change when an atom gains an electron; generally more negative across a period.
Metallic Character: Increases down a group, decreases across a period.
Example: Na has a lower ionization energy than Cl; Cl has a higher electron affinity than Na.
Chapter 10: Chemical Bonding I: The Lewis Model
Bonding Basics
The Lewis model uses electron dot symbols to represent valence electrons and predict bonding.
Lewis Symbols: Dots represent valence electrons around element symbols.
Octet Rule: Atoms tend to gain, lose, or share electrons to achieve 8 valence electrons.
Ionic Bonding: Transfer of electrons from metal to nonmetal; forms ions.
Covalent Bonding: Sharing of electrons between nonmetals.
Bond Polarity: Determined by electronegativity difference ():
: Ionic
: Polar covalent
: Nonpolar covalent
Single, Double, Triple Bonds: More shared pairs = stronger, shorter bonds.
Example: H2O has polar covalent bonds; O2 has a double bond.
Lewis Structures & Formal Charge
Lewis structures show the arrangement of atoms and electrons in a molecule. Formal charge helps identify the most stable structure.
Drawing Lewis Structures: Count valence electrons, arrange atoms, assign lone pairs and bonds.
Formal Charge:
Dominant Structure: Minimizes formal charges, negative charges on most electronegative atoms.
Resonance: Multiple valid Lewis structures; actual structure is a hybrid.
Octet Rule Exceptions:
Odd-electron species (free radicals)
Incomplete octet (e.g., Be, B compounds)
Expanded octet (elements in period 3 or higher)
Example: Draw resonance structures for NO3-.
Chapter 11: Chemical Bonding II: Molecular Shapes, VSEPR & Valence Bond Theory
VSEPR & Molecular Geometry
The Valence Shell Electron Pair Repulsion (VSEPR) model predicts the shapes of molecules based on electron domain repulsion.
Electron Domains: Regions of electron density (bonds or lone pairs) around a central atom.
Electron-Group Geometry (EG): Arrangement of all electron domains.
Molecular Geometry (MG): Arrangement of only atoms (ignoring lone pairs).
Bond Angles: Determined by geometry (e.g., tetrahedral: 109.5°).
Polarity: Determined by shape and net dipole moment.
Example: CH4 is tetrahedral and nonpolar; NH3 is trigonal pyramidal and polar.
Valence Bond Theory
Valence bond theory explains covalent bonding as the overlap of atomic orbitals. Hybridization describes the mixing of atomic orbitals to form new, equivalent hybrid orbitals.
Hybridization:
sp: linear (2 domains)
sp2: trigonal planar (3 domains)
sp3: tetrahedral (4 domains)
σ (Sigma) Bonds: End-to-end overlap; all single bonds are σ bonds.
π (Pi) Bonds: Side-to-side overlap; present in double and triple bonds.
Delocalization: π bonds can be spread over multiple atoms (resonance).
Example: Ethene (C2H4) has sp2 hybridization and one σ and one π bond between the carbons.
Molecular Orbital (MO) Theory
MO theory describes bonding in terms of molecular orbitals formed from the combination of atomic orbitals. (Not tested on Unit 2 Exam, but may be on Final Exam.)