Skip to main content
Back

Molecular Geometry and Bonding Theories: Study Guide

Study Guide - Smart Notes

Tailored notes based on your materials, expanded with key definitions, examples, and context.

Molecular Geometry and Bonding Theories

Introduction to Molecular Shapes

The shape of a molecule is a fundamental aspect of its chemical properties and reactivity. While Lewis structures indicate the arrangement of atoms and electron pairs, they do not directly show the three-dimensional shape. Molecular geometry is determined by the arrangement of atoms and electron pairs around a central atom.

  • Lewis Structures: Used to predict molecular shapes by identifying bonding and lone pairs.

  • Common Shapes: Examples include linear, bent, trigonal planar, trigonal pyramidal, and tetrahedral.

  • Bond Angles: The angles between bonds are characteristic of each geometry.

  • Bond Lengths: The distances between nuclei of bonded atoms also influence molecular size.

Common molecular shapes for molecules with two or three atoms connected to a central atom

Valence-Shell Electron-Pair Repulsion (VSEPR) Model

The VSEPR model is used to predict the shape of molecules based on the repulsion between electron pairs. Electron pairs, whether bonding or nonbonding, arrange themselves as far apart as possible to minimize repulsion.

  • Electron Domains: Regions where electrons are located, including bonds and lone pairs.

  • VSEPR Principle: The best arrangement minimizes repulsions among electron domains.

  • Balloon Analogy: Visualizes electron domain repulsion.

Balloon analogy for electron domain repulsion

Electron-Domain Geometries

Electron-domain geometry is determined by counting the number of electron domains (lone pairs, single, double, and triple bonds) around the central atom. The geometry depends on the number of domains:

  • 2 Domains: Linear (180°)

  • 3 Domains: Trigonal planar (120°)

  • 4 Domains: Tetrahedral (109.5°)

  • 5 Domains: Trigonal bipyramidal (90°, 120°)

  • 6 Domains: Octahedral (90°)

Electron-domain geometries for two through six electron domains

Determining Molecular Geometry

To determine the molecular geometry:

  1. Draw the best Lewis structure.

  2. Determine the electron-domain geometry by counting all electron domains.

  3. Use the arrangement of bonded atoms to determine the molecular geometry.

Steps to determine molecular geometry for NH3

Linear Electron Domain

In the linear domain, the only molecular geometry is linear. If a molecule consists of only two atoms, it will always be linear.

  • Bond Angle: 180°

  • Example: CO2 (carbon dioxide)

Linear electron domain geometry

Trigonal Planar Electron Domain

For three electron domains, there are two possible molecular geometries:

  • Trigonal Planar: All domains are bonding pairs; bond angle is 120°.

  • Bent: One domain is a lone pair; bond angle is less than 120°.

Trigonal planar electron domain geometryBent molecular geometry in trigonal planar domain

Tetrahedral Electron Domain

For four electron domains, three molecular geometries are possible:

  • Tetrahedral: All domains are bonding pairs; bond angle is 109.5°.

  • Trigonal Pyramidal: One domain is a lone pair; bond angle is slightly less than 109.5°.

  • Bent: Two domains are lone pairs; bond angle is even smaller.

Tetrahedral electron domain geometryTrigonal pyramidal and bent molecular geometries

Effect of Nonbonding Pairs and Multiple Bonds on Bond Angles

Nonbonding pairs are physically larger than bonding pairs, causing greater repulsion and compressing bond angles. Double and triple bonds also exert greater repulsive force, increasing bond angles compared to single bonds.

  • Bonding vs. Nonbonding: Nonbonding pairs compress bond angles more than bonding pairs.

  • Multiple Bonds: Double/triple bonds increase bond angles.

Bonding and nonbonding electron pairsEffect of multiple bonds on bond angles

Expanding Beyond the Octet Rule

Some elements can have more than four electron domains, resulting in expanded octets. This leads to trigonal bipyramidal (five domains) and octahedral (six domains) geometries.

  • Trigonal Bipyramidal: Five electron domains; two distinct positions (axial and equatorial).

  • Octahedral: Six electron domains; all positions equivalent.

Trigonal bipyramidal geometry with axial and equatorial positionsOctahedral geometry

Molecular Geometries for Five and Six Electron Domains

For five electron domains (trigonal bipyramidal), possible molecular geometries include trigonal bipyramidal, seesaw, T-shaped, and linear. For six electron domains (octahedral), possible geometries are octahedral, square pyramidal, and square planar.

  • Trigonal Bipyramidal: Trigonal bipyramidal, seesaw, T-shaped, linear.

  • Octahedral: Octahedral, square pyramidal, square planar.

Trigonal bipyramidal molecular geometrySeesaw molecular geometryT-shaped molecular geometryLinear molecular geometry in trigonal bipyramidal domainSquare pyramidal molecular geometrySquare planar molecular geometry

Shapes of Larger Molecules

For larger molecules, the geometry about each atom is considered individually, rather than the molecule as a whole.

  • Local Geometry: Each atom's geometry is determined by its electron domains.

Local geometry in larger molecules

Polarity of Molecules

Molecular polarity depends on the nature of the bonds and the overall shape. If the bonds are polar and the dipole moments do not cancel, the molecule is polar.

  • Bond Dipole: Difference in electronegativity creates bond dipoles.

  • Overall Dipole Moment: If dipoles cancel, molecule is nonpolar; if not, molecule is polar.

Comparison of polarity in CO2 and H2O

Valence-Bond Theory

Valence-bond theory describes covalent bonding as the overlap of atomic orbitals. The shared space between two electrons of opposite spin forms a covalent bond.

  • Orbital Overlap: Covalent bonds form when atomic orbitals overlap.

  • Balance of Forces: Atoms approach until attractive and repulsive forces balance.

Orbital overlap in covalent bondingPotential energy curve for H-H bond formation

Hybridization and Hybrid Orbitals

Hybridization is the mixing of atomic orbitals to form new orbitals of equal energy (degenerate orbitals). The type of hybridization depends on the electron-domain geometry.

  • sp Hybridization: Linear geometry; mixing one s and one p orbital.

  • sp2 Hybridization: Trigonal planar geometry; mixing one s and two p orbitals.

  • sp3 Hybridization: Tetrahedral geometry; mixing one s and three p orbitals.

Beryllium orbital diagram before hybridizationBeryllium orbital diagram after hybridizationsp hybridization processsp hybrid orbitalsPosition of sp orbitalssp2 hybridization processsp3 hybridization processsp3 hybridization in water

Types of Bonds: Sigma and Pi Bonds

Single bonds are always sigma (σ) bonds, formed by head-to-head overlap. Multiple bonds contain one sigma bond and one or more pi (π) bonds, formed by sideways overlap.

  • Sigma (σ) Bond: Cylindrical symmetry about the internuclear axis.

  • Pi (π) Bond: Electron density above and below the internuclear axis.

Sigma and pi bonds

Localized and Delocalized Electrons

Bonding electrons shared between two atoms are localized. In molecules with resonance, some electrons are delocalized, shared by multiple atoms.

  • Localized Electrons: Shared between two atoms.

  • Delocalized Electrons: Shared among multiple atoms (e.g., benzene).

Molecular Orbital (MO) Theory

MO theory uses wave properties to describe electron energies in molecules. Molecular orbitals are formed from atomic orbitals and can be bonding or antibonding.

  • Bonding Orbitals: Constructive combinations; lower energy.

  • Antibonding Orbitals: Destructive combinations; higher energy, with a nodal plane.

  • MO Diagram: Shows how atomic orbitals combine to form molecular orbitals.

  • Bond Order:

Magnetism and MO Diagrams

Diamagnetism occurs when all electrons are spin-paired; paramagnetism occurs when there are unpaired electrons. MO diagrams can predict magnetic properties, such as the paramagnetism of O2.

  • Diamagnetic: All electrons paired; weakly repelled by magnetic field.

  • Paramagnetic: One or more unpaired electrons; attracted to magnetic field.

Heteronuclear Diatomic Molecules

MO diagrams for diatomic molecules with different elements reflect differences in atomic orbital energies. The more electronegative atom has lower energy orbitals, influencing the nature of bonding orbitals.

  • Energy Differences: Bonding orbitals resemble the more electronegative atom.

Summary Table: Electron-Domain and Molecular Geometries

The following table summarizes the electron-domain and molecular geometries for two through six electron domains:

Electron Domains

Electron-Domain Geometry

Molecular Geometry

Bond Angle

2

Linear

Linear

180°

3

Trigonal Planar

Trigonal Planar, Bent

120°, <120°

4

Tetrahedral

Tetrahedral, Trigonal Pyramidal, Bent

109.5°, <109.5°

5

Trigonal Bipyramidal

Trigonal Bipyramidal, Seesaw, T-shaped, Linear

90°, 120°, 180°

6

Octahedral

Octahedral, Square Pyramidal, Square Planar

90°

Additional info: Academic context and explanations have been expanded for clarity and completeness. Images included are strictly relevant to the adjacent content, reinforcing key concepts in molecular geometry and bonding theories.

Pearson Logo

Study Prep