BackPeriodic Properties, Chemical Bonding, and Lewis Structures: Study Notes
Study Guide - Smart Notes
Tailored notes based on your materials, expanded with key definitions, examples, and context.
Periodic Properties of the Elements
Classification of Elements
The periodic table organizes elements based on their properties. Elements are classified as metals, nonmetals, or metalloids, each with distinct physical and chemical characteristics.
Metals: Typically found on the left side of the periodic table. They are lustrous (shiny), good conductors of heat and electricity, opaque, malleable, and tend to lose electrons during chemical changes, forming cations (positively charged ions).
Nonmetals: Located on the right side (except hydrogen). They are dull, poor conductors, often transparent, brittle, and tend to gain electrons during chemical changes, forming anions (negatively charged ions).
Metalloids: Elements with properties intermediate between metals and nonmetals. They are semiconductors and are found along a 'ladder' from boron (B) to astatine (At).
Periods are horizontal rows; groups (or families) are vertical columns.
Element Families and Their Properties
Alkali Metals (Group 1A): Form +1 cations.
Alkaline Earth Metals (Group 2A): Form +2 cations.
Halogens (Group 7A): Form -1 anions.
Noble Gases (Group 8A): Chemically inert and unreactive.
Transition Metals (Groups 3-12): Exhibit variable charges depending on the compound.
Inner Transition Metals: Located between lanthanum/hafnium and actinium/rutherfordium.
Representative/Main Group Elements: Groups 1A-8A.
Trends in Atomic and Ionic Size
Atomic and ionic radii vary systematically across the periodic table due to changes in nuclear charge and electron configuration.
Atomic Radius: The distance from the nucleus to the outermost electron shell.
Vertical Trend: Atomic radius increases down a group due to the addition of electron shells.
Horizontal Trend: Atomic radius decreases across a period (left to right) as effective nuclear charge increases, pulling electrons closer.
Ionic Radius: Cations are smaller than their parent atoms; anions are larger. Isoelectronic species (same number of electrons) decrease in size with increasing nuclear charge.
Example: Arrange Na, Mg, and Al by increasing atomic radius: Al < Mg < Na (across a period, radius decreases).
Ionization Energy and Electron Affinity
These properties reflect how easily atoms lose or gain electrons.
Ionization Energy (IE): The energy required to remove an electron from a gaseous atom.
First Ionization Energy: Energy to remove the first electron.
Second Ionization Energy: Energy to remove a second electron after the first has been removed.
Trends: IE increases across a period and decreases down a group. Exceptions occur due to electron configurations (e.g., between groups 2A and 3A, or 5A and 6A).
Electron Affinity (EA): The energy change when an electron is added to a gaseous atom. Generally becomes more negative across a period.
Example: The large jump in successive ionization energies indicates removal of a core (not valence) electron.
Magnetic Properties
Paramagnetic: Atoms or ions with unpaired electrons; attracted to magnetic fields.
Diamagnetic: Atoms or ions with all electrons paired; weakly repelled by magnetic fields.
Valence Electrons and Chemical Properties
The number of valence electrons determines an element's chemical behavior.
Alkali Metals: 1 valence electron
Alkaline Earth Metals: 2 valence electrons
Halogens: 7 valence electrons
Oxygen Family: 6 valence electrons
Elements in the same group have similar chemical properties due to the same number of valence electrons.
Effective Nuclear Charge and Shielding
Effective Nuclear Charge (Zeff): The net positive charge experienced by valence electrons, accounting for shielding by inner electrons.
Shielding: Inner electrons reduce the attractive force between the nucleus and valence electrons.
Formula: where is the atomic number and is the number of inner (core) electrons.
Electron Configurations and Ions
Anions: Gain electrons; electron configuration adds electrons to the next available orbital.
Cations: Lose electrons; electrons are removed first from the highest principal quantum number (n) orbital.
Transition Metal Cations: Electrons are removed from the s orbital before the d orbital, even though the s orbital is filled first.
Example: Fe: [Ar] 4s2 3d6; Fe2+: [Ar] 3d6
Chemical Bonding
Types of Chemical Bonds
Chemical bonds are forces that hold atoms together in compounds. They form because atoms seek lower energy, often by achieving a stable electron configuration.
Ionic Bonds: Formed by the transfer of electrons from a metal to a nonmetal, resulting in oppositely charged ions that attract each other.
Covalent Bonds: Formed by the sharing of electrons between two nonmetals.
Example: NaCl (ionic), H2O (covalent)
Identifying Ions and Predicting Charges
Cations: Positively charged ions (metals lose electrons).
Anions: Negatively charged ions (nonmetals gain electrons).
Predictable Charges:
Group 1A: +1
Group 2A: +2
Group 6A: -2
Group 7A: -1
Aluminum: +3
Nitrogen: -3
Writing and Naming Ionic Compounds
Formulas: Combine cations and anions in ratios that yield a neutral compound.
Naming Binary Ionic Compounds: Name the cation first, then the anion (with -ide ending). For metals with variable charge, indicate the charge with Roman numerals.
Polyatomic Ions: Use the name of the polyatomic ion as is.
Common Polyatomic Ions:
Name | Formula | Charge |
|---|---|---|
Hydroxide | OH | -1 |
Cyanide | CN | -1 |
Phosphate | PO4 | -3 |
Nitrate | NO3 | -1 |
Carbonate | CO3 | -2 |
Bicarbonate | HCO3 | -1 |
Sulfate | SO4 | -2 |
Ammonium | NH4 | +1 |
Acetate | C2H3O2 | -1 |
Naming Molecular Compounds
Use prefixes to indicate the number of each atom: mono-, di-, tri-, tetra-, penta-, hexa-.
Example: CO2 is carbon dioxide; N2O4 is dinitrogen tetroxide.
Covalent Bonding and Lewis Structures
Electronegativity and Bond Polarity
Electronegativity is the ability of an atom to attract shared electrons in a bond. It increases across a period and decreases down a group.
Pure Covalent Bond: Equal sharing of electrons (e.g., H2).
Polar Covalent Bond: Unequal sharing; one atom attracts electrons more strongly (e.g., H2O).
Ionic Bond: Complete transfer of electrons (e.g., NaCl).
Bond Dipole: Represented by an arrow pointing toward the more electronegative atom.
Lewis Structures
Lewis structures represent the arrangement of valence electrons in molecules and ions.
Bonding Pair: Shared electrons between atoms (single, double, or triple bonds).
Lone Pair: Non-bonding electrons localized on a single atom.
Octet Rule: Atoms tend to have eight electrons in their valence shell (exceptions exist).
Procedure for Drawing Lewis Structures:
Count total valence electrons (add/subtract for ions).
Arrange atoms (central atom is usually least electronegative).
Connect atoms with single bonds.
Distribute remaining electrons to complete octets (or duets for H).
Form double/triple bonds if necessary to satisfy octet rule.
Resonance Structures
Some molecules cannot be represented by a single Lewis structure. Resonance structures are multiple valid Lewis structures for the same molecule. The actual structure is a resonance hybrid, an average of all resonance forms.
Resonance structures differ only in the placement of electrons, not atoms.
Not all resonance structures contribute equally; those with lower formal charges and full octets are more significant.
Formal Charge
Formal charge helps determine the most stable Lewis structure.
Formula:
The best Lewis structure minimizes formal charges and places negative charges on the most electronegative atoms.
Exceptions to the Octet Rule
Incomplete Octet: Some elements (e.g., Be, B) can have fewer than 8 electrons.
Odd-Electron Species: Molecules with an odd number of electrons (free radicals).
Expanded Octet: Elements in period 3 or higher can have more than 8 electrons (e.g., SF6).
Elements in period 2 (C, N, O, F, etc.) cannot have expanded octets.
Bond Order and Multiple Bonds
Single Bond: 2 electrons shared.
Double Bond: 4 electrons shared.
Triple Bond: 6 electrons shared.
Multiple bonds are shorter and stronger than single bonds.
Summary Table: Key Terms and Definitions
Term | Definition |
|---|---|
Atomic Radius | Distance from nucleus to outermost electron |
Ionization Energy | Energy required to remove an electron |
Electron Affinity | Energy change when an electron is added |
Electronegativity | Ability to attract shared electrons |
Paramagnetic | Contains unpaired electrons |
Diamagnetic | All electrons are paired |
Lewis Structure | Diagram showing valence electrons |
Resonance | Multiple valid Lewis structures |
Formal Charge | Apparent charge on an atom in a molecule |
Additional info: These notes synthesize and expand upon the provided outline, filling in academic context and definitions for clarity and completeness.