Skip to main content
Back

Stoichiometry and Limiting Reactant Practice – Step-by-Step Guidance

Study Guide - Smart Notes

Tailored notes based on your materials, expanded with key definitions, examples, and context.

Q1. How many grams of sodium sulfate will be formed if you start with 200 grams of sodium hydroxide and you have an excess of sulfuric acid?

Background

Topic: Stoichiometry – Mass-to-Mass Calculations

This question tests your ability to use a balanced chemical equation to convert from the mass of a reactant (NaOH) to the mass of a product (Na2SO4), using molar ratios.

Key Terms and Formulas

  • Stoichiometry: The calculation of reactants and products in chemical reactions.

  • Mole: A unit representing particles.

  • Molar Mass: The mass (in grams) of one mole of a substance.

  • Balanced Equation:

Key Formula:

Step-by-Step Guidance

  1. Start by calculating the number of moles of NaOH you have. Use the molar mass of NaOH ():

  2. Use the balanced equation to find the mole ratio between NaOH and Na2SO4. According to the equation, produces .

  3. Convert moles of Na2SO4 to grams using its molar mass ():

  4. Set up the full dimensional analysis chain, but stop before calculating the final value.

Try solving on your own before revealing the answer!

Final Answer: 355.1 g sodium sulfate

Using the setup above:

This is the mass of sodium sulfate produced when 200 g of NaOH reacts with excess sulfuric acid.

Q2. How many moles of lead (IV) nitrate will be needed to produce 175 grams of lithium nitrate, assuming excess lithium sulfate?

Background

Topic: Stoichiometry – Mass-to-Mole Calculations

This question tests your ability to use a balanced chemical equation to convert from the mass of a product (LiNO3) to the moles of a reactant (Pb(NO3)4), using molar ratios.

Key Terms and Formulas

  • Balanced Equation:

  • Molar Mass of LiNO3:

  • Mole Ratio:

Step-by-Step Guidance

  1. Calculate the number of moles of LiNO3 produced from 175 g:

  2. Use the balanced equation to find the mole ratio between LiNO3 and Pb(NO3)4:

  3. Set up the dimensional analysis chain, but stop before calculating the final value.

Try solving on your own before revealing the answer!

Final Answer: 1.27 mol Pb(NO3)4

mol LiNO3; mol Pb(NO3)4 needed.

This is the number of moles of lead(IV) nitrate required to produce 175 g of lithium nitrate.

Q3. How many moles of oxygen are needed to produce 1.5 moles of carbon dioxide in the combustion of cyclohexene?

Background

Topic: Stoichiometry – Mole-to-Mole Calculations

This question tests your ability to use a balanced chemical equation to convert from moles of one product (CO2) to moles of a reactant (O2).

Key Terms and Formulas

  • Balanced Equation:

  • Mole Ratio:

Step-by-Step Guidance

  1. Identify the mole ratio between O2 and CO2 from the balanced equation.

  2. Set up the conversion from moles of CO2 to moles of O2:

Try solving on your own before revealing the answer!

Final Answer: 2.1 mol O2

mol O2 are needed to produce 1.5 mol CO2.

Q4. How many grams of nitrogen would be required to react with 3.67 moles of fluorine?

Background

Topic: Stoichiometry – Mole-to-Mass Calculations

This question tests your ability to use a balanced chemical equation to convert from moles of a reactant (F2) to grams of another reactant (N2).

Key Terms and Formulas

  • Balanced Equation:

  • Mole Ratio:

  • Molar Mass of N2:

Step-by-Step Guidance

  1. Use the mole ratio from the balanced equation to convert moles of F2 to moles of N2:

  2. Convert moles of N2 to grams using its molar mass:

  3. Set up the full dimensional analysis chain, but stop before calculating the final value.

Try solving on your own before revealing the answer!

Final Answer: 34.3 g N2

g N2 required to react with 3.67 mol F2.

Q5a. Suppose that 233 grams of copper react with 188 grams of sulfur. Which reactant is limiting, which is in excess, and what is the theoretical yield of copper(I) sulfide?

Background

Topic: Limiting Reactant and Theoretical Yield

This question tests your ability to determine the limiting reactant in a reaction and calculate the theoretical yield of a product.

Key Terms and Formulas

  • Limiting Reactant: The reactant that is completely consumed first, limiting the amount of product formed.

  • Theoretical Yield: The maximum amount of product that can be formed from the limiting reactant.

  • Balanced Equation:

  • Molar Masses: Cu = , S = , Cu2S =

Step-by-Step Guidance

  1. Calculate moles of Cu and S you have:

  2. Use the balanced equation to determine how many moles of S are needed to react with all the Cu you have:

  3. Compare the moles of S you have to the moles needed. The reactant that runs out first is the limiting reactant.

  4. Use the limiting reactant to calculate the theoretical yield of Cu2S:

    (if Cu is limiting) or (if S is limiting)

  5. Convert moles of Cu2S to grams using its molar mass.

Try solving on your own before revealing the answer!

Final Answer:

Limiting Reactant: Cu

Excess Reactant: S

Theoretical Yield: 292 g Cu2S

Calculations show that Cu runs out first, and using its amount, the maximum Cu2S that can be formed is 292 g.

Q5b. If the actual yield of copper(I) sulfide is 274.8 grams, what is the percent yield?

Background

Topic: Percent Yield

This question tests your ability to calculate the percent yield of a reaction, comparing actual and theoretical yields.

Key Terms and Formulas

  • Percent Yield:

Step-by-Step Guidance

  1. Identify the actual yield (given) and the theoretical yield (from part a).

  2. Plug these values into the percent yield formula:

  3. Set up the calculation, but stop before computing the final value.

Try solving on your own before revealing the answer!

Final Answer: 94.1%

The percent yield is .

Q5c. If the percent yield is 55.7%, what is the actual yield of copper(I) sulfide?

Background

Topic: Percent Yield – Solving for Actual Yield

This question tests your ability to rearrange the percent yield formula to solve for actual yield.

Key Terms and Formulas

  • Percent Yield:

Step-by-Step Guidance

  1. Rearrange the percent yield formula to solve for actual yield:

  2. Plug in the percent yield (as a percentage) and the theoretical yield (from part a).

Try solving on your own before revealing the answer!

Final Answer: 162.7 g Cu2S

The actual yield is g Cu2S (rounded to 163 g as appropriate for sig figs).

Q6a. When 200.0 mL of a 0.50 M solution of Copper (II) chloride reacts with 9.8 g of Aluminum metal, determine which reactant is the limiting reagent.

Background

Topic: Limiting Reactant – Solution Stoichiometry

This question tests your ability to determine the limiting reactant when one reactant is in solution (molarity and volume) and the other is a solid (mass).

Key Terms and Formulas

  • Molarity ():

  • Balanced Equation:

  • Molar Mass of Al:

Step-by-Step Guidance

  1. Calculate moles of CuCl2 in solution:

  2. Calculate moles of Al from mass:

  3. Use the balanced equation to determine how much Al is needed to react with all the CuCl2:

  4. Compare the moles of Al you have to the moles needed. The reactant that runs out first is the limiting reactant.

Try solving on your own before revealing the answer!

Final Answer: Limiting Reactant is CuCl2

CuCl2 is the limiting reactant because you have more than enough Al to react with all the CuCl2 present.

Q6b. Based on your answer to part a, calculate the theoretical yield of copper metal, in grams.

Background

Topic: Theoretical Yield – Solution Stoichiometry

This question tests your ability to use the limiting reactant to calculate the maximum amount of product (Cu) that can be formed.

Key Terms and Formulas

  • Balanced Equation:

  • Molar Mass of Cu:

Step-by-Step Guidance

  1. Use the moles of limiting reactant (CuCl2) from part a.

  2. Use the mole ratio from the balanced equation to find moles of Cu produced:

  3. Convert moles of Cu to grams using its molar mass:

Try solving on your own before revealing the answer!

Final Answer: 6.4 g Cu

0.1 mol CuCl2 produces 0.1 mol Cu, which is g Cu.

Q6c. In the lab, a student produced 4.98 g of copper metal. Calculate the percent yield of copper.

Background

Topic: Percent Yield

This question tests your ability to calculate the percent yield of a product based on actual and theoretical yields.

Key Terms and Formulas

  • Percent Yield:

Step-by-Step Guidance

  1. Identify the actual yield (given) and the theoretical yield (from part b).

  2. Plug these values into the percent yield formula:

Try solving on your own before revealing the answer!

Final Answer: 77.8%

The percent yield is .

Q6d. What mass of the excess reagent (Al) remains after the reaction reaches completion?

Background

Topic: Excess Reactant Calculation

This question tests your ability to determine how much of the excess reactant is left after the limiting reactant is used up.

Key Terms and Formulas

  • Excess Reactant: The reactant that is not completely consumed in the reaction.

Step-by-Step Guidance

  1. Calculate the amount of Al that actually reacted (from part a).

  2. Subtract the amount of Al used from the initial amount to find the mass remaining:

Try solving on your own before revealing the answer!

Final Answer: 8.0 g Al

9.8 g Al (initial) - 1.8 g Al (used) = 8.0 g Al remains after the reaction.

Pearson Logo

Study Prep