Skip to main content
Back

Stoichiometry and Limiting Reactant Practice – Step-by-Step Guidance

Study Guide - Smart Notes

Tailored notes based on your materials, expanded with key definitions, examples, and context.

Q1. How many grams of sodium sulfate will be formed if you start with 200 grams of sodium hydroxide and you have an excess of sulfuric acid?

Background

Topic: Stoichiometry – Mass-to-Mass Calculations

This question tests your ability to use a balanced chemical equation to convert from the mass of a reactant (NaOH) to the mass of a product (Na2SO4), using molar masses and mole ratios.

Key Terms and Formulas

  • Stoichiometry: The calculation of reactants and products in chemical reactions.

  • Molar mass: The mass of one mole of a substance (g/mol).

  • Mole ratio: The ratio between the amounts in moles of any two compounds involved in a chemical reaction.

Balanced equation:

Step-by-Step Guidance

  1. Start by converting the given mass of NaOH to moles using its molar mass:

  2. Use the balanced equation to set up the mole ratio between NaOH and Na2SO4:

    So,

  3. Convert moles of Na2SO4 to grams using its molar mass (142.04 g/mol):

  4. Set up the calculation, but stop before multiplying out the final value.

Try solving on your own before revealing the answer!

Final Answer: 355.1 g sodium sulfate

So, 355.1 grams of sodium sulfate will be formed.

Q2. How many moles of lead (IV) nitrate will be needed to produce 175 grams of lithium nitrate, assuming excess lithium sulfate?

Background

Topic: Stoichiometry – Mass-to-Mole Calculations

This question tests your ability to convert from the mass of a product (LiNO3) to the moles of a reactant (Pb(NO3)4) using a balanced equation and mole ratios.

Key Terms and Formulas

  • Molar mass: The mass of one mole of a substance (g/mol).

  • Mole ratio: The ratio from the balanced equation.

Balanced equation:

Step-by-Step Guidance

  1. Convert the given mass of LiNO3 to moles using its molar mass (68.95 g/mol):

  2. Use the balanced equation to find the mole ratio between LiNO3 and Pb(NO3)4:

    So,

  3. Set up the calculation for moles of Pb(NO3)4, but do not compute the final value yet.

Try solving on your own before revealing the answer!

Final Answer: 1.27 mol Pb(NO3)4

So, 1.27 moles of lead (IV) nitrate are needed.

Q3. How many moles of oxygen are needed to produce 1.5 moles of carbon dioxide in the combustion of C6H10?

Background

Topic: Stoichiometry – Mole-to-Mole Calculations

This question tests your ability to use mole ratios from a balanced equation to convert between moles of product and moles of reactant.

Key Terms and Formulas

  • Mole ratio: The ratio of coefficients from the balanced equation.

Balanced equation:

Step-by-Step Guidance

  1. Identify the mole ratio between CO2 and O2 from the balanced equation:

  2. Set up the conversion from moles of CO2 to moles of O2:

  3. Stop here and let the student perform the calculation.

Try solving on your own before revealing the answer!

Final Answer: 2.1 mol O2

So, 2.1 moles of oxygen are needed to produce 1.5 moles of carbon dioxide.

Q4. How many grams of nitrogen would be required to react with 3.67 moles of fluorine in the reaction N2 + 3 F2 → 2 NF3?

Background

Topic: Stoichiometry – Mole-to-Mass Calculations

This question tests your ability to convert from moles of one reactant (F2) to grams of another reactant (N2) using the balanced equation and molar mass.

Key Terms and Formulas

  • Mole ratio: The ratio of coefficients from the balanced equation.

  • Molar mass of N2: 28.02 g/mol

Balanced equation:

Step-by-Step Guidance

  1. Use the mole ratio from the balanced equation to convert moles of F2 to moles of N2:

  2. Convert moles of N2 to grams using its molar mass:

  3. Set up the calculation, but do not multiply out the final value yet.

Try solving on your own before revealing the answer!

Final Answer: 34.3 g N2

So, 34.3 grams of nitrogen are required.

Q5a. Suppose that 233 grams of copper react with 188 grams of sulfur. Which reactant is limiting, which is in excess, and what is the theoretical yield of copper(I) sulfide?

Background

Topic: Limiting Reactant and Theoretical Yield

This question tests your ability to determine the limiting reactant, the excess reactant, and calculate the theoretical yield in a reaction.

Key Terms and Formulas

  • Limiting reactant: The reactant that is completely consumed first, limiting the amount of product formed.

  • Theoretical yield: The maximum amount of product that can be formed from the limiting reactant.

  • Molar mass: Cu = 63.55 g/mol, S = 32.06 g/mol, Cu2S = 159.16 g/mol

Balanced equation:

Step-by-Step Guidance

  1. Convert the mass of each reactant to moles:

  2. Use the balanced equation to determine how many moles of S are needed to react with all the Cu:

    Calculate moles of S required for the given moles of Cu.

  3. Compare the moles of S you have to the moles required. The reactant that runs out first is the limiting reactant.

  4. Use the limiting reactant to calculate the theoretical yield of Cu2S:

    Convert moles of limiting reactant to moles of Cu2S using the balanced equation, then to grams using the molar mass.

  5. Set up the calculation for theoretical yield, but do not compute the final value yet.

Try solving on your own before revealing the answer!

Final Answer:

Limiting Reactant = Cu

Excess Reactant = S

Theoretical Yield = 292 g Cu2S

Calculations:

Cu is limiting because you need mol S, and you have more than that.

Q5b. In the laboratory you actually produced a mass of 274.8 grams of copper(I) sulfide. What is the percent yield of this experiment?

Background

Topic: Percent Yield

This question tests your ability to calculate percent yield from actual and theoretical yields.

Key Terms and Formulas

  • Percent yield:

Step-by-Step Guidance

  1. Identify the actual yield (given) and the theoretical yield (from part a).

  2. Set up the percent yield formula:

  3. Plug in the values, but do not calculate the final percent yet.

Try solving on your own before revealing the answer!

Final Answer: 94.1%

The percent yield is 94.1%.

Q5c. Using the theoretical yield from part a, determine the actual yield of copper(I) sulfide if the percent yield in a different trial was only 55.7%?

Background

Topic: Percent Yield – Solving for Actual Yield

This question tests your ability to rearrange the percent yield formula to solve for actual yield.

Key Terms and Formulas

  • Percent yield:

Step-by-Step Guidance

  1. Write the percent yield formula and rearrange to solve for actual yield:

  2. Plug in the percent yield (as a percentage) and the theoretical yield from part a.

  3. Set up the calculation, but do not compute the final value yet.

Try solving on your own before revealing the answer!

Final Answer: 162.6 g Cu2S

The actual yield is 162.6 grams of copper(I) sulfide.

Q6a. When 200.0 mL of a 0.50 M solution of Copper(II) chloride reacts with 9.8 g of Aluminum metal, determine which reactant is the limiting reagent.

Background

Topic: Limiting Reactant in Solution Reactions

This question tests your ability to use molarity and volume to find moles, and then determine the limiting reactant using stoichiometry.

Key Terms and Formulas

  • Molarity (M):

  • Limiting reactant: The reactant that is used up first.

  • Molar mass of Al: 26.98 g/mol

Balanced equation:

Step-by-Step Guidance

  1. Calculate moles of CuCl2 using molarity and volume:

  2. Calculate moles of Al from mass:

  3. Use the balanced equation to determine how much Al is needed to react with all the CuCl2:

  4. Compare the amount of Al needed to the amount available to determine the limiting reactant.

Try solving on your own before revealing the answer!

Final Answer: CuCl2 is the limiting reactant

0.10 mol CuCl2 needs 0.067 mol Al (1.8 g), but you have 9.8 g Al (0.363 mol), so CuCl2 is limiting.

Q6b. Based on your answer to part a, calculate the theoretical yield of copper metal, in grams.

Background

Topic: Theoretical Yield from Limiting Reactant

This question tests your ability to use the limiting reactant to calculate the maximum amount of product formed.

Key Terms and Formulas

  • Theoretical yield: Maximum amount of product from limiting reactant.

  • Molar mass of Cu: 63.55 g/mol

Balanced equation:

Step-by-Step Guidance

  1. Use the moles of limiting reactant (CuCl2) to find moles of Cu produced:

  2. Convert moles of Cu to grams using its molar mass:

  3. Set up the calculation, but do not compute the final value yet.

Try solving on your own before revealing the answer!

Final Answer: 6.4 g Cu

The theoretical yield is 6.4 grams of copper.

Q6c. In the lab, a student produced 4.98 g of copper metal. Calculate the percent yield of copper.

Background

Topic: Percent Yield

This question tests your ability to calculate percent yield from actual and theoretical yields.

Key Terms and Formulas

  • Percent yield:

Step-by-Step Guidance

  1. Identify the actual yield (given) and the theoretical yield (from part b).

  2. Set up the percent yield formula:

  3. Plug in the values, but do not calculate the final percent yet.

Try solving on your own before revealing the answer!

Final Answer: 77.8%

The percent yield is 77.8%.

Q6d. What mass of the excess reagent (Al) remains after the reaction reaches completion?

Background

Topic: Excess Reactant Calculation

This question tests your ability to determine how much of the excess reactant is left after the reaction is complete.

Key Terms and Formulas

  • Excess reactant: The reactant that is not completely used up in the reaction.

Step-by-Step Guidance

  1. Calculate the amount of Al needed to react with all the CuCl2 (from part a).

  2. Subtract the amount of Al used from the amount you started with to find the excess.

  3. Set up the subtraction, but do not compute the final value yet.

Try solving on your own before revealing the answer!

Final Answer: 8.0 g Al remains

9.8 g Al (initial) – 1.8 g Al (used) = 8.0 g Al (excess)

So, 8.0 grams of aluminum remain after the reaction.

Pearson Logo

Study Prep