Skip to main content
Ch 25: Current, Resistance, and EMF
Young & Freedman Calc - University Physics 14th Edition
Young & Freedman Calc14th EditionUniversity PhysicsISBN: 9780321973610Non è quello che usi tu?Cambia libro di testo
Tutti i libri di testoYoung & Freedman Calc 14th EditionCh 25: Current, Resistance, and EMFProblema 25b
Capitolo 25, Problema 25b

A copper transmission cable 100100 km long and 10.010.0 cm in diameter carries a current of 125125 A. How much electrical energy is dissipated as thermal energy every hour?

Guida verificata passo dopo passo
1
First, calculate the resistance of the copper cable using the formula for resistance: \( R = \frac{\rho L}{A} \), where \( \rho \) is the resistivity of copper, \( L \) is the length of the cable, and \( A \) is the cross-sectional area. The resistivity of copper is approximately \( 1.68 \times 10^{-8} \ \Omega \cdot m \).
Determine the cross-sectional area \( A \) of the cable using the formula for the area of a circle: \( A = \pi r^2 \), where \( r \) is the radius of the cable. Given the diameter is 10.0 cm, convert it to meters and find the radius.
Substitute the values of \( \rho \), \( L \), and \( A \) into the resistance formula to find the resistance \( R \) of the cable.
Use the power dissipation formula \( P = I^2 R \) to calculate the power dissipated as thermal energy, where \( I \) is the current flowing through the cable.
Finally, calculate the total energy dissipated over one hour by multiplying the power \( P \) by the time in seconds (1 hour = 3600 seconds) using the formula \( E = P \times t \).

Risposta video verificata per un problema simile:

Questa soluzione video è stata consigliata dai nostri tutor come utile per risolvere questo problema.
Durata del video:
7m

Concetti chiave

Ecco i concetti essenziali che devi comprendere per rispondere correttamente alla domanda.

Electrical Resistance

Electrical resistance is a measure of the opposition to the flow of electric current through a conductor. It depends on the material's resistivity, length, and cross-sectional area. For a copper cable, resistance can be calculated using the formula R = ρL/A, where ρ is the resistivity, L is the length, and A is the cross-sectional area.
Video consigliato:
Percorso guidato
05:43
Electric Flux

Joule's Law

Joule's Law relates the power dissipated in a resistor to the current flowing through it and its resistance. It is given by the formula P = I²R, where P is the power, I is the current, and R is the resistance. This law helps determine the thermal energy produced due to the resistance in the cable.
Video consigliato:
Percorso guidato
08:04
The First Law of Thermodynamics

Energy Dissipation

Energy dissipation in electrical systems refers to the conversion of electrical energy into thermal energy due to resistance. The energy dissipated over time can be calculated using the formula E = Pt, where E is the energy, P is the power, and t is the time. This concept is crucial for understanding how much energy is lost as heat in the cable over a given period.
Video consigliato:
Percorso guidato
04:10
Intro to Energy & Types of Energy
Pratica correlata
Domanda del libro di testo

A hollow aluminum cylinder is 2.502.50 m long and has an inner radius of 2.752.75 cm and an outer radius of 4.604.60 cm. Treat each surface (inner, outer, and the two end faces) as an equipotential surface. At room temperature, what will an ohmmeter read if it is connected between (a) the opposite faces and (b) the inner and outer surfaces?

1596
views
Domanda del libro di testo

A ductile metal wire has resistance RR. What will be the resistance of this wire in terms of RR if it is stretched to three times its original length, assuming that the density and resistivity of the material do not change when the wire is stretched? (Hint: The amount of metal does not change, so stretching out the wire will affect its cross-sectional area.)

2322
views
Domanda del libro di testo

An idealized ammeter is connected to a battery as shown in Fig. E25.2825.28. Find the reading of the ammeter.

2581
views
Domanda del libro di testo

An idealized ammeter is connected to a battery as shown in Fig. E25.2825.28. Find the terminal voltage of the battery.

1813
views
Domanda del libro di testo

An idealized ammeter is connected to a battery as shown in Fig. E25.2825.28. Find the current through the 4.004.00-Ω\(\Omega\) resistor.

2106
views
Domanda del libro di testo

What is the resistance of a carbon rod at 25.825.8°C if its resistance is 0.0160Ω0.0160 Ω at 0.00.0°C?

1894
views