Ch 25: Current, Resistance, and EMF

Young & Freedman Calc - University Physics 14th Edition

Young & Freedman Calc14th EditionUniversity PhysicsISBN: 9780321973610Non è quello che usi tu?Cambia libro di testo

Young & Freedman Calc 14th Edition

Ch 25: Current, Resistance, and EMF

Problema 22

Capitolo 25, Problema 22

A hollow aluminum cylinder is $2.50$ m long and has an inner radius of $2.75$ cm and an outer radius of $4.60$ cm. Treat each surface (inner, outer, and the two end faces) as an equipotential surface. At room temperature, what will an ohmmeter read if it is connected between (a) the opposite faces and (b) the inner and outer surfaces?

Guida verificata passo dopo passo

First, understand that the problem involves calculating the resistance of a hollow aluminum cylinder. The resistance can be calculated using the formula:

R = \frac{ρ L}{A}

, where

ρ

is the resistivity of aluminum,

L

is the length of the cylinder, and

A

is the cross-sectional area through which current flows.

For part (a), calculate the resistance between the opposite faces. The cross-sectional area

A

is the area of the annular ring formed by the outer and inner radii. Use the formula for the area of an annular ring:

A = π (r^{2} - r^{1})

, where

r^{2}

is the outer radius and

r^{1}

is the inner radius.

Substitute the values for the radii and length into the resistance formula for part (a). Convert the radii from centimeters to meters before substituting:

R = \frac{ρ \times 2.50}{π ((0.046)^{2} - (0.0275)^{2})}

For part (b), calculate the resistance between the inner and outer surfaces. Here, the current flows radially through the cylindrical shell. The resistance formula for radial flow is:

R = \frac{ρ \times L}{π \times (r^{2} - r^{1})}

, where

L

is the length of the cylinder.

Substitute the values for the radii and length into the resistance formula for part (b). Again, ensure the radii are in meters:

R = \frac{ρ \times 2.50}{π \times (0.046 - 0.0275)}

Risposta video verificata per un problema simile:

Questa soluzione video è stata consigliata dai nostri tutor come utile per risolvere questo problema.

Durata del video:

11m

Concetti chiave

Ecco i concetti essenziali che devi comprendere per rispondere correttamente alla domanda.

Resistance in Cylindrical Conductors

The resistance of a cylindrical conductor depends on its length, cross-sectional area, and the material's resistivity. For a hollow cylinder, the cross-sectional area is the difference between the outer and inner areas. The formula R = ρL/A, where ρ is resistivity, L is length, and A is cross-sectional area, is used to calculate resistance.

Video consigliato:

Percorso guidato

07:43

Electric Fields in Conductors

Equipotential Surfaces

Equipotential surfaces are surfaces where the electric potential is constant. In this problem, the inner, outer, and end faces of the cylinder are equipotential, meaning no potential difference exists across these surfaces. This concept is crucial for understanding how current flows and how resistance is measured in different configurations.

Video consigliato:

Percorso guidato

09:18

Equipotential Surfaces

Ohm's Law

Ohm's Law states that the current through a conductor between two points is directly proportional to the voltage across the two points and inversely proportional to the resistance, expressed as V = IR. This principle is essential for determining the readings of an ohmmeter, which measures resistance by applying a known voltage and measuring the resulting current.

Video consigliato:

Percorso guidato

03:07

Resistance and Ohm's Law

Pratica correlata

Domanda del libro di testo

A copper transmission cable $100$ km long and $10.0$ cm in diameter carries a current of $125$ A. How much electrical energy is dissipated as thermal energy every hour?

2090

views

Domanda del libro di testo

A ductile metal wire has resistance $R$ . What will be the resistance of this wire in terms of $R$ if it is stretched to three times its original length, assuming that the density and resistivity of the material do not change when the wire is stretched? (Hint: The amount of metal does not change, so stretching out the wire will affect its cross-sectional area.)

2322

views

Domanda del libro di testo

An idealized ammeter is connected to a battery as shown in Fig. E $25.28$ . Find the reading of the ammeter.

2581

views

Domanda del libro di testo

In household wiring, copper wire $2.05$ mm in diameter is often used. Find the resistance of a $24.0$ -m length of this wire.

1901

views

Domanda del libro di testo

A cylindrical tungsten filament $15.0$ cm long with a diameter of $1.00$ mm is to be used in a machine for which the temperature will range from room temperature ( $20$ °C) up to $120$ °C. It will carry a current of $12.5$ A at all temperatures. What will be the maximum potential drop over the full length of the filament?

1816

views

Domanda del libro di testo

What is the resistance of a carbon rod at $25.8$ °C if its resistance is $0.0160 Omega$ at $0.0$ °C?

1894

views