Your artist friend is designing an exhibit inspired by circular-aperture diffraction. A pinhole in a red zone is going to be illuminated with a red laser beam of wavelength 670 nm, while a pinhole in a violet zone is going to be illuminated with a violet laser beam of wavelength 410 nm. She wants all the diffraction patterns seen on a distant screen to have the same size. For this to work, what must be the ratio of the red pinhole’s diameter to that of the violet pinhole?

검증된 단계별 안내

Understand the concept of circular-aperture diffraction: The size of the diffraction pattern is determined by the angular width of the central maximum, which depends on the wavelength of the light and the diameter of the aperture.

Recall the formula for the angular width of the central maximum in circular-aperture diffraction: \( \theta = 1.22 \frac{\lambda}{D} \), where \( \lambda \) is the wavelength of the light and \( D \) is the diameter of the aperture.

To ensure the diffraction patterns have the same size, the angular width \( \theta \) must be the same for both the red and violet beams. Set the angular widths equal: \( 1.22 \frac{\lambda_{\text{red}}}{D_{\text{red}}} = 1.22 \frac{\lambda_{\text{violet}}}{D_{\text{violet}}} \).

Simplify the equation by canceling the constant \( 1.22 \): \( \frac{\lambda_{\text{red}}}{D_{\text{red}}} = \frac{\lambda_{\text{violet}}}{D_{\text{violet}}} \). Rearrange to find the ratio of the diameters: \( \frac{D_{\text{red}}}{D_{\text{violet}}} = \frac{\lambda_{\text{red}}}{\lambda_{\text{violet}}} \).

Substitute the given wavelengths: \( \lambda_{\text{red}} = 670 \, \text{nm} \) and \( \lambda_{\text{violet}} = 410 \, \text{nm} \). The ratio of the diameters is \( \frac{D_{\text{red}}}{D_{\text{violet}}} = \frac{670}{410} \).

비슷한 문제에 대한 검증된 영상 답변:

이 영상 해법은 위 문제에 도움이 된다고 튜터들이 추천한 것입니다.

영상 길이:

도움이 되었나요?

주요 개념

질문에 올바르게 답하기 위해 반드시 이해해야 하는 핵심 개념들은 다음과 같습니다.

Diffraction

Diffraction is the bending of waves around obstacles and the spreading of waves when they pass through small openings. In the context of light, diffraction patterns arise when coherent light sources, like lasers, pass through apertures, creating interference patterns on a screen. The extent of diffraction is influenced by the wavelength of the light and the size of the aperture.

Wavelength and Aperture Size

The wavelength of light is a critical factor in determining the diffraction pattern produced by an aperture. According to the principles of diffraction, a smaller aperture size relative to the wavelength results in more pronounced diffraction. To achieve similar diffraction patterns for different wavelengths, the ratio of the diameters of the apertures must be adjusted based on their respective wavelengths.

Ratio of Aperture Diameters

To ensure that diffraction patterns from two different wavelengths appear the same size on a screen, the ratio of the diameters of the apertures must be inversely proportional to the ratio of the wavelengths. This means that if one wavelength is longer, its corresponding aperture must be smaller to maintain the same diffraction pattern size, allowing for a direct comparison of the two patterns.