Q: A microbiologist is using a compound light microscope with a 40× objective lens and a 10× ocular lens. What is the total magnification, and which formula should be used to calculate it?

The total magnification is 400×, calculated using $$\text{Total Magnification} = \text{Objective Magnification} \times \text{Ocular Magnification}$$

Question 1

A microbiologist is using a compound light microscope with a 40× objective lens and a 10× ocular lens. What is the total magnification, and which formula should be used to calculate it?

Accepted Answer

The total magnification is 400×, calculated using $$	ext{Total Magnification} = 	ext{Objective Magnification} 	imes 	ext{Ocular Magnification}$$

Question 2

Which of the following best explains why immersion oil is used with the 100× objective lens in light microscopy?

Accepted Answer

Immersion oil has the same refractive index as glass, reducing light refraction and increasing resolution at high magnification.

Question 3

A scientist wants to observe the three-dimensional surface structure of a virus particle. Which microscopy technique should they use and why?

Accepted Answer

Scanning electron microscopy (SEM), because it provides detailed three-dimensional images of surface structures.

Question 4

Which of the following statements about the Gram stain is correct?

Accepted Answer

Gram-positive bacteria retain the crystal violet–iodine complex after decolorization due to their thick peptidoglycan layer.

Question 5

A clinical sample is suspected to contain Mycobacterium tuberculosis. Which staining technique should be used for rapid identification, and what is the key feature of this method?

Accepted Answer

Acid-fast stain, which detects bacteria with waxy cell walls that retain carbolfuchsin even after acid-alcohol decolorization.

Question 6

Which of the following best describes the principle behind phase-contrast microscopy?

Accepted Answer

It uses differences in refractive index to convert phase shifts in light passing through a transparent specimen into differences in light intensity.

Question 7

A researcher wants to track the movement of a single protein molecule inside a living cell. Which microscopy technique is most appropriate for this purpose?

Accepted Answer

Super-resolution light microscopy, which can track single molecules using fluorescent dyes and laser scanning.

Question 8

Which of the following is a key advantage of two-photon microscopy over confocal microscopy?

Accepted Answer

It can image living cells in tissues up to 1 mm deep using long-wavelength light, reducing photodamage.

Question 9

Which of the following best explains why negative staining is useful for observing bacterial capsules?

Accepted Answer

Acidic dyes stain the background, leaving the capsule as a clear halo around the cell, minimizing distortion.

Question 10

A sample contains a mixture of bacteria, some with thick peptidoglycan walls and others with thin peptidoglycan and an outer membrane. After Gram staining, what colors will these two groups appear, and why?

Accepted Answer

Thick-walled bacteria will appear purple (gram-positive) because they retain the crystal violet–iodine complex; thin-walled bacteria will appear pink (gram-negative) because they lose the complex and are counterstained by safranin.

Question 11

Which of the following statements about electron microscopy is correct?

Accepted Answer

Electron microscopes use electromagnetic lenses and electron beams, allowing for much higher resolution than light microscopes due to the shorter wavelength of electrons.

Question 12

A laboratory technician is preparing a bacterial smear for staining. Which of the following steps is necessary to ensure the bacteria adhere to the slide and are not washed away during staining?

Accepted Answer

Fixing the smear by passing it through a flame or covering it with methanol.

Question 13

Which of the following best describes the function of a mordant in staining procedures?

Accepted Answer

A mordant increases the affinity of a stain for a biological specimen, sometimes by forming a complex with the dye.

Question 14

A pathologist needs to visualize endospores in a sample of Clostridium. Which staining method should be used, and what is the expected result?

Accepted Answer

Schaeffer-Fulton endospore stain; endospores will appear green and the rest of the cell will appear red or pink.

Question 15

Which of the following is a limitation of the Gram stain technique?

Accepted Answer

Some bacteria stain poorly or not at all, and the reaction is most consistent with young, growing bacteria.

Question 16

A sample is stained with fluorescein isothiocyanate (FITC) and observed under a fluorescence microscope. What is the most likely reason for using this technique?

Accepted Answer

To rapidly identify specific microorganisms, such as Bacillus anthracis, by making them fluoresce under ultraviolet light.

Question 17

Which of the following best explains why the resolving power of a microscope increases as the wavelength of light decreases?

Accepted Answer

Shorter wavelengths can distinguish between points that are closer together, as described by $$d = \frac{\lambda}{2NA}$$, where $$d is $$the minimum resolvable distance, $$\lambda is $$the wavelength, and $$NA is $$the numerical aperture.

Question 18

A scientist is using a scanning tunneling microscope (STM) to study a biological sample. What is a unique advantage of STM compared to electron microscopy?

Accepted Answer

STM can resolve features as small as individual atoms without requiring special specimen preparation.

Question 19

Which of the following best describes the difference between positive and negative staining in electron microscopy?

Accepted Answer

Positive staining fixes heavy metals onto the specimen, while negative staining increases the electron opacity of the surrounding field.

Observing Microorganisms Through a Microscope: Microscopy and Staining Techniques

Study Guide - Practice Questions

Study Guide - Flashcards