Skip to main content
Back

Physical and Chemical Control of Microbes: Study Notes

Study Guide - Smart Notes

Tailored notes based on your materials, expanded with key definitions, examples, and context.

Controlling Microbial Growth

Section 11.1: Controlling Microorganisms

Microbial control is essential in healthcare, food safety, and laboratory settings. Various physical and chemical methods are used to reduce or eliminate microorganisms, each with specific applications and limitations.

  • -cidal vs. -static Agents:

    • -cidal agents (e.g., bactericidal, fungicidal, virucidal, sporicidal) kill microorganisms.

    • -static agents (e.g., bacteriostatic, fungistatic, microbistatic) inhibit growth but do not kill microbes directly.

  • Microbial Death: Defined as the permanent loss of reproductive capability, even under optimum growth conditions.

  • Factors Influencing Microbial Death:

    • Number and type of microbes present

    • Concentration and mode of action of the agent

    • Presence of organic matter

    • Duration of exposure

  • Physical vs. Chemical Control:

    • Physical methods: Heat, radiation, filtration, desiccation, osmotic pressure

    • Chemical methods: Disinfectants, antiseptics, sterilants, sanitizers

  • Desirable Qualities in Chemical Agents:

    • Rapid action in low concentrations

    • Broad-spectrum microbicidal action

    • Non-toxic to humans and animals

    • Stability and solubility

    • Penetration and persistence

    • Noncorrosive, nonstaining, affordable

  • Historical Methods: Salting, smoking, pickling, drying, sunlight exposure, burning, storing in copper/silver containers

Definitions

  • Sterilization: Destroys or removes all viable microorganisms, including viruses and endospores. Essential for surgical instruments, syringes, and some foods.

  • Disinfection: Destroys vegetative pathogens (not endospores) on inanimate objects. Also removes toxins.

  • Antisepsis: Application of chemical agents to living tissue to destroy or inhibit vegetative pathogens.

  • Decontamination (Sanitization): Mechanical removal of microbes to safe levels. Sanitizers are soaps or detergents used for this purpose.

Cellular Targets of Control Agents

  • Cell Wall: Disrupted by detergents and alcohols, leading to cell lysis.

  • Cell Membrane: Surfactants and detergents disrupt membrane integrity, causing loss of selective permeability.

  • Cellular Synthetic Processes (DNA/RNA): Radiation and chemicals interfere with DNA replication, transcription, or protein synthesis.

  • Proteins: Heat, acids, and phenols denature or disrupt enzymes and structural proteins.

Examples and Applications

  • Sterilization: Autoclaving surgical tools

  • Disinfection: Bleach on surfaces

  • Antisepsis: Iodine on skin before surgery

  • Sanitization: Washing dishes with detergent

Additional info: Prions are the most resistant to control methods, followed by endospores, then vegetative cells.

Methods of Physical Control

Section 11.2: Physical Methods

Physical methods are widely used for microbial control, especially when chemical methods are unsuitable. The main physical methods include heat, radiation, filtration, and osmotic pressure.

  • Heat: Most common method. Divided into moist and dry heat.

  • Radiation: Used for sterilizing heat-sensitive materials.

  • Filtration: Removes microbes from air and liquids.

  • Osmotic Pressure: High salt or sugar concentrations inhibit microbial growth.

Moist Heat vs. Dry Heat

  • Moist Heat: Hot water, boiling, steam (60–135°C). Coagulates and denatures proteins. Examples: autoclaving, boiling, pasteurization.

  • Dry Heat: Flame, electric heating coil (160°C and above). Dehydrates and oxidizes cells. Examples: incineration, hot air ovens.

Thermal Death Time and Point

  • Thermal Death Time (TDT): Shortest time to kill all microbes at a set temperature.

  • Thermal Death Point (TDP): Lowest temperature to kill all microbes in 10 minutes.

Other Physical Methods

  • Freezing: Slows microbial activity; some killed at very low temperatures (−70°C to −135°C).

  • Desiccation: Dehydration; only some pathogens killed.

  • Lyophilization: Freeze-drying; preserves microbes for long-term storage.

Radiation

  • Ionizing Radiation: Gamma rays, X-rays, cathode rays. Sterilizes without heat (cold sterilization). Penetrates deeply.

  • Nonionizing Radiation: Ultraviolet (UV) rays (240–280 nm). Causes DNA damage (e.g., thymine dimers), effective for surface sterilization.

Filtration

  • Removes microbes from liquids and air using filters with defined pore sizes (e.g., 0.22 μm for bacteria, 0.02 μm for viruses).

  • Used for heat-sensitive solutions (e.g., antibiotics, vaccines).

Osmotic Pressure

  • High salt or sugar creates a hypertonic environment, causing plasmolysis in bacteria.

  • Used in food preservation (e.g., cured meats, jams).

Table: Comparison of Physical Methods

Method

Mechanism

Example

Moist Heat

Protein denaturation

Autoclaving

Dry Heat

Oxidation, dehydration

Incineration

Radiation (Ionizing)

DNA breakage

Gamma sterilization

Radiation (UV)

DNA dimer formation

Surface sterilization

Filtration

Physical removal

HEPA filters

Osmotic Pressure

Plasmolysis

Salted fish

Additional info: Lower temperatures are less effective with dry heat than with moist heat. Cold temperatures retard growth but do not sterilize.

Methods of Chemical Control

Section 11.3: Chemical Methods

Chemical agents are used to disinfect, sterilize, or sanitize surfaces, instruments, and living tissues. Their effectiveness depends on concentration, exposure time, and the presence of organic matter.

  • Forms: Solid, liquid, or gas. Often dissolved in water (aqueous solutions) or alcohol (tinctures).

  • Desirable Qualities:

    • Rapid action at low concentration

    • Broad-spectrum activity

    • Non-toxic, stable, affordable

    • Penetrates surfaces, not inactivated by organic matter

Major Classes of Chemical Agents

  • Halogens: Chlorine, iodine, bromine, fluorine. Microbicidal and sporicidal. Used in water treatment, disinfectants, antiseptics.

  • Alcohols: Ethanol (70–95%), isopropanol. Used for skin degerming and disinfecting equipment. Evaporate quickly; not effective against spores.

  • Oxidizing Agents: Hydrogen peroxide (3% for antisepsis). Kills by producing free radicals. Effective against anaerobes.

  • Detergents and Soaps: Quaternary ammonium compounds (quats) disrupt membranes. Used for cleaning utensils, restrooms, and as preservatives.

  • Gaseous Sterilants: Ethylene oxide, chlorine dioxide. Used for heat-sensitive materials. Alkylate DNA and proteins.

  • Acids and Alkalis: Acetic, propionic, lactic, benzoic acids. Alter pH; used in food preservation and deodorants.

Table: Chemical Agents and Their Applications

Agent

Target Microbes

Application

Chlorine

Bacteria, viruses, spores

Water disinfection, surfaces

Iodine

Bacteria, spores

Skin antisepsis

Alcohols

Bacteria, fungi, enveloped viruses

Skin, equipment

Hydrogen peroxide

All microbes (high conc.)

Wounds, surfaces

Quats

Some bacteria, fungi, viruses

Cleaning, preservatives

Ethylene oxide

All microbes, spores

Medical devices

Acetic acid

Bacteria, fungi

Food preservation

Examples and Applications

  • Chlorine: Used for disinfecting drinking water and surfaces (WHO recommendation for COVID-19).

  • Alcohol-based hand sanitizers: 60–70% ethanol for hand hygiene.

  • Hydrogen peroxide: Used for wound cleaning and as a surface disinfectant.

  • Quats: Used in ophthalmic solutions and cosmetics as preservatives.

  • Acids: Benzoic and propionic acids used in food preservation.

Additional info: Phenol is no longer widely used due to toxicity. Higher concentrations of alcohol are not always more effective; 70% is optimal for protein denaturation.

Pearson Logo

Study Prep