Question 1

Which of the following is NOT a physical method of microbial control?

Accepted Answer

Use of antibiotics

Question 2

Why is moist heat generally more effective than dry heat for microbial control?

Accepted Answer

Moist heat denatures proteins and destroys cytoplasmic membranes more efficiently because water is a better conductor of heat than air.

Question 3

A laboratory autoclave is set to 121°C. What pressure (in psi above atmospheric pressure) is required to achieve sterilization at this temperature?

Accepted Answer

$$15\ 	ext{psi}$$

Question 4

Which of the following best describes the 'thermal death point'?

Accepted Answer

The lowest temperature at which all cells in a broth are killed in 10 minutes.

Question 5

During autoclaving, why must containers of liquids be sealed loosely rather than tightly?

Accepted Answer

To allow steam to circulate freely and air to escape, ensuring even sterilization.

Question 6

Which of the following statements about boiling as a method of microbial control is TRUE?

Accepted Answer

Boiling kills most vegetative cells within 10 minutes but does not reliably destroy endospores.

Question 7

A hospital needs to sterilize a batch of plastic syringes that cannot withstand high temperatures. Which physical method of microbial control should be used?

Accepted Answer

Filtration

Question 8

Which of the following is a key advantage of using an autoclave over boiling for sterilization?

Accepted Answer

Autoclaves use increased pressure to achieve higher temperatures, allowing destruction of endospores.

Question 9

Which of the following best describes the process of pasteurization?

Accepted Answer

Heating a liquid to a specific temperature for a set time to reduce microbial load without destroying the product.

Question 10

A batch of milk is pasteurized using the high-temperature, short-time (HTST) method. Which of the following statements is correct regarding this process?

Accepted Answer

It reduces the number of pathogenic microorganisms without significantly altering the taste of the milk.

Question 11

Which of the following equations best represents the relationship between pressure and temperature in an autoclave?

Accepted Answer

$$P \uparrow \implies T \uparrow$$

Question 12

A laboratory technician needs to confirm that an autoclave cycle has achieved sterilization. Which of the following is the most reliable indicator?

Accepted Answer

A biological indicator containing endospores of Geobacillus stearothermophilus shows no growth after incubation.

Question 13

Which of the following is a limitation of pasteurization?

Accepted Answer

It does not sterilize; some thermoduric and thermophilic organisms may survive.

Question 14

A scientist is using an autoclave to sterilize a large volume of liquid. What adjustment should be made to ensure effective sterilization?

Accepted Answer

Increase the autoclaving time to allow heat to penetrate the entire volume.

Question 15

Which of the following best explains why boiling is not recommended for sterilizing items that must remain sterile for long periods?

Accepted Answer

Boiling does not destroy all endospores, so some microbes may survive and later grow.

Question 16

Which of the following is a correct statement about the use of pressure in an autoclave?

Accepted Answer

Pressure allows the temperature of steam to rise above 100°C, enabling the destruction of endospores.

Question 17

A researcher is sterilizing nutrient media in an autoclave. Which of the following steps is essential to ensure proper sterilization?

Accepted Answer

Allowing steam to contact all surfaces of the media containers.

Question 18

Which of the following is a real-world example of the importance of pasteurization?

Accepted Answer

Reducing the risk of tuberculosis transmission through milk by killing Mycobacterium bovis.

Question 19

Which of the following best describes the function of a chemical indicator in an autoclave?

Accepted Answer

It changes color when the proper combination of temperature and time has been achieved.

Question 20

A hospital is considering switching from dry heat to moist heat sterilization. Which of the following is a valid reason for this change?

Accepted Answer

Moist heat sterilization is more effective at lower temperatures and shorter times than dry heat.

Physical Methods of Microbial Control: Heat-Related Methods and Applications

Study Guide - Practice Questions

Study Guide - Flashcards