(a) Calculate the density of dinitrogen tetroxide gas 1N2O42
at 1...

Question

(a) Calculate the density of dinitrogen tetroxide gas 1N2O42
at 111.5 kPa and 0 °C.

Accepted Answer

Hey everyone in this example, we have a sample of phosphene gas kept at 8 50 Tour and 35 degrees Celsius. And we need to determine this gasses density. So we're going to use the density form of our ideal gas law where we have our symbol rho for density equal to our pressure of our gas, multiplied by its polarity and then divided by r gas constant R. Times temperature. So from the prompt, we should recognize that we're going to have to convert our pressure from Tour two units of A. T. M. And our temperature from degrees Celsius to kelvin. So starting out with our conversion for pressure, we take the 8 50 tour given from the prompt. And we're going to multiply by the conversion factor to go from Tour to a. T. M. We should recall that for 1 80 M. We have 7 60 tour. So now we're able to cancel out our units for tour, leaving us with a. T. M. As our final unit of pressure. And this gives us our pressure equal to 1.1 to a. T. M's. In the proper units. Now for temperature were given 35 degrees Celsius And we want to go ahead and add to 73.15 Kelvin to convert to Kelvin. And this is going to give us our proper temperature equal to a value of 3.08.15 Kelvin. So now we can go ahead and get into our equation to sulfur density. So what we'll have is that row is equal to in our numerator. We should plug in our pressure, which we converted to 1.1 to a. T. M. This is then multiplied by the molar mass of phosphene. So from our predict table we would see that foss finn has a molar mass equal to a value of 98.91 g per mole. So we're going to plug this in as 91.98 or sorry, .91 g per mole for our Moeller, massive phosphene from the periodic table. And then in our denominator we're going to plug in our ideal gas constant which we should recall a 0.8206 Leaders times a. T. M's divided by moles, times kelvin. This is then going to be multiplied by our temperature which we converted to 308.15 kelvin. And so canceling out our units will be able to get rid of our units of kelvin as well as a T. M. S and also our units of moles. So we're left with grams per leader as our final units, which is what we want for density. And so what we're going to get is a value equal to 4.38 g/s as our final answer to complete this example. So I hope that everything I explained was clear what's boxed in is our final answer for the density of phosphate and gas, if you have any questions just leave them down below and I will see everyone in the next practice video.

(a) Calculate the density of dinitrogen tetroxide gas 1N2O42 at 111.5 kPa and 0 °C.

Watch next